International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

Erdogan Madenci

Editorial Board Member of International Journal of Composite Materials

Professor, Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, AZ, USA

Research Areas

Computational analysis of composites

Education

1987Ph.D.University of California, Los Angeles, Engineering Mechanics
1982M.S.Lehigh University, Applied Mechanics
1981, 1980B.S.Lehigh University, Industrial Engineering and Mechanical Engineering

Experience

8/89 - dateDepartment of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, Arizona: Assistant Professor 8/89-8/94; Associate Professor 8/94-8/98; Associate Head 8/98-10/01; Professor 8/98-date
10/89 - dateMember, Faculty of Applied Mathematics Program, The University of Arizona
1/03 - 7/03Visiting Scientist, Mechanics and Durability Branch, NASA Langley Research Center, Hampton, VA (sabbatical)
1/96 - 8/96Visiting Professor, Department of Aeronautics, The Royal Institute of Technology, Sweden (sabbatical)
9/88 - 8/89Visiting Scientist, The Fraunhofer Institute für Werkstoffmechanik, Freiburg, Germany
9/87 - 6/88Faculty Member (Part Time), Department of Aerospace, Mechanical and Nuclear Engineering, University of California Los Angeles
9/83 - 6/86Faculty Member (Part Time), Department of Mechanical Engineering, California State University Long Beach
6/80 - 6/83Research/Teaching Assistant, Institute of Solid and Fracture Mechanics, Lehigh University and University of California—Los Angeles

Academic Achievement

University of Arizona, College of Engineering Faculty Fellowship, 2011
Lockheed Martin Student Paper Award at 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Student: Abigail Agwai, 2010.
Intel Best Student Paper at 58th Electronic Components and Technology Conference, Student: Abigail Agwai, 2008.
Best in Session: Interconnect Reliability at Techcon Conference, Semiconductor Research Corporation, Student: Abigail Agwai, 2008.
NASA - ASEE Summer Faculty Fellowship, NASA Langley (1993, 1994)
Lehigh University Kingsley Fellowship (1982 - 83)
Sumerbank Scholarship to study in the U.S.A., awarded to three highest ranking students in nationwide exams (1976 - 80)

Membership

Member of Technical Program Committee and Chair of session on “Thermo-Mechanical Modeling and Simulation,” 45th Electronic Components and Technology Conference, May 1995, Las Vegas.
Organized a symposium on “Nonlinear Analysis of Structural Components,” ASME Joint Applied Mechanics and Materials Summer Conference, June 1995, University of California, Los Angeles.
Member of Technical Program Committee and Chair of session on “Thermo-Mechanical Modeling and Simulation,” 46th Electronic Components and Technology Conference, May 1996, Orlando, Florida.
Member of Technical Program Committee and Chair of session on “Thermo-Mechanical Modeling and Simulation,” 47th Electronic Components and Technology Conference, May 1997, San Jose, California.
Organized sessions on “Computational Methods for Interlaminar Stress” and “Thick Composite Analysis and Finite Element Technology,” Fourth US National Congress on Computational Mechanics, August 1997, San Francisco, California.
Member of Technical Program Committee and Chair of session on “Thermo-Mechanical Modeling and Simulation,” 48th Electronic Components and Technology Conference, May 1998, Seattle, Washington.
Member of Technical Program Committee and Chair of session on “Thermo-Mechanical Modeling and Simulation,” 49th Electronic Components and Technology Conference, May 1999, San Diego, California.
Member of Technical Program Committee and Co-Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermo-Mechanical Modeling and Simulation,” 50th Electronic Components and Technology Conference, May 2000, Las Vegas, Nevada.
Member of Technical Program Committee and Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermo-Mechanical Modeling and Simulation,” 51th Electronic Components and Technology Conference, May 2001, Orlando, Florida.
Member of Technical Program Committee and Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermo-Mechanical Modeling and Simulation,” 52th Electronic Components and Technology Conference, May 2002, San Diego, California.
Member of Technical Program Committee, EuroSimE 2002 Conference, Paris, France.
Member of Technical Program Committee and Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermo-Mechanical Modeling and Simulation,” 53th Electronic Components and Technology Conference, May 2003, New Orleans, Louisiana.
Member of Technical Program Committee, EuroSimE 2003 Conference, Aix-EN-provence, France.
Member of Technical Program Committee and Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermo-Mechanical Modeling and Simulation,” 54th Electronic Components and Technology Conference, May 2004, Las Vegas, Nevada.
Member of Technical Program Committee, EuroSimE 2004 Conference, Brussels, Belgium.
Member of Technical Program Committee and Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermo-Mechanical Modeling and Simulation,” 55th Electronic Components and Technology Conference, June 2005, Lake Buena Vista, Florida.
Chair of Session on "Optimal Design of Bolted Joints"; 3rd MIT Conference, June 2005, Boston, Massachusetts.
Member of Technical Program Committee and Co-Chair of Symposium on "Modeling and Simulation"; 58th Electronic Components and Technology Conference, May 2008, Lake Buena Vista, Florida.
Member of Technical Program Committee and Co-Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermomechanical Modeling and Characterization,” 59th Electronic Components and Technology Conference, June 2009, San Diego, California.
Member of Technical Program Committee and Co-Chair of Symposium on "Modeling and Simulation"; Chair of session on “Thermomechanical Modeling and Characterization,” 60th Electronic Components and Technology Conference, June 2010, Las Vegas, Nevada.

