American Journal of Materials Science

American Journal of Materials Science publishes reviews, full-length papers, and short communications recording original research results on, or techniques for studying the relationship between structure, properties, and uses of materials.


ICV 2015: 76.51; ICV 2016: 86.70 h5-index: 10, h5-median: 14
(Based on Google Scholar Metrics(June 2017))

Editor-in-chief: Lenore Dai
p-ISSN: 2162-9382
e-ISSN: 2162-8424

Website: http://journal.sapub.org/materials




Reviewers

Ahmed Aly Diaa SarhanUniversity Malaya, Malaysia
Alok ShuklaNational Institute of Technology, Mizoram, India
Fong Kwong YamUniversiti Sains, Malaysia
M. Asaduzzaman ChowdhuryDepartment of Mechanical Engineering, Dhaka University of Engineering and Technology (DUET), Bangladesh
Dewan Muhammad NuruzzamanDepartment of Mechanical Engineering, Dhaka University of Engineering and Technology, Bangladesh
Vahid MonfaredDepartment of Mechanical Engineering, Zanjan Branch, Islamic Azad University, Zanjan, Iran
Ramasamy GopalakrishnanDepartment ofPhysics, SRM university, Tamilnadu, India
Amin ChegenizadehCurtin University, Australia
Massoud MalakiDepartment of Mechanical Engineering, Iran
Suresh Kumar JakkaDepartment of Physics, University of Aveiro, Aveiro, Portugal, India
J.d.J.A. Flores CuautleCinvestav-ipn electrical engineering department, Mexico
Mohamed KchaouISSAT Sousse, Tunisia
Mandava Venkata Basaveswara RaoKrishna University, India
Lakiza SergijFrantsevich Institute for Problems of Materials Sciences NAS of Ukraine, Ukraine
Michele MariniI.C.R. Industria Chimica Reggiana S.P.A., Italy
Prabhu SethuramalingamSrm University, India
Nguyen Van CuongDepartment of Chemical Engineering, Ho Chi Minh City University of Industry, Vietnam
Adel EldenglaweyFaculty of Sciences,South Valley University, Egypt
Rajni KantUniversity Of Jammu, India
Zerrouki DjamalDepartment of chemical engineering ouargla university Algeria, Algeria
Chunyi ZhiMANA, National Institute for Materials Science, Japan
Assem El-SedfyAin Shams University, Cairo, Egypt
Chenguang LiuNanotek Instruments, Inc., USA
Bharath K NGMIT, Davangere, India
Don GregoryPhysics Department, The University of Alabama in Huntsville, USA
Olga NazarenkoTomsk Polytechnic University, Russia
Khadidja RahmounUniversity of Tlemcen Abou Bakr Belkaid, Algeria
Driss SOUBANEInstitut national de la recherche scientifique-Énergie Matériaux Télécommunications - INRS-EMT, Canada
Purushothaman Kamatchi KamarajTRP Engineering College (SRM group), India
R.Paventhan RajanfamJ.J College of Engineering and Technology, India
Soheil SolhjooMaterials Science and Engineering, Sharif University of Technology, Azadi Ave., Tehran, Iran
Kalidass SureshCity University of Hong Kong, Hong Kong
Kazem TahmasebiPayame Noor University (PNU), Iran
Haddadine NabilaFaculty Of Chemistry, USTHB, Algeria
Maria RaimoConsiglio Nazionale delle Ricerche Istituto di Chimica e Tecnologia dei Polimeri, Italy
Sumeya BEDRANEUniversity of Tlemcen, Chemistry Dpt., Algeria
Iván SánchezCentro de Física, Instituto Venezolano de Investigaciones Científicas, Venezuela
It-Meng (Jim) LowCurtin University, Australia
Mikko HokkaTampere University of Technology, Department of Materials Science, Finland
Mehdi RahimianResearch Assistant In Imdea Materials ( Madrid Institute For Advanced Studies), Spain
Noel HealyOptoelectronics Research Centre, University of Southampton, UK
Rafal KozubskiInstitute of Physics, Jagiellonian University in Krakow, Poland
Abhishek Kumar MishraJawaharlal Nehru Centre For Advanced Scientific Research, India
Moises ParionaState University of Ponta Grossa, Brazil
Morteza GhadimiK.N.Toosi University of Technology, Iran
Bhuvneshwer SutharGovt. College of Engineering & Technology, India
Mohamed Salah KARMOUSFaculty of science of sfax, Tunisia
Justin AkujiezeChicago State University, Chemistry & Physics Department, Chicago, USA
Gabriela KuncovaInstitute of Chemical Process Fundamentals ASCR, Czech Republic
Devi KALLAMetropolitan State College of Denver, USA
Umesh SrivastavaAmity University, India
Hassan JafariUniversiti Teknologi Malyasia, Malaysia
Mehdi MalekanDepartment of Mechanical Engineering, Iran
Seok Woo ChangCenter for Health Promotion, Samsung Medical Center, Sungkyunkwan University School of Medicine, South Korea
