International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

Changduk Kong

Editorial Board Member of International Journal of Composite Materials

Professor, Department of Aerospace Engineering, Chosun University, South Korea

Research Areas

Aircraft Gas turbine Technology ( Gas Turbine Simulation, Control and Health Monitoring), Aerospace Structure (Composite Materials Structure Design), Wind Turbine (Composite Materials Structure Design)

Education

1970 - 1974B.S. in Aeronautical EngineeringKorea Aerospace University
1980 - 1982M.S. in Mechanical EngineeringDankook University
1983 - 1988Ph.D. in Mechanical Engineering (Gas turbine)Dankook University
1999 - 2001Ph.D. in Aerospace Engineering (Structure)Osaka Prefecture University (Japan)

Experience

1978 - 1994Head of Aero-propulsion Division, Principal Researcher, A/C R&D Center, Agency for Defense Development, R.O.K.
1978 - 1994Project Manager in KT-1(Korean Military Basic Trainer Program) Propulsion System Integration and KTX-2 (Advanced Korean Military Trainer) Conceptual Design; Project Manager of Small Gas Turbine Development Programs; Researcher of Solid Rocket Motor Develo
1994 - PresentProfessor, Ex-Head & Ex-Dean, Dept. of Aerospace Engineering, School of Aerospace, Naval Architecture and Ocean Engineering, Chosun University; Chair of Cycle Innovation Committee, IGTI-ASME; Sub-project managers of KUH, Smart UAV, KPP A/C, MUAV, etc. R&D
2004 - 2006President of Research Institute of Mechanical Technology, Chosun University
2011 - 2013Dean, Facility Management Office, Chosun University

Academic Achievement

Minister Award of Ministry of Education, 1974
President Awards of Agency for Defense Development, 1976, 1982
Defense Science Medals, 1989, 1991, 1992
President Award of Chosun University, 1999
Minister Award of Ministry of Commerce, Industry and Energy, 2004
Academic Achievement Award of Korean Society of Propulsion Engineers, 2006
Academic Achievement Award of Korean Society for Aeronautical and Space Sciences, 2006
Who’s Who in the World, published in USA, 2002-2012
Who’s Who in Science and Engineering published in USA, 2002-2012
Minister Award of Ministry of Knowledge Economy, 2008

Membership

Former President of Korean Society for Aeronautical and Space Sciences
Former President of Korean Society of Propulsion Engineers
Vice President of Society of Aerospace System Engineering
Director of The Korean Society for Composite Materials
Director of Korea Aeronautical Engineer's Association
Member of American Society of Mechanical Engineers
Member of Japan Society of Mechanical Engineers