Publications: Journals

[1]  Sih, G. and Madenci, E., 1983, “Crack Initiation under Gross Yielding: Strain Energy Density Function,” Engineering Fracture Mechanics, Vol. 18, pp. 667 677.
[2]  Sih, G. and Madenci, E., 1983, “Crack Growth Resistance Characterized by the Strain Energy Density Function,” Engineering Fracture Mechanics, Vol. 18, pp. 1159 1171.
[3]  Sih, G. and Madenci, E., 1983, “Discussion on ‘A Further Examination on the Application of the Strain Energy Density Theory to the Angled Crack Problem’,” ASME Journal of Applied Mechanics, Vol. 50, pp. 234 236.
[4]  Sih, G. and Madenci, E., 1985, “Prediction of Failure in Weldments—Part I: Smooth Joint,” Theoretical and Applied Fracture Mechanics, Vol. 3, pp. 23 29.
[5]  Sih, G. and Madenci, E., 1985, “Prediction of Failure in Weldments—Part II: Joint with Initial Notch and Crack,” Theoretical and Applied Fracture Mechanics, Vol. 3, pp. 31 40.
[6]  Madenci, E. and Westmann, R. A., 1991, “Local Delamination Buckling in Layered Systems,” ASME Journal of Applied Mechanics, Vol. 58, pp. 157 166.
[7]  Madenci, E., 1991, “Delamination Growth and Buckling in an Orthotropic Strip,” International Journal of Solids and Structures, Vol. 27, pp. 1773 1788.
[8]  Madenci, E., 1991, “Slightly Open, Penny Shaped Crack in an Infinite Solid Under Biaxial Compression,” Theoretical and Applied Fracture Mechanics, Vol. 16, pp. 215 222.
[9]  Madenci, E. and Klemm, W., 1992, “Compression Induced Failure of a Glassy Material with a Crack Like Defect,” Engineering Fracture Mechanics, Vol. 41, pp. 443 452.
[10]  Madenci, E. and Ileri, L., 1993, “Modified Mapping Collocation Method Revisited,” Engineering Fracture Mechanics, Vol. 44, pp. 127 136.
[11]  Madenci, E., Ileri, L., and Kudva, J. N., 1993, “Analysis of Finite Composite Laminates with Holes,” International Journal of Solids and Structures Vol. 30, pp. 825 834.
[12]  Madenci, E. and Ileri, L., 1993, “Analytical Determination of Contact Stresses in Mechanically Fastened Composite Laminates with Finite Boundaries,” International Journal of Solids and Structures, Vol. 30, pp. 2469 2484.
[13]  Madenci, E. and Ileri, L., 1993, “An Arbitrarily Oriented, Rigid, Elliptic Inclusion in a Finite Anisotropic Medium,” International Journal of Fracture, Vol. 62, pp. 341 354.
[14]  Madenci, E. and Westmann, R. A., 1993, “Local Delamination Growth in Layered Systems Under Compressive Load,” ASME Journal of Applied Mechanics, Vol. 60, pp. 895 902.
[15]  Madenci, E. and Barut, A., 1994, “Pre and Postbuckling Response of Curved, Thin Composite Panels with Cutouts Under Compression,” International Journal for Numerical Methods in Engineering, Vol. 37, pp. 1499 - 1510.
[16]  Madenci, E. and Barut, A., 1994, “Thermal Postbuckling Analysis of Cylindrically Curved Composite Laminates with a Hole,” International Journal for Numerical Methods in Engineering, Vol. 37, pp. 2073 -2091.
[17]  Madenci, E. and Barut, A., 1994, “A Free Formulation Based Flat Shell Element for Nonlinear Analysis of Thin Composite Structures,” International Journal for Numerical Methods in Engineering, Vol. 37, pp. 3825-3842.
[18]  Madenci, E., Ileri, L., and Starnes, J., 1995, “Analysis of a Pin Loaded Hole in Composite Laminates Under Combined Bearing Bypass and Shear Loading,” International Journal of Solids and Structures, Vol. 32, pp. 2053-2062.
[19]  Madenci, E., Balkan, H., and Quan, M., 1995, “Biaxial Compression of a Thin Layer with Circular Debonding Over a Substrate,” International Journal of Solids and Structures, Vol. 32, pp. 3465-3477.
[20]  Madenci, E. and Barut, A., 1996, “Dynamic Response of Thin Composite Shells Experiencing Nonlinear Elastic Deformations and Large Overall Motions,” International Journal for Numerical Methods in Engineering, Vol. 39, pp. 2695-2723.
[21]  Barut, A., Madenci, E., and Tessler, A., 1996, “Nonlinear Elastic Deformations of Moderately Thick Laminated Shells Subjected to Large and Rapid Rigid-Body Motion,” Finite Elements in Analysis and Design, Vol. 22, pp. 41-57.
[22]  Barut, A., Madenci, E., and Tessler, A., 1997, “Nonlinear Analysis of Laminates Through a Mindlin-Type Shear Deformable Shallow Shell Element,” Computer Methods in Applied Mechanics and Engineering, Vol. 143, pp. 155-173.
[23]  Barut, A., Madenci, E., Britt, V. O., and Starnes, J. H., Jr., 1997, “Buckling of a Thin Tension-Loaded Composite Plate with an Inclined Crack,” Engineering Fracture Mechanics, Vol. 58, pp. 233-248.
[24]  Kabir, H., Madenci, E., and Ortega, A., 1998, “Numerical Solution of Integral Equations with Logarithmic, Cauchy and Hadamard Type Singularities,” International Journal for Numerical Methods in Engineering, Vol. 41, pp. 617-638.
[25]  Anderson, T., Madenci, E., Burton, W. S., and Fish, J. C., 1998, “Analytical Solution of Finite-Geometry Composite Panels Under Transient Surface Loading,” International Journal of Solids and Structures, Vol. 35, pp. 1219-1239.
[26]  Madenci, E., Shkarayev, S., Sergeev, B., Oplinger, D. W., and Shyprykevich, P., 1998, “Analysis of Composite Laminates with Multiple Fasteners, International Journal of Solids and Structures, Vol. 35, pp. 1793-1811.
[27]  Persson, E. and Madenci, E., 1998, “Composite Laminates with Elliptical Pin-Loaded Holes,” Engineering Fracture Mechanics, Vol. 61, pp. 279-295.
[28]  Persson, E., Madenci, E., and Eriksson, I., 1998, “Delamination Initiation of Laminates with Pin-Loaded Holes,” Theoretical and Applied Fracture Mechanics, Vol. 30, pp. 87-101.
[29]  Madenci, E., Shkarayev, S., and Sergeev, B., 1998, “Thermo-Mechanical Stresses for a Triple Junction of Dissimilar Materials: Global-Local Finite Element Analysis,” Theoretical and Applied Fracture Mechanics, Vol. 30, pp. 103-117.
[30]  Madenci, E., Shkarayev, S., and Mahajan, R., 1998, “Potential Failure Sites in a Flip-Chip Package With or Without Underfill,” ASME Journal of Electronic Packages, Vol. 120, pp. 336-341.
[31]  Balkan, H. and Madenci, E., 1998, “Thermal Loading of a Thin Layer with Circular Debonding Over a Substrate,” International Journal of Fracture, Vol. 91, pp. 217-231.
[32]  Madenci, E., Shkarayev, S., and Sergeev, B., 1998, “Boundary Collocation Method for Multiple Defect Interactions in an Anisotropic Finite Region,” International Journal of Fracture, Vol. 94, pp. 339-355.
[33]  Savruk, M. P., Madenci, E., and Shkarayev, S., 1999, “Singular Integral Equations of the Second Kind with Generalized Cauchy-Type Kernels and Variable Coefficients,” International Journal of Numerical Methods in Engineering, Vol. 45, pp. 1457-1470.
[34]  Sergeev, B., Madenci, E., and Ambur, D. R., 1999, “Stress Intensity Factors for an Arbitrarily Oriented Crack Near a Hole in a Longeron Web,” Theoretical and Applied Fracture Mechanics, Vol. 31, pp. 213-222.