Prakash SubramaniamSathybama University, India
Stefanos ZaoutsosTECHNOLOGICAL EDUCATIONAL INSTITUTE OF LARISSA, FACULTY OF APPLIED SCIENCES, DEPARTMENT OF MECHANICAL ENGINEERING, Greece
DR.GIRISH JOSHIPolymer Nanocomposite Lab, Materials Physics Division, School of Advanced Sciences (SAS), VIT University, India
Mona MohsenPhysics Department, Faculty of Science, Ain Shams University, Egypt
Sheng-Po ChangNational Cheng Kung University, Taiwan
Subhash KondawarR.T.M. Nagpur University, Nagpur, India
Taghi Dallali IsfahaniSchool of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Iran
Dr. Krishnamurthy NCMR Institute of Technology, Visvesvaraya Technological University, India
Rajesh PuniaGuru Jambheshwar University of Science and Technology, Hisar, India
Krishna Kumar MishraDepartment of Physics,Lingaya's University, India
ROMUALD INTARTAGLIAIstituto Italiano di Tecnologia, Genova, Italy, Italy
PIYUSH GOHILFACULTY OF TECHNOLOGY & ENGINEERING, CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY, AT & POST CHANGA, TA: PETLAD, DIST: ANAND, GUJARAT, India
GHASIRAM DEYRADIATION AND PHOTOCHEMISTRY DIVISION, BHABHA ATOMIC RESEARCH CENTRE, India
Dr.P.P. SinghInvertis University, India
José de los Santos GuerraInstituto de física - Universidade Federal de Uberlândia, Brazil
Ali MohammedAl-Mustansiriyah University – College of Science – Department of Physics, Iraq
UMAPADA PALInstituto de Física, Benémerita Universidad Autónoma de Puebla, Mexico
NNABUK EDDYAHMADU BELLO UNIVERSITY, XARIA, Nigeria
Salih YILMAZKaradeniz Technical University, Physics Department, Turkey
Beatriz Luci FernandesInstitute Grade of Basic Sciences, Brazil
Steven MeikleUniversity of Brighton, School of Pharmacy and Biomolecular Sciences, UK
Colin WebbGriffith University, Australia
Sawanta MaliShivaji University Kolhapur, India
L.Venkatesan D.LoganathanAnna University, India
ESTHER AKINLABIUNIVERSITY OF JOHANNESBURG, JOHANNESBURG, South Africa
HO SoonminINTI International University, Persiaran Perdana BBN, Malaysia
Gerzon E. DelgadoLaboratorio de Cristalografía, Departamento de Química, Facultad de Ciencias, Universidad de Los Andes, Venezuela
Heider NaszerDepartment of Botany and Plant production, University of Kaposvár, Hungary
Nadir HossainAdvanced Technology Institute, University of Surrey, UK
Sandeep WaghuleyDepartment of Physics, Sant Gadge Baba Amravati University, Amravati, India
BRAJESH KUMARKolhan University, Chaibasa, 833202, INDIA, India
Dr.RAHUL MARUTI MANEShivaji University, Kolhapur, India
Nanjundaswamy Sateesh KumarGHOUSIA COLLEGE OF ENGINEERING, India
Chia-Jen HsuUniversity of Texas at Arlington, USA
Simeng YanUniversity of California,Irvine, USA
Neelabh SrivastavaInstitute for Semiconductor Optics and Functional Interfaces, Stuttgart University, Germany, Germany
Heba Saudyfaculty of science/ El Azhar University, Egypt
Mostafa AmirjanK.N.Toosi University of Technology, Iran
Manas R. PanigrahiKIIT University, India
Jiangsha MengDepartment of Mechanical and Industrial Engineering Northeastern University, USA
NECHITA PETRONELADUNAREA DE JOS UNIVERSITY GALATI ROMANIA, Romania
Sanjukta ChatterjeeDepartment of Materials Engineering,University of British Columbia, Canada
Amin BahramiCentro de Investigación y de Estudios Avanzados del IPN Unidad Saltillo, Av. Industria Metalúrgica, Mexico
Ebad Bagherpour JahromiFaculty of Metallurgical and Materials Engineering, Semnan University, Iran
Jitang FanDelft University of Technology, Netherlands
Kliment HadjovUCTM-Sofia, Bulgaria
Shi-Qiang LIUniversity of Melbourne, Australia
Sumit AshtekarIntel Corporation, USA
Nirali GondaliyaGujarat technological University, India
Tanmoy DuttaSandia National Laboratories, Livermore, California, USA
Gyorgy SzekelySchool of Chemical Engineering & Analytical Science, The University of Manchester, UK
Roozbeh Abedini NassabDepaerment of Mechanical Engineering and Materials Science, Duke University, USA
Roozbeh Abedini-NassabDuke University, Department of Mechanical Engineering and Materials Science, USA
Mohsin MohammedFaculty of Engineering, Mechanical Engineering Department, Kufa University, Iraq
RAMACHANDRA C GSrinivas Institute of Technology, India
Yulong YaoCorning Inc., USA
Shipra PandeyIndian Institute of Technology Bombay, India