International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

Amin Bahrami

PhD Student, Centro de Investigación y de Estudios Avanzados del IPN Unidad Saltillo, Av. Industria Metalúrgica, Mexico

Research Areas

Composite materials, Hot deformation, Powder Metallurgy, Infiltration, Casting, Aluminum alloys

Education

2012-presentPhD Centro de Investigación y de Estudios Avanzados del IPN Unidad Saltillo, Saltillo, Coahuila, Mexico
2009-2011M.Sc.Imam Khomeini International University, Qazvin, Iran
2004-2008B.Sc. Sahand University of Technology, Tabriz, Iran

Publications: Journals

[1]  A Bahrami, A Razaghian, M Emamy, R Khorshidi: The effect of Zr on the microstructure and tensile properties of hot-extruded Al–Mg2Si composite. Materials and Design, 2012; 36:323-330.
[2]  A Razaghian, A Bahrami, M Emamy: The influence of Li on the tensile properties of extruded in-situ Al–15%Mg2Si composite. Materials Science and Engineering A, 2012; 532:346-353.
[3]  N Soltani, A Bahrami, MI Pech-Canul: The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite. Metallurgical and Materials Transactions A, 2013, 44(9): 4366-4373.
[4]  N Soltani, MI Pech-Canul, A Bahrami: Effect of 10Ce-TZP/Al2O3 nanocomposite particle amount and sintering temperature on the microstructure and mechanical properties of Al/(10Ce-TZP/Al2O3) nanocomposites. Materials and Design, 2013; 50:85-91.
[5]  N Soltani, HR Jafai, A Bahrami, MI Pech-Canul, Wencai Liu, Gouhua Wu: Effect of hot extrusion on wear properties of Al–15 wt.% Mg2Si in situ metal matrix composites. Materials and Design, 2014, 53:774-781.
[6]  H R Jafari, Wencai Liu, Guohua Wu, A Bahrami, MI Pech-Canul, M Emamy: Mechanical and Tribological Characterization of Al-Mg2Si Composites After Yttrium Addition and Heat Treatment. Journal of Materials Engineering and Performance, 2014, 23(4): 1146-1156.
[7]  A Bahrami, A Razaghian, M Emamy, HR Jafari, GS Mousavi: Microstructure and tensile properties of Al-15 wt.% Mg2Si composite after hot extrusion and heat treatment. Key Engineering Materials, 2011, 471:1171-1176.
[8]  HR Jafari, M Emamy, N Nemati, A Bahrami: The influence of Yttrium rich intermetallic phase and heat treatment on the microstructure, hardness and wear properties of Al-15% Mg2Si composite. Key Engineering Materials, 2011, 471: 1165-1170.
[9]  N Soltani, A Bahrami, FM Moghimi, MI Pech-canul, A Hajaghasi: The simultaneous effect of extrusion and T6 treatment on the mechanical properties of Al-15wt.% Mg2Si. HTM journal of heat treatment and material, 2012; 67(6): 378-385.
[10]  N Soltani, SK Sadrnezhaad, A Bahrami: Powder metallurgical production and characterization of Al matrix 10Ce-TZP/Al2O3 nanocomposite, Materials and manufacturing processes, 2014, Accepted.
[11]  A Bahrami, N Soltani, MI Pech-canul: Effect of sintering temperature on tribological behavior of Al- Ce-TZP/Al2O3 nanocomposite. Journal of materials engineering and performance, 2014, submitted.
[12]  A Bahrami, N Soltani, MI Pech-Canul, CA Gutierrez: Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives- A Review, Composite Part A, 2014, Submitted.
[13]  N Soltani, A Bahrami, MI Pech-Canul: A review on the physicochemical treatments of rice husk for production of advanced material. Chemical Engineering, 2014, Proposal Accepted.

Publications: Conferences/Workshops/Symposiums

[1]  N Solatani, A Bahrami, MI Pech-Canul: WEAR CHARACTERISTICS OF ALUMINUM MATRIX NANOCOMPOSITES WITH Ce-TZP/Al203 NANOCOMPOSITE PRODUCED BY POWDER METALLURGY AT DIFFERENT SINTERING TEMPERATURES. TMS 2013 (The Minerals, Metals & Materials Society), San Antonio, TX, USA.
[2]  N Soltani, A Bahrami, MI Pech‐Canul, A Razaghian, M Emamy: The Effect of Ti on Mechanical Properties of Extruded In‐Situ Al‐15% Mg2Si Composite. TMS 2013 (The Minerals, Metals & Materials Society), San Antonio, TX, USA.
[3]  A Bahrami, A Razaghian, M Emamy, HR Jafari, GS Mousavi,“Microstructure and tensile properties of Al-15wt% Mg2Si composite after hot extrusion and heat treatment”, ICCST8, 2011, Malaysia.
[4]  HR Jafari, M Emamy, N Nemati, A Bahrami, “The influence of Yttrium rich intermetallic phases and heat treatment on the microstructure, hardness and wear properties of Al-15%Mg2Si composite”, ICCST8, 2011, Malaysia.
[5]  A Bahrami, M Emamy. A Razaghian, “The Simultaneous Effects of Li and Hot Extrusion on the Tensile Properties of In-situ Al-15%Mg2Si Composite”, IMES, 2011, Iran.
[6]  A Bahrami, FM Moghimi, M Emamy, N Soltani, A Hajaghassi, MI Pech-Canul, “The effect of T6 treatment on the tensile properties of hot extruded Al–15wt. %Mg2Si metal matrix composite”, SAMPE, 2012, Baltimore (MD), USA.
[7]  FM Moghimi, M Emamy, A Hajaghassi, A Bahrami, A Sedghi, MI Pech-Canul, “The influence of Zn on the tensile properties of extruded in-situ Al-15%Mg2Si-0.3% Li composite”, SAMPE, 2012, Baltimore (MD), USA.
[8]  A Hajaghasi, M Emamy, A Bahrami, MI Pech-Canul, “The Effects of Extra Si and Heat Treatment on the Microstructure and Tensile Properties of Al-15%Mg2Si In-Situ Composite”, SAMPE, 2012, Baltimore (MD), USA.
[9]  N Soltani, ST Hashemi, SK Sadrnejad. A Bahrami, “The effect of Ce-TZP/Al2O3 nanocomposite particle amount on properties of Al- CeTZP/Al2O3 nanocomposite”, IIAC, 2012, Iran.