[35]  Guven, I., Chan, C. L., and Madenci, E., 1999, “Transient Thermal Analysis of Electronic Packages by Boundary Element Method,” IEEE Transactions on Components and Manufacturing Technology, Part B: Advanced Packaging, Vol. 22, pp. 476-486.
[36]  Savruk, M. P., Shkarayev, S., and Madenci, E., 1999, “Stress Near Apex of Dissimilar Materials with Bilinear Behavior,” Theoretical and Applied Fracture Mechanics, Vol. 31, pp. 203-212.
[37]  Razi, H., Sergeev, B., Shkarayev, S., and Madenci, E., 1999, “Analysis of Sandwich Panels with Multiple-Site Damage,” Engineering Fracture Mechanics, Vol. 64, pp. 255-268.
[38]  Sergeev, B., Madenci, E., and Ambur, D. R., 2000, “Influence of Bolt Spacing and Degree of Laminate Anisotropy in Single-Lap Joints,” Computers and Structures, Vol. 76, pp. 89-103.
[39]  Barut, A., Madenci, E., and Tessler, A., 2000, “Nonlinear Thermoelastic Analysis of Composite Panels Under Non-Uniform Temperature Distribution,” International Journal of Solids and Structures, Vol. 37, pp. 3681-3713.
[40]  Barut, A., Madenci, E., Tessler, A., and Starnes, J. H., Jr., 2000, “A New Stiffened Shell Element for Geometrically Nonlinear Analysis of Composite Laminates,” Computers and Structures, Vol. 77, pp. 11-40.
[41]  Anderson, T., Guven, I., Madenci, E., and Gustafsson, G., 2000, “The Necessity of Reexamining Previous Life Prediction Analyses of Solder Joints in Electronic Packages,” IEEE Transactions on Components and Manufacturing Technology, Part B: Advanced Packaging, Vol. 23, pp.516-520.
[42]  Anderson, T. and Madenci, E., 2000, “Graphite/Epoxy Foam Sandwich Panels Under Quasi-Static Indentation,” Engineering Fracture Mechanics, Vol. 67, pp. 327-342.
[43]  Anderson, T. and Madenci, E., 2000, “Experimental Investigation of Low-Velocity Impact Characteristics of Sandwich Composites,” Composite Structures, Vol. 50, pp. 239-247.
[44]  Sburlati, R., Madenci, E., and Guven, I., 2000, “Local Buckling of a Circular Interface Between a Layer and a Substrate with Finite Thickness,” ASME Journal of Applied Mechanics, Vol. 67, pp.590-596.
[45]  Shkarayev, S., Madenci, E., Ibnabdeljalil, M., and Savruk, M. P., 2001, “Analytical Stress Singularities for a Crack at a Bi- or Triple Junction of Dissimilar Materials with Bilinear Behavior,” Engineering Fracture Mechanics, Vol. 68, pp. 475-486.
[46]  Barut, A., Madenci, E., Heinrich, J, and Tessler, A., 2001, “Analysis of Thick Sandwich Construction by a {3,2}-Order Theory,” International Journal of Solids and Structures,Vol. 38, pp. 6063-6077.
[47]  Madenci, E., Barut, A., and Nemeth, M. P., 2001, “A Complex Potential-Variational Method for Stress Analysis of Unsymmetric Laminates with an Inclined Cutout,” ASME Journal of Applied Mechanics , Vol. 68, pp.731-739.
[48]  Hanauska, J., Kradinov, V., and Madenci, E., 2001, “A Composite Double-Lap Joint with Staggered Bolts: An Experimental and Analytical Investigation,” Composite Structures, Vol. 54, pp. 3-15.
[49]  Kradinov, V., Barut, A., Madenci, E., and Ambur, A. R., 2001, “Bolted Double-Lap Composite Joints Under Mechanical and Thermal Loading,” International Journal of Solids and Structures, Vol. 38, pp. 7801-7837.
[50]  Barut, A., Guven, I., and Madenci, E., 2001, “Analysis of Singular Stress Fields at Junctions of Multiple Dissimilar Materials Under Mechanical and Thermal Loading,” International Journal of Solids and Structures, Vol. 38, pp. 9077-9109.
[51]  Kay, N., Barut, A., and Madenci, E., 2002, “Singular Stresses in a Finite Region of Two Dissimilar Viscoelastic Materials with Traction-Free Edges,” Computer Methods in Applied Mechanics and Engineering, Vol. 191, pp. 1221-1244.
[52]  Barut, A., Hanauska, J., Madenci, E., and Ambur, D. R., 2002, “Analysis Method for Bonded Patch Repair of a Skin with a Cutout,” Composite Structures, Vol. 55, pp. 277-294.
[53]  Descour, M. R., Karkkainen, A.H.O., Rogers, J. D., Liang, C., Kilic, B., Madenci, E., Rantala, T. J., Richards-Kortum, R. R., Anslyn, E. V., and Dupuis, R.,D., 2002, “Towards the Development of Miniaturized Imaging Systems for Detection of Pre-Cancer,” IEEE Journal of Quantum Electronics, Vol. 38, pp. 122-130.
[54]  Kradinov, V., Hanauska, J., Barut, A., Madenci, E., and Ambur, D. R., 2002, “Bolted Patch Repair of Composite Panels with a Cutout,” Composite Structures, Vol. 56, pp. 423-444.
[55]  Barut, A., Madenci, E., Anderson, T., and Tessler, A., 2002, “Equivalent Single-Layer Theory for a Complete Stress Field in Sandwich Panels under Arbitrarily Distributed Loading,” Composite Structures, Vol. 58, pp. 483-495.
[56]  Guven, I., Madenci, E., 2003, "Transient Heat Conduction Analysis in a Piecewise Homogeneous Domain by a Coupled Boundary and Finite Element Method," International Journal for Numerical Methods in Engineering, Vol. 56, pp. 351-380.
[57]  Guven, I., Madenci, E., 2003, "Thermoelastic Stress Field in a Piecewise Homogeneous Domain under Non-uniform Temperature Using a Coupled Boundary and Finite Element Method," International Journal for Numerical Methods in Engineering, Vol. 56, pp. 381-403.
[58]  Guven, I., Madenci, E and Chan, C. L., 2003, “Transient Two-Dimensional Heat Conduction Analysis of Electronic Packages by Coupled Boundary and Finite Element Methods,” IEEE Transactions on Components and Packaging Technologies, Vol. 25, pp. 684-694.
[59]  Mahajan, R., Erdogan, F., Kilic, B., and Madenci, E, 2003, “Cracking of an Orthotropic Substrate Reinforced by an Orthotropic Plate,” International Journal of Solids and Structures, Vol. 40, pp 6389-6415
[60]  Barut, A. and Madenci, E., 2004, “Thermo-mechanical Stress Analysis of Laminates with a Cutout by a Complex Potential-Variational Method,” Journal of Thermal Stresses, Vol. 27, pp. 1-31.
[61]  Guven, I., Kradinov, V., Madenci, E., and Tor, J.L., 2004, “Solder Joint Life Prediction Model Based on the Strain Energy Density Criterion,” ASME Journal of Electronic Packages, Vol. 126, pp.1-8.
[62]  Kradinov, V., Madenci, E., and Ambur, D. R., 2005, “Bolted Lap Joints of Laminates with Varying Thickness and Metallic Inserts,” Composite Structures, Vol. 68, pp. 75-85.
[63]  Das, M., Barut, A., Madenci, E., and Ambur, D.R., 2005, “Complete Stress Field in Sandwich Panels with a New Triangular Finite Element of Single-Layer Theory,” Computer Methods in Applied Mechanics and Engineering, Vol. 194, pp. 2969-3005.
[64]  Oterkus, E., Barut, A., Madenci, E. and Ambur, D. R., 2005, “Nonlinear Analysis of a Composite Panel with a Cutout Repaired by a Bonded Tapered Composite Patch,” International Journal of Solids and Structures, Vol 42, pp. 5274-5306.
[65]  Kilic, B., Madenci, E. and Mahajan, R., 2006, “Energy Release Rate and Crack Surface Contact Zone by Hyper-singular Integral Equations,” International Journal of Solids and Structures, Vol. 43, pp. 1159-1188.
