International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.


Ebad Bagherpour Jahromi

PhD Student, Faculty of Metallurgical and Materials Engineering, Semnan University, Iran

Research Areas

Materials Science, Metals Forming,Mechanical Properties of Materials, Metal Matrix Composites, Modeling and Simulation

Publications: Journals

[1]  A. Hassani, E. Bagherpour, F. Qods, “Influence of pores on workability of porous Al/SiC composites fabricated through powder metallurgy + mechanical alloying”, Journal of Alloys and Compounds, 591( 2014) 132–142.
[2]  H.R. Zafarani, A. Hassani, E. Bagherpour, Achieving a desirable combination of strength and workability in Al/SiC composites by AHP selection method, Journal of Alloys and Compounds, 589 (2014) 295-300
[3]  A. Hassani , A. Habibolahzadeh, E. Bagherpour, M. Taheri, Dry Friction and Wear Behavior of In-Situ Al/Al3Ti Composite, Journal of Composite Materials, 2014 vol. 48 no. 9 1049-1059.
[4]  M. Reihanian, E. Bagherpour, M.H. Paydar, On the achievement of uniform particle distribution in metal matrix composites fabricated by accumulative roll bonding, Materials letters, 91 (2013) 59–62.
[5]  E. Bagherpour, M. Reihanianb, R. Ebrahimi, “Processing twining induced plasticity steel through simple shear extrusion”, Materials and Design 40 (2012) 262–267.
[6]  E.Bagherpour ,M. Reihanian, R. Ebrahimi, “On the capability of severe plastic deformation processing of TWIP steel”, Materials and Design 36 (2012) 391–395.
[7]  M. Reihanian, E. Bagherpour, M.H. Paydar, Particles distribution in metal matrix composites fabricated by accumulative roll bonding (ARB), Materials Science and technology, 28(2012)103-108.
[8]  M. Reihanian, E. Bagherpour, M.H. Paydar, A model for volume fraction and particle size selection in tri-modal metal matrix composite, Materials Science and Engineering A, 513-514(2009)172-175.
[9]  M.H. Paydar, M. Reihanian, E. Bagherpour, M. Sharifzade, M. Zarinejad, T.A. Dean, Equal channel angular pressing-forward extrusion (ECAP-FE) consolidation of Al particles, Materials & Design, 30(2009)429-432.
[10]  M.H. Paydar, M. Reihanian, E. Bagherpour, M. Sharifzadeh, M. Zarinejad, T.A. Dean, Consolidation of Al particles through forward extrusion-equal channel angular pressing (FE-ECAP), Materials Letters, 62(2008)3266-3268.

Publications: Conferences/Workshops/Symposiums

[1]  E. Bagherpour, M. Reihanian, R. Ebrahimi, Deformation behavior of TWIP steel during simple shear extrusion (SSE), 3rd International Conference on Ultrafine Grained and Nanostructured Materials, , University of Tehran, Iran, 2-3 November 2011.
[2]  E. Bagherpour, M. Reihanian, R.Ebrahimi, Behavior of the TWIP steel in Severe Plastic Deformation (SPD) Processes, (in Persian) proceedings of steel symposium 89, (March 2011) 213-222.
[3]  M.H. Paydar, M. Reihanian, E. Bagherpour, M. Sharifzade, T.A. Dean, Consolidation of aluminum powders through equal channel angular pressing-forward extrusion (ECAP-FE), First International Conference on Ultrafine Grained and Nanostructured Materials, , University of Tehran, Iran, 17-18 November 2007.
[4]  M.H. Paydar, M. Reihanian, E. Bagherpour, M. Sharifzade, T.A. Dean, Manufacturing bulk material through consolidation of aluminum particles using ECAP-FE, International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Tehran, Iran.