International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

Kliment Hadjov

Professor, UCTM-Sofia, Bulgaria

Research Areas

Mechanics of Solids, Mechanics of composites, Thermal conductivity of nanofluids, Applied Mechanics

Publications: Journals

[1]  Hadjov Kl., Modified self-consisted scheme…., Int.Journ.of Th.Sci. 48, 2249-2254, 2009.
[2]  Tavman,Turgut,Chirtoc,Hadjov,Fudym,Tavman Experim.Study...Heat Transfer Research, 2010, Vol.41, No.3, 209-221.
[3]  Hadjov,Dontchev,Hrima,Aleks. On the Integral Equations ...Intern.Journ.of Engineering, t.12, fascicule 2, 2014.
[4]  Hadjov et al.Damage...Acta Technica Corviniensis–Bulletin оf Engineering ISSN: 2067-3809, Fascicule 3, July-September, Tome III, 2010.
[5]  Hallil,Hadjov,Aleksandr.,Milenova Sur une Approximation...Revue de Génie Industriel, ISSN 1313-8871, 5, 2010, 62-67
[6]  Popov K., Mandichev G.,Hadjov Kl Mechanics of Composite Materials N6, Riga, 1979, p.1119-1130.
[7]  Popov K., Hadjov Kl Mechanics of Composite Materials, N1, 1980, p.10-15.Transl.in MCMAD7(1)1-130(1980) , vol.16,No1, p.5-10.
[8]  Hadjov Kl, Popov K., Mandichev G.Mechanics of Composite Materials, Riga, N6, 1981, p.1115-1117.
[9]  Hadjov Kl, Mandichev G., Popov K.Mechanics of Composite Materials, Riga, N2, 1982, p.284-289.
[10]  Popov K.,Hadjov Kl Mechanics of Composite Materials, N3, 1983, p.70-75.
[11]  Popov K.,Hadjov Kl. Mechanics of Composite Materials, Riga, N1,1986, p.60-64.
[12]  Hadjov Kl.&K.G.Popov European Journal Mech.& Env.Eng.Vol.45, N3, 2000, p.131-137.
[13]  Hadjov Kl.European Journal Mech.& Env.Eng.Vol.46, N3 , 2001, p.171-177.
[14]  Hadjov Kl.Journal of thermal sciences, vol.20/4,2003, p.407-416.
[15]  Hadjov Kl Eur.Journ.of Mech.Eng.Vol.48, N4, 2003, p.225-230.
[16]  Hadjov, Dontchev Influence of the…. Journal of Nanoparticle Research, 11, 2009, p.1713–1718.

Publications: Conferences/Workshops/Symposiums

[1]  Popov,Hadjov Kl.V Int.Conf.Deformation, Yield and Fracture of Polymers, Churchill College, Cambridge, 1982, p.69.
[2]  Hadjov Kl.Composites for the Future, ECCM-10, Brugge, 2002.
[3]  Hadjov Kl., A.Aleksandrov, D.Koleva Homogenization of Directionally……….Junior Euromat, Lausanne, 2002.
[4]  Hadjov K., D.Dontchev, Y.Delmas, A.Li Damage Model...17 Congrès Français de Mécanique, Troyes, France,2005.
[5]  Hadjov K., Chirtoc M., Henry J.-F.Sur la Conductivité...18 Congrès Français de Mécanique, Grenoble, France, 2007.
[6]  Pavl.,Gourb.,Rus.,Alex.,Hadjov,Dontchev SPEEDAM 2008-19 Int.Symposium, Ischia-Italy, ISBN: 978-1–4244-1664–6.
[7]  Pavl.,Gourb.,Rus.,Alex.,Hadjov,Dont., 13 Int.Power Electr.&Motion Cont.Conf.EPE-PEMC,Poznan-Poland,Sept.2008.
[8]  Chirt.,Henry,Ant.,Turg.,Hadjov,Pel.,Dole-Thermique d.nanosystèmes et nanomatériaux, Cargèse, Corse, France, 05.2008.
[9]  Tavman,Turg.,Chirt.,Hadjov,Fudym,Tavm.Int.Symp.-Conv.Heat and Mass Transf.in Sust.Energy, Tunisia, April -May 2009.
[10]  Zhelyazov, Dontchev, Li, Hadjov, Delmas Finite element ….19-Congrès Français de Mécanique, Marseille, 24-28 août 2009.
[11]  Chirtoc,Henry,Turgut,Tavman,Hadjov et al.J.Phys.Conf.Series, Proceedings of ICPPP15, Leuven, Belgium, 07.2009.
[12]  Chirtoc, Henry,Turgut,Tavman,Hadjov et al. Assessment of...Journal of Physics: Conference Series 214 (2010)
[13]  Hadjov,Popov K.Charactéristiques effectives ...Composites en polymers 90, partie 1, Petersbourg – Russie, 1990, p.53-56.

Publications: Books/Book Chapters

[1]  Hadjov Kl., Marin M. Mécanique des matériaux, Ed.Universitaria, Craiova, 2002, p.164.
[2]  Hadjov Kl., Velkov N. Technische Mechanik, UCTM, Sofia, 2008.
[3]  Hadjov Kl. Théorie de l’élasticité et de la plasticité, Ed.Universitaire de l’UCTM, Sofia, 2001, p.54.
[4]  Hadjov Kl , Dontchev D. Application des éléments finis en mécanique, Ed.Universitaire de l’UCTM, Sofia, 2003, p.88.