[66]  Oterkus, E., Barut, A., Madenci, E., Smeltzer III, S.S. and Ambur, D. R., 2006, “Bonded Lap Joints of Composite Laminates with Tapered Edges,” International Journal of Solids and Structures, Vol. 43, pp. 1459-1489.
[67]  Kay, N. R., Ghosh, S., Guven, I. and Madenci, E., 2006, “A Combined Experimental and Analytical Approach for Interface Fracture Parameters between Dissimilar Materials in Electronic Packages,” Journal of Materials Science and Engineering A, Vol. 421, pp. 57-67.
[68]  Kilic, B., Madenci, E. and Ambur, D. R., 2006, “Influence of Adhesive Spew in Bonded Single-Lap Joints,” Engineering Fracture Mechanics, Vol. 73, pp. 1472-1490.
[69]  Das, M., Guven, I. and Madenci, E., 2006, “Coupled BEM and FEM Analysis of Functionally Graded Material Layers,” Journal of Thermal Stresses, Vol. 29, pp. 263-287.
[70]  Barut, A., Guven, I. and Madenci, E., 2006, “A Meshless Grain Element for Micromechanical Analysis with Crystal Plasticity,” International Journal for Numerical Methods in Engineering, Vol. 67, pp. 17-65.
[71]  Das, M., Barut, A., Madenci, E., and Ambur, D.R., 2006, “A Triangular Plate Element for Thermo-elastic Analysis of Sandwich Panels with a Functionally Graded Core” International Journal for Numerical Methods in Engineering, Vol. 68, pp. 940-966.
[72]  Kradinov, V., Madenci, E., and Ambur, D. R., 2007, “Application of Genetic Algorithm for Optimum Design of Bolted Composite Lap Joints,” Composite Structures, Vol. 77, pp. 148-159.
[73]  Kradinov, V., Madenci, E. and Ambur, D. R., 2007, “Combined in-plane and through-the thickness analysis for failure prediction of bolted composite joints,” Composite Structures, Vol. 77, pp. 127-147.
[74]  Kilic, B. and Madenci, E., 2007, “Hypersingular Integral Equations for the Solution of Penny-shaped Interface Cracks,” Journal of Mechanics of Materials and Structures, Vol. 2, pp. 729-752.
[75]  Oterkus, E., Madenci, E. and Nemeth. M. P., 2007, “Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout,” Journal of Mechanics of Materials and Structures, Vol. 2, pp. 695-751.
[76]  Gordnian, K., Hadavinia, H., Mason, P., and Madenci, E., 2008, “Determination of Fracture Energy and Cohesive Strength in Mode I Delamination of Angle-Ply Laminated Composites” Composite structures, Vol. 82, pp. 577-586.
[77]  Poore, A. L., Barut, A., and Madenci, E., 2008, “Free vibration of laminated cylindrical shells with a circular cutout,” Journal of Sound and Vibration, Vol. 312, pp. 55-73.
[78]  Barut, A., and Madenci, E., 2009, “Analysis of bolted–bonded composite single-lap joints under combined in-plane and transverse loading” Composite structures, Vol. 88, pp 579-594.
[79]  Das, M., Oterkus, E., Madenci, E., and Razi, H., 2009, “Residual strength of sandwich panels with hail damage” Composite structures, Vol. 88, pp. 403-412.
[80]  Das, M., Madenci, E., and Ambur, D. R., 2009, “Three-dimensional nonlinear analyses of scarf repair in composite laminates and sandwich panels,” Journal of Mechanics of Materials and Structures, Vol. 3, pp. 1641-1658.
[81]  Kilic, B., Agwai, A. and Madenci, E., “Peridynamic Theory for Progressive Damage Prediction in Centre-Cracked Composite Laminates” Composite structures, Vol. 90, 2009, pp. 141-151.
[82]  Das, M., Barut, A., and Madenci, E., “Analysis of Multibody Systems Experiencing Large Elastic Deformations,” Multibody System Dynamics, 2009, DOI 10.1007/s11044-009-9168-0.
[83]  Kilic, B., and Madenci, E., “Prediction of Crack Paths in a Quenched Glass Plate by Using Peridynamic Theory,” International Journal of Fracture, Vol. 156, 2009, pp. 165-177.
[84]  Celik, E., Guven, I., and Madenci, E., “Experimental and Numerical Characterization of Non-Fickian Moisture Diffusion in Electronic Packages,” IEEE Transactions on Advanced Packaging, Vol. 32, 2009, pp. 666-674.
[85]  Kilic, B., and Madenci, E., “Structural Stability and Failure Analysis Using Peridynamic Theory,” International Journal of Non-Linear Mechanics, Vol. 44, 2009, pp. 845-854.
[86]  Kilic, B., and Madenci, E., “Peridynamic Theory for Thermomechanical Analysis,” IEEE Transactions on Advanced Packaging, Vol. 33, 2010, pp. 97-105.
[87]  Kilic, B., and Madenci, E., “An Adaptive Dynamic Relaxation Method for Quasi-static Simulations using the peridynamic theory,” Theoretical and Applied Fracture Mechanics, Vol. 53, 2010, pp. 194-201.
[88]  Barut, A. and Madenci, E., “A Complex Potential-Variational Formulation for Thermo-Mechanical Buckling Analysis of Flat Laminates with an Elliptic Cutout,” Composite structures, Vol. 92, 2010, pp. 2871-2884.
[89]  Kilic, B., and Madenci, E., “Coupling of Peridynamic Theory and Finite Element Method,” Journal of Mechanics of Materials and Structures, Vol. 5, 2010, pp. 707–733.
[90]  Celik, E., Guven, I. and Madenci, E., “Mechanical characterization of nickel nanowires by using a customized atomic force microscope,” Journal of Nanotechnology, Vol. 22, 2011, DOI: 10.1088/0957-4484/22/15/155702.
[91]  Celik, E., Guven, I. and Madenci, E., “Simulations of nanowire bend tests for extracting mechanical properties,” Theoretical and Applied Fracture Mechanics, Vol. 55, 2011, pp. 185-191
[92]  Agwai, A. Guven, I. and Madenci, E., “Predicting Crack Propagation with Peridynamics: A Comparative Study,” International Journal of Fracture, Vol. 171, 2011, pp. 65-78.
[93]  Agwai, A. Guven, I. and Madenci, E., “Crack Propagation in Multilayer Thin-film Structures of Electronic Packages Using Peridynamic Theory,” Microelectronics reliability, Vol. 51, 2011, pp. 2298-2305..
[94]  Barut, A., Madenci, E. and Nemeth, M., “Stress and Buckling Analyses of Laminates with a Cutout Using a {3,0}- Plate Theory” Journal of Mechanics of Materials and Structures, Vol. 6, 2011, pp. 827–868.
[95]  Oterkus, E., Madenci, E., Weckner, O., Silling, S., Bogert, P. and Tessler, A., “Combined finite element and peridynamic analyses for predicting failure in a stiffened composite curved panel with a central slot,” Composite Structures, Vol. 94, 2012, pp. 839-850.
[96]  Oterkus, E. and Madenci, E., “Peridynamic Analysis of Fiber Reinforced Composite Materials,” Journal of Mechanics of Materials and Structures, Vol. 7, 2012, pp. 45-84.
[97]  Agwai, A. Guven, I. and Madenci, E., “Drop-Shock Failure Prediction in Electronic Packages by Using Peridynamic Theory,” IEEE Transactions on Components, Packaging and Manufacturing Technology, 2012, Vol. 2, pp. 439-447.
[98]  Oterkus, E. and Madenci, E., “Peridynamic Theory for Damage Initiation and Growth In Composite Laminate,” Key Engineering Materials, Vol. 488-489, 2012, 355-358.
[99]  Oterkus, E., Guven, I. and Madenci, E., “Impact Damage Assessment by Using Peridynamic Theory,” Central European Journal of Engineering, accepted.

Publications: Conferences/Workshops/Symposiums

[1]  Mahajan, R., Madenci, E., Ileri, L., and Thurston, M., 1995, “Stress Concentrations in Electronic Packaging,” Material Research Society Symposium Proceedings, San Francisco, California, Vol. 390, pp. 39-48.
[2]  Ileri, L. and Madenci, E., 1995, “Crack Initiation and Growth in Electronic Packages,” Proceedings of the 45th Electronic Components and Technology Conference, Las Vegas, Nevada, pp. 970-975.
[3]  Madenci, E., Shkarayev, S., Sergeev, B., Oplinger, D. W., and Shyprykevich, P., 1996, “Analysis of Composite Laminates with Multiple Fasteners,” Proceedings, 11th DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, Forth Worth, Texas, Vol. 1, pp. VII1.15-53.
[4]  Ozen, M., Madenci, E., Yu, L., and Mahajan, R., 1996, “Fracture Mechanics Analysis of Electronic Packages,” Proceedings, 7th International ANSYS Conference and Exhibition, Pittsburgh, PA, Vol. 3, pp. 425-432.
[5]  Barut, A., Madenci, E., Starnes, J. H., Jr., and Tessler, A., 1997, “Stiffened Curved Panels with an Inclined Crack Under Tension,” Fourth US National Congress on Computational Mechanics, San Francisco, California.
[6]  Barut, A., Madenci, E., and Tessler, A., 1997, “Nonlinear Analysis of Moderately Thick Laminates Subjected to Non-Uniform Temperature,” Fourth US National Congress on Computational Mechanics, San Francisco, California.
[7]  Denham, H., Anderson, T., Madenci, E., and Calvert, P., 1997, “Embedded PVF2 Sensors for Smart Composites,” Proceedings of SPIE, Vol. 3040, pp. 138-147, 1997.
[8]  Guven, I., Chan, C.-L., and Madenci, E., 1997, “Transient Thermal Analysis of Electronic Packages by Boundary Element Method,” Proceedings, 47th Electronic Components and Technology Conference, San Jose, California, pp. 279-288.
[9]  Madenci, E., Shkarayev, S., and Mahajan, R., 1997, “Potential Failure Sites in a Flip-Chip Package With or Without Underfill,” ASME International Congress and Exposition, Symposium on Application of Fracture Mechanics in Electronic Packaging, Dallas, Texas.
[10]  Guven, I., Madenci, E., and Chan, C.-L., 1998, “Transient Heat Conduction Analysis of Electronic Packages by Coupled Boundary and Finite Element Methods,” Proceedings, 48th Electronic Components and Technology Conference, Seattle, Washington, pp. 51-61.
[11]  Razi, H., Sergeev B., Shkarayev, S., and Madenci, E., 1998, “Analysis of Sandwich Panels with Multiple-Site Damage,” Proceedings, Fourth International Conference on Sandwich Construction, Stockholm Sweden, EMAS Publishing, West Midlands, UK, pp. 213-216.
[12]  Anderson, T., Madenci, E., and Fish, J. C., 1998, “An Analytical and Experimental Investigation of Sandwich Composites Subjected to Low-Velocity Impact,” Proceedings, Fourth International Conference on Sandwich Construction, Stockholm Sweden, EMAS Publishing, West Midlands, UK, pp. 731-744.
[13]  Barut, A., Madenci, E., and Tessler, A., 1998, “Analysis of Composite Sandwich Panels via a Triangular Shell Element Based on Higher-Order Theory,” Proceedings, Fourth International Conference on Sandwich Construction, Stockholm Sweden, EMAS Publishing, West Midlands, UK, pp. 263-278.
[14]  Sergeev, B., Madenci, E., and Ambur, D. R., 1998, “Influence of Bolt Spacing and Degree of Laminate Anisotropy in Single-Lap Joints,” NATO-ASI on Mechanics of Composite Mater. and Struc., Troia, Portugal.
[15]  Madenci, E., Shkarayev, S., Shipilov, Y., and Scotti, S., 1999, “Analysis of Double-Lap Composite Joints with Multiple-Row Bolts Under Combined Mechanical and Thermal Loading,” International Conference on Joining and Repair of Plastics and Composites, The Institution of Mechanical Engineers, London, England, pp. 55-64, 1999.
[16]  Kay, N., Madenci, E., and Shkarayev, S., 1999, “Global/Local Finite Element Analysis for Singular Stress Fields Near the Junction of Dissimilar Elastic and Elastic-Plastic Materials in Electronic Packages,” Proceedings, 49th Electronic Components and Technology Conference, San Diego, California, pp. 987-993.
[17]  Anderson, T., Guven, I., Madenci, E., and Gustafsson, G., 1999, “The Necessity of Reexamining Previous Life Prediction Analyses of Solder Joints in Electronic Packages,” Proceedings, 49th Electronic Components and Technology Conference, San Diego, California, pp. 1010-1014.
[18]  Barut, A., Madenci, E., Heinrich, J, and Tessler, A., 1999, “Analysis of Thick Sandwich Construction by a {3,2}-Order Theory," European Conference on Computational Mechanics, Munich, Germany.
[19]  Anderson, T., Barut, A., Guven, I., and Madenci, E., 2000, “Revisit of Life Prediction Models for Solder Joints,” Proceedings, 50th Electronic Components and Technology Conference, Las Vegas, Nevada, pp. 1064-1069.
[20]  Gustafsson, G., Guven, I., Kradinov, V., and Madenci, E., 2000, “Finite Element Modeling of BGA Packages for Life prediction,” Proceedings, 50th Electronic Components and Technology Conference, Las Vegas, Nevada, pp. 1059-1063.
[21]  Barut, A., Madenci, E., and Tessler, A., 2000, “Complete Stress Field in Thick Sandwich Construction via Single Layer Theory," Proceedings, Fifth International Conference on Sandwich Construction, Zurich, Switzerland, pp. 691-704.
[22]  Barut, A. and Madenci, E., 2001, “A Complex Potential-Variational Formulation for Buckling Analysis of Flat Laminates with Multiple Cutouts,” 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, Washington, Paper No. 2001-1547.
[23]  Kradinov, V., Barut, A., Madenci, E., and Ambur, D. R., 2001, “Optimum Design for Double-Lap Bolted Composite Joints Using a Genetic Algorithm,” 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, Washington, Paper No. 2001-1490.
[24]  Anderson, T. and Madenci, E., 2001, “Simplified Dynamic Low-Velocity Impact Models for Sandwich Composites Based on Complete Quasi-Static Analyses,” 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, Washington, Paper No. 2001-1543.
[25]  Guven, I., Barut, A., and Madenci, E., 2001, “Sensitivity Derivatives in Dissimilar Material Junctions in Electronic Packages,” Proceedings, 51st Electronic Components and Technology Conference, Orlando, Florida, pp. 911-918.
[26]  Anderson, T., Hanauska, J. and Madenci, E., 2001, “Embedded PVF2 Sensors for Impact and Damage Detection in Sandwich Composites,” Proceedings, 33rd International SAMPE Technical Conference, Seattle, Washington, pp. 129-139.
[27]  Barut, A., and Madenci, E., 2002, “The Influence of Uncertainties on the Buckling Response of Thin Curved Composite Panels with Multiple Cutouts,” 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, Paper No. 2002-1515.
[28]  Kradinov, V., Madenci, E. and Ambur, D. R., 2003, “Analysis of Bolted Laminates of Varying Thickness and Lay-Up with Metalic Inserts ,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2002-1998.
[29]  Das, M., Barut, A., Madenci, E. and Ambur, D. R., 2003, “Nonlinear Analysis of a Tapered Patch Bonded over a Cutout in a Skin,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2003-1999.
[30]  Madenci, E. and Barut, A., 2003, “Influence of an Elliptical Cutout on Buckling Response of Composite Cylindrical Shells with Non-uniform Wall-Thickness and Non-Circular Cross-Section,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2003-1929.
[31]  Guven, I. and Madenci, E., 2003, “Singular Stress Field for an Elliptical Surface Crack Perpendicular to the Interface of Dissimilar Materials by Boundary Element Method,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2003-1993.
[32]  Das, M., Barut, A., Madenci, E. and Ambur, D. R., 2003, “A Triangular Sandwich Element for Complete Stress Field Based on a Single-Layer Theory," Proceedings, Sixth International Conference on Sandwich Construction, Boca Raton, Florida, pp. 879-894..
[33]  Kilic, B., Madenci, E. and Ambur, D. R., 2003, “Three-Dimensional Analytical Solution of Functionally Gradient Core Sandwich Panels with a Circular Hole," Proceedings, Sixth International Conference on Sandwich Construction, Boca Raton, Florida, pp. 260-269.
[34]  Guven, I., Kradinov, V., Madenci, E., and Tor, J., 2003, "Solder Joint Life Prediction Model Based on the Strain Energy Density Criterion," Proceedings of the 53rd Electronic Components & Technology Conference, New Orleans, LA, pp.214-220.
[35]  Kilic, B., Madenci, E. and Ambur, D. R., 2004, “Global-Local Finite Element Analysis of Bonded Single-Lap Joints,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1559.
[36]  Kradinov, V., Madenci, E. and Ambur, D. R., 2004, “Combined in-plane and through-the thickness analysis for failure prediction of bolted composite joints,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1703.
[37]  Oterkus, E., Barut, A., Madenci, E., Smeltzer III, S.S. and Ambur, D. R., 2004, “Nonlinear analysis of bonded composite single-lap joints,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1560.
[38]  Das, M., Barut, A., Madenci, E. and Ambur, D. R., 2004, “Thermo-elastic triangular sandwich element for the complete stress field based on a single-layer theory ,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1770.
[39]  Oterkus, E., Barut, A. and Madenci, E., 2004, “Buckling of composite plates with a reinforced circular cutout subjected to uniform and non-uniform compression ,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1714.
[40]  Das, M., Guven, I. and Madenci, E., 2004, “Three-dimensional analysis of sandwich panels with common defects ,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1840.
[41]  Kay, N. R., Ghosh, S., Guven, I. and Madenci, E., 2004, “A Combined Experimental and Analytical Approach for Interface Fracture Parameters between Dissimilar Materials in Electronic Packages,” TMS Annual Meeting, Charlotte, NC, March 14-18.
[42]  Kirk, J. J., Tor, J. L., Guven, I., Madenci, E., Mertol, A. and Kutlu, Z., 2004, "Experimental Validation of Hygro/Thermo-Mechanical Simulations for Multi-Material Polymer Structures," Proceedings of the 54th Electronic Components & Technology Conference, Las Vegas, NV.
[43]  Avila, A. F. and Madenci, E., 2004, “An Experimental Investigation of Negative Through-the-Thickness Poisson’s Ratio on Patch Repairs,” ASC/ASTM-D30 Joint 19th Annual Technical Conference, Atlanta, GA, October 17-20.
[44]  Kilic, B. and Madenci, E., 2005, “Analysis of Blister Tests by Using Hypersingular Integral Equations,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-2323.
[45]  Oterkus, E., Madenci, E., Smeltzer III, S.S. and Ambur, D. R., 2005, “Nonlinear Analysis of Bonded Composite Tubular Lap Joints,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-2380.
[46]  Barut, A., Guven, I., Madenci, E. and Ambur, D. R., 2005, “A Meshless Grain Element for Micromechanical Analysis,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-1910.
[47]  Oterkus, E., Madenci, E., and Nemeth, M. P., 2005, “Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-1824.
[48]  Das, M., Guven, I. and Madenci, E., 2005, "Simulation of Functionally Graded Underfill Layers Using the Boundary Element Method," Proceedings of the 55th Electronic Components & Technology Conference, Lake Buena Vista, FL.
[49]  Das, M., Madenci, E. and Razi, H., 2005, “Repair Classification for Sandwich Panels with Hail Damage," Proceedings, Seventh International Conference on Sandwich Structure, Aalborg, Denmark, pp. 497-506.
[50]  Barut, A. and Madenci, E., 2006, “Buckling Analysis of Laminates with a Cutout through Zeroth-Order Shear Deformation Theory,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1785.
[51]  Barut, A. and Madenci, E., 2006, “A Semi-Analytical Approach for Predicting the Post-Buckling Response of Composite Plates with a Cutout,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1786.
[52]  Barut, A., Das, M. and Madenci, E., 2006, “Nonlinear Deformations of Flapping Wings on a Micro Air Vehicle,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1662.
[53]  Oterkus, E, A., Madenci, E. and Ambur, D. R., 2006, “Validated Analysis Method for Bolted Composite Lap Joints,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-2270.
[54]  Oterkus, E., Madenci, E., Smeltzer III, S.S. and Ambur, D. R., 2006, “Thermo-Mechanical Analysis of Bonded Cylindrically Curved Composite Shell Structures,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1963.
[55]  Das. M., Barut, A., Madenci, E., and Straub, F. K., 2006, “Nonlinear Flexible Multibody Dynamic Analysis of Rotor Blades with a Trailing Edge Flap,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1862.
[56]  Kilic, B. , Madenci, E. and Ambur, D. R., 2006, “Analysis of Brazed Single-Lap Joints by Peridynamics Theory,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-2267.
[57]  Celik, E., Guven, I. and Madenci, E., 2006, “Transient Response of Composite Sandwich Panels Subjected to Blast Wave Pressure,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-2008.
[58]  B Kilic and E. Madenci, “Peridynamic Theory to Predict Strain Field in Bonded Dissimilar Material Layers Due to Thermal Loading,” International Congress on Thermal Stresses, Taipei, Taiwan, June 4-7, 2007.
[59]  E. Celik, I. Guven, and E. Madenci, “Non-Fickian Moisture Diffusion in Electronic Packages: Experimental and Computational Aspects,” TECHCON 2007, Austin, Texas, September 10-12, 2007.
[60]  Colavito, K. W., Kilic, B., Celik, E., Madenci, E., Askari, E. and Silling, S., 2007, “Effect of Void Content on Stiffness and Strength of Composites by a Peridynamic Analysis and Static Indentation Test,” ,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2251.
[61]  Colavito, K. W., Kilic, B., Celik, E., Madenci, E., Askari, E. and Silling, S., 2007, “Effect of Nano Particles on Stiffness and Impact Strength of Composites ,” ,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2021.
[62]  Oterkus, E., Barut, A., Madenci, E. and Ambur, D. R., 2007, “Analysis of Bolted-Bonded Composite Lap Joints,” ,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2187.
[63]  Das, M., Madenci, E. and Straub, F., 2007, “Aeroelastic Analysis of Rotor Blades Using Three Dimensional Flexible Multibody Dynamic Analysis,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2295.
[64]  Agwai, A., Guven, I., Madenci, E. and Kepler, J., 2007, “A Combined Experimental and Numerical Analysis of Sandwich Panels Subjected to Ballistic Loads,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-1998.
[65]  Turkmen, H. S., Dogan, V. Z., Madenci, E. and Tessler, A., 2007, “Vibration of Sandwich Panels Using {3,2}-Order Plate Theory,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2382.
[66]  Celik, E., Guven, I., and Madenci, E., 2007, "Experimental and Numerical Characterization of Non-Fickian Moisture Diffusion in Electronic Packages ," Proceedings of the 57th Electronic Components & Technology Conference, Reno, NV.
[67]  Agwai, A., Guven, I., and Madenci, E., 2008, "Peridynamic Theory for Impact Damage Prediction and Propagation in Electronic Pckages due to Drop," Proceedings of the 58th Electronic Components & Technology Conference, Lake Buena Vista, FL.
[68]  Agwai, A., Guven, I., and Madenci, E., 2008, "Peridynamic Teory for Failure Prediction in Multilayer Thin-Film Structures of Electronic Packages," Proceedings of the 58th Electronic Components & Technology Conference, Lake Buena Vista, FL. Best student paper award.
[69]  Kilic, B., Agwai, A., and Madenci, E., 2008, “Damage Prediction in Notched Composites Using the Peridynamic Theory,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-2000.
[70]  Barut, A., Das, M., Madenci, E., and Tessler, A., 2008, “A Geometrically Nonlinear Shell Element Based on Higher-Order Theory for Sandwich Panels,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-2254.
[71]  Barut, A., and Madenci, E., 2008, “Postbuckling of Composite Panels with Isogrid Stiffeners,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-2274.
[72]  Colavito, K.W., Das, M., Hahs, D., Gorman, J., Madenci, E., and Smeltzer III, S.S., 2008, “Digital Image Correlation for Adhesive Strains in Bonded Composite Lap Joints,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-1844.
[73]  Colavito, K.W., Madenci, E., and Smeltzer III, S.S., 2009, “Refinements in Digital Image Correlation Technique to Extract Adhesive Strains Lap Joints,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2504.
[74]  Barut, A. and Madenci, E., 2009, “Progressive Damage in Composite Laminates Using a Higher Order Element,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2548.
[75]  Kilic, B. and Madenci, E., 2009, “Coupling of Peridynamic Theory and Finite Element Method,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2395.
[76]  Das, M., Barut, A., Madenci, E. and Tessler, A., 2009, “Folded Plate Structures Undergoing Large Membrane and Transverse Bending Deformations,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2344.
[77]  Das, M., Barut, A. and Madenci, E., 2009, “A Refined and Efficient Approach for Dynamic Analysis of Helicopter Blades,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2603.
[78]  Agwai, A., Guven, I., and Madenci, E., 2009, " Damage Prediction for Electronic Package Drop Test using Finite Element Method and Peridynamic Theory," Proceedings of the 59th Electronic Components & Technology Conference, San Diego, CA.
[79]  Celik, E., Oterkus, E., Guven, I., and Madenci, E., 2009, " Mechanical Characterization of Ultra-thin Films by Combining AFM Nanoindentation Tests and Peridynamic Simulations," Proceedings of the 59th Electronic Components & Technology Conference, San Diego, CA.
[80]  Oterkus, E, Agwai, A., Guven, I. and Madenci, E., 2009, “Peridynamic Theory for Simulation of Failure Mechanisms in Electronic Packages” Proceedings of InterPACK'09, San Francisco, CA, Paper No. IPACK2009-89107.
[81]  Madenci, E., Guven, I. and Oterkus, E., 2009, “Residual Strength Prediction for Concrete Structures after Penetration” 80th Shock and Vibration Symposium, San Diego, CA.
[82]  Madenci, E., Guven, I. and Agwai, A., 2009, “Penetration Simulation of Layered Panels using Peridynamic Theory” 80th Shock and Vibration Symposium, San Diego, CA.
[83]  Agwai, A., Guven, I. and Madenci, E., 2010, “Predicting Crack Initiation and Propagation using XFEM, CZM and Peridynamics: A Comparative Study” Proceedings of the 60th Electronic Components & Technology Conference, Las Vegas, NV.
[84]  Oterkus, E, Guven, I. and Madenci, E., 2010, “Fatigue Failure Model with Peridynamic Theory” Proceedings of ITherm 2010, Las Vegas, NV.
[85]  Agwai, A., Guven, I. and Madenci, E., 2010, “Comparison of XFEM, CZM and PD for Predicting Crack Initiation and Propagation” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2539. – Best student paper award.
[86]  Alpay, S., Barut, A., Madenci, E. and Tessler, A., 2010, “A Robust Three-node Shell Element Using Consistent In-plane and Transverse Bending Kinematics for Analysis of Stiffened-Shell Structures” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2929.
[87]  Alpay, S., Barut, A. and Madenci, E., 2010, “An efficient modeling approach for dynamic simulation of wind turbine blades” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2739.
[88]  Colavito, K. W. and Madenci, E., 2010, “Adhesive failure in hybrid double cantilever beams by digital image correlation” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2603.
[89]  Oterkus, E., Barut, A. and Madenci, E., 2010, “Damage Growth Prediction from Loaded Composite Fastener Holes by Using Peridynamic Theory” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-3026.
[90]  Oterkus, E., Guven, I. and Madenci, E., 2010, “Effect of Core Termination Features on Failure Modes in Sandwich Panels by Using Peridynamic Theory” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2691.
[91]  Vallone, W., Guven, I. and Madenci, E., 2010, “Wind Tunnel Tests to Modify a Drag-type Vertical Axis Wind Turbine” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2653.
[92]  Celik, E. and Madenci, E., 2010, “Mechanical Characterization of Metallic Nanowires by Combining Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM)” Nanotech Conference and Expo 2010, Anaheim, CA.
[93]  Celik, E., Guven, I., and Madenci, E., 2010, “Mechanical Characterization of Nanowires Using a Customized Atomic Force Microscope,” SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Indianapolis, IN.
[94]  Agwai, A., Guven, I., and Madenci, E., 2011, “A New Thermomechanical Fracture Analysis Approach for 3D Integration Technology,” Proceedings of the 61st Electronic Components & Technology Conference, Orlando, Florida.
[95]  Celik, E., Guven, I., and Madenci, E., 2011, “Mechanical Characterization of Nanowires Using a Customized Atomic Force Microscope in Scanning Electron Microscope,” Proceedings of the 61st Electronic Components & Technology Conference, Orlando, Florida.
[96]  Oterkus, E., and Madenci, E., 2011, “Damage Prediction in Graphene Thermoplastics for Potential Electronic Packaging Applications,” Proceedings of the 61st Electronic Components & Technology Conference, Orlando, Florida.
[97]  Barut, A., Guven, I. and E. Madenci, 2011, “An Analytical Method for Evaluating Bolted Joint Repairs in Composite Structures,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, Paper No. AIAA-2011-1733.
[98]  Barut, A., and E. Madenci, 2011, “An Analytical Method for Evaluating Repairs of in Composite Honeycomb Structures,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, Paper No. AIAA-2011-1789.
[99]  Leow, Y. K., Akoglu, A., Guven, I. and Madenci, E., 2011, “High performance linear equation solver using NVIDIA GPUs,” 2011 NASA/ESA Conference on Adaptive Hardware and Systems (AHS), San Diego, California.
[100]  Oterkus, E., and Madenci, E., 2011, “Structural Stability and Failure of Composite Laminates Using Peridynamic Theory,” 16th International Conference on Composite Structures ICCS 16 A. J. M. Ferreira (Editor), FEUP, Porto, Portugal.
[101]  Agwai, A. and Madenci, E., 2011, “Peridynamic Approach for Heat Conduction,” ICIAM 2011 -- 7th International Congress on Industrial and Applied Mathematics, Vancouver, BC, Canada
[102]  Oterkus, E. and E. Madenci, 2011, “An Alternative Derivation of Ordinary State-Based Formulation of Peridynamic Theory, ” 11th U.S. National Congress on Computational Mechanics, Minneapolis, Minnesota.
[103]  Oterkus, E. and E. Madenci, 2011, “Peridynamic Theory for Damage Initiation and Growth in Composite Laminates,” 101th International Conference on Fracture and Damage Mechanics, Dubrovnik, Croatia.
[104]  Oterkus, E. and E. Madenci, 2011, “Peridynamic Analysis for Predicting Damage Initiation and Growth in Metallic and Composite Structures,” MecSol 2011, III International Symposium on Solid Mechanics, Florianópolis, Brazil.
[105]  Miller, I, Madenci, E. and Choi, S., 2011, “Foreign Object Damage Prediction in Ceramic Matrix Composites,” 35th Annual Conference on Composites, Materials and Structures, Cocoa Beach, Florida.
[106]  Agwai, A., Guven, I. and Madenci, E., 2012, “Fully Coupled Peridynamic Thermomechanics, “ 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Honolulu, Hawaii, Paper No. AIAA-2012-1963
[107]  Oterkus, E. and Madenci, E., 2012, “Ordinary State-Based Peridynamic Material Constants, “ 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Honolulu, Hawaii, Paper No. AIAA-2012-1946
[108]  Oterkus, E. and Madenci, E., 2012, “Peridynamics for Failure Prediction in Composites, “ 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Honolulu, Hawaii, Paper No. AIAA-2012-1692
[109]  Oterkus, E., Barut, A. and Madenci, E., 2012, “Peridynamics Based on the Principle of Virtual Work, “ 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Honolulu, Hawaii, Paper No. AIAA-2012-1540
[110]  Colavito, K., Guven, I. and Madenci, E., 2012, “Fracture Behavior of Nanostructured Materials through Peridynamic Theory, “ 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Honolulu, Hawaii, Paper No. AIAA-2012-1542
[111]  Barut, A., Madenci, E. and Tessler, A., 2012, “A Refined Zigzag Theory for Laminated Composite and Sandwich Plates Incorporating Thickness Stretch Deformation” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Honolulu, Hawaii, Paper No. AIAA-2012-1705
[112]  Agwai, A. Guven, I., and Madenci, E., 2012, “Failure Prediction in Fully Coupled Thermal and Deformational Fields with Peridynamic” Proceedings of the 62st Electronic Components & Technology Conference, San Diego, CA.
[113]  Guven, E., Madenci, E., Erdman, R., and Zelisnski, B., 2012, “Modeling of Impact Damage in EM Windows and Domes with Peridynamic Theory,” 14th Electromagnetic Windows Symposium.San Antonio, TX
[114]  Oterkus, E., Colavito, K., Madenci, E., and Comlekci,T., 2012, Fatigue Failure model by Using Ordinary-State Based Peridynamic Theory, The 10th World Congress on Computational Mechanics (WCCM 2012), São Paulo, Brazil.

Publications: Books/Book Chapters

[1]  Madenci, E., Guven, I. and Kilic, B., 2002, Fatigue Life Prediction of Solder Joints in Electronic Packages with ANSYS, Kluwer Academic Publishers, Boston, MA.
[2]  Madenci, E. and Guven, I., 2005, The Finite Element Method and Applications in Engineering Using ANSYS, Springer, Boston, MA.
[3]  Madenci, E., Barut, A. and Guven, I., 2011, “Stress analysis of composite joints under multiaxial loading,” Composite joints and connections: Principles, modeling and testing, Edited by P. Camanho and L. Tong, Woodhead Publishing, Cambridge, UK.
[4]  Madenci, E., Barut, A. and Guven, I., 2011, “Stress analysis of bonded patch and scarf repairs in composite structures,” Composite joints and connections: Principles, modelling and testing, Edited by P. Camanho and L. Tong, Woodhead Publishing, Cambridge, UK.
[5]  Lamson, M, Cangellaris, A. and Madenci, 2007, “Integrated Circuit Packaging,” Handbook of Semiconductor Manufacturing Technology, Edited by R. Doering and Y. Nishi, CRC press, Boca Raton, FL.