Publications: Journals

[1]  C.D. Kong, P.K. Datta, Sauvik Biswas, “Buckling, vibration and flutter behavior of laminated composite panels with flaws subjected to non-uniform follower forces”, JOURNAL OF ENGINEERING MECHANICS-ASCE, C.D. Kong, P.K. Datta, Sauvik Biswas, 138/347~357, 2012-04-01.
[2]  C.D. Kong, H.B. Park, K.S. Lee, “Investigation on Damage Tolerance of Carbon/epoxy Laminate for Aircraft Structural Design”, Key Engineering Materials, C.D. Kong, H.B. Park, K.S. Lee, 488/460~463, 2012-01-01.
[3]  C.D. Kong, S.M. Lee, “Study on Fault Diagnostics of a Turboprop Engine Using Inverse Performance Model and Artificial Intelligent Method”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong, S.M. Lee, 28/255~264, 2011-12-13.
[4]  C.D. Kong, K.W. Kim, “Development of GUI Type On-Line Condition Monitoring Program for a Turboprop Engine Using Labview”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong, K.W. Kim, 28/265~272, 2011-12-01.
[5]  C.D. Kong, P. K. Datta, S. Biswas, “Static and dynamic instability characteristics of curved laminates with internal damage subjected to follower loading”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, C.D. Kong, P. K. Datta, S. Biswas, 225/1~12, 2011-05-17.
[6]  H.B. Park, C.D Kong, “A study on low velocity impact damage evaluation and repair technique of small aircraft composite structure”, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, H.B. Park, C.D Kong, 42/1~10, 2011-05-07.
[7]  C.D. Kong , Y.J Goo, “GUI Type Fault Diagnostic Program for a Turboshaft Engine Using Fuzzy and Neural Networks”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong , Y.J Goo, 28/31~39, 2011-04-11.
[8]  C.D. Kong, H.B. Park, S.H Choi, “Investigation on Design for a 500 W Wind Turbine Composite Blade Considering Impact Damage”, ADVANCED COMPOSITE MATERIALS, C.D. Kong, H.B. Park, S.H Choi, 20/105~123, 2011-03-01.
[9]  C.D. Kong, S.M. Lim, “Inverse Generation of Gas Turbine Component Performance Maps from Experimental Test Data”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong, S.M. Lim, 27/135~148, 2010-12-01.
[10]  C.D. Kong, “Development of On-line Performance Diagnostic Program of a Helicopter”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong, 27/79~97, 2010-10-01.
[11]  C.D. Kong, H.B. Park, M.W. Kim, “Study on Damage Evaluation of Composite Structure after Impact Damage and Quasi-Static Indentation Damage”, Journal of Materials Science and Engineering, C.D. Kong, H.B. Park, M.W. Kim, 4/83~87, 2010-09-01.
[12]  C.D. Kong, H.B. Park, H.S. Lee, “Study on comparison of atmospheric and vacuum environment of thermally-induced vibration using vacuum chamber”, Int'l J. of Aeronautical & Space Sciences, C.D. Kong, H.B. Park, H.S. Lee, 11/26~30, 2010-03-01.
[13]  C.D. Kong, “Engine Trend Monitoring of a Long Endurance UAV Using Linear Regression and Fuzzy Logic”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong, 26/187~200, 2009-12-01.
[14]  C.D. Kong, S.H. Kho, Y.J. Goo, H. Ryu, “Development of On-line Perfor4mance Diagnostic Program of a Helicopter Turboshaft Engine”, International Journal of Aeronautical and Space Sciences, C.D. Kong, S.H. Kho, Y.J. Goo, H. Ryu, 10/34~42, 2009-11-01.
[15]  C.D. Kong, J.Y. Ki, “Steady-State and Transient Performance Modeling of Smart UAV Propulsion System Using SIMULINK”, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, C.D. Kong, J.Y. Ki, 131/1~8, 2009-05-01.
[16]  C.D. Kong, H.B. Park, G.J. Kang, “A Study on Conceptual Structural Design of Wing for a Small Scale WIG Craft Using Carbon/Epoxy and Foam Sandwich Composite”, ADVANCED COMPOSITE MATERIALS, C.D. Kong, H.B. Park, G.J. Kang, 17/373~358, 2008-12-01.
[17]  C.D. Kong, J.Y. Ki, S.H. Oh, J.H. Kim, “Trend Monitoring of A Turbofan Engine for A Long Endurance UAV Using Fuzzy Logic”, KSAS International Journal, C.D. Kong, J.Y. Ki, S.H. Oh, J.H. Kim, 9/63~69, 2008-11-01.
[18]  C.D. Kong, H.B. Park, J.I. Kim, “Preliminary Design for the Fuselage of a Small Scale WIG Craft Using Composite Materials”, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, C.D. Kong, H.B. Park, J.I. Kim, 15/189~206, 2008-09-30.
[19]  C.D. Kong, H.B. Park, J.I. Kim, “A Study on Fault Detection of a Turboshaft Engine Using Neural Network Method”, KSAS International Journal, C.D. Kong, H.B. Park, J.I. Kim, 15/189~206, 2008-05-01.
[20]  C.D. Kong, J.Y. Ki, “Study on Component Map Identification from Gas Turbine Performance Deck Data Using Hybrid Method”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong, J.Y. Ki, 24/171~182, 2007-12-01.
[21]  C.D. Kong, J.Y. Ki, S.H. Kho, C.H. Lee, “Artificial Intelligent Fault Detection of A Turboshaft Engine for Smart UAV Using SIMULINK Performance Model”, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, C.D. Kong, J.Y. Ki, S.H. Kho, C.H. Lee, 24/161~170, 2001-12-01.
[22]  J.H. Lee, Costas Soutis, C.D. Kong, “Static Compressive Strength of Unidirectional Carbon Fiber-Epoxy Laminate”, KEY ENGINEERING MATERIALS, J.H. Lee, Costas Soutis, C.D. Kong, 334/357-360, 2007-05-01.
[23]  C.D. Kong, H.B. Park, J.H. Yoon, K.J. Kang, “Conceptual Design on Carbon-Epoxy Composite Wing of A Small Scale Wig Vehicle”, KEY ENGINEERING MATERIALS, C.D. Kong, H.B. Park, J.H. Yoon, K.J. Kang, 334/353~356, 2007-05-01.
[24]  C.D. Kong, J.Y. Ki, “Component Map Generation of Gas Turbine Engine Using Genetic Algorithms and Engine Performance Deck Data”, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, C.D. Kong, J.Y. Ki, 129/321~317, 2007-04-01.
[25]  C.D. Kong, T.K. Kim, D.J. Han, Yoshihiko Sugiyama, “Investigation of fatigue life for a medium scale composite wind turbine blade”, INTERNATIONAL JOURNAL OF FATIGUE, C.D. Kong, T.K. Kim, D.J. Han, Yoshihiko Sugiyama, 28/1382~1388, 2006-10-01.
[26]  C.D. Kong, J.H. Park, M.C. Kang, “A Study on Transient Performance Characteristics of the Canard Rotor Wing Type Unmanned Aerial Vehicle Propulsion System During Flight Mode Transition”, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, C.D. Kong, J.H. Park, M.C. Kang, 128/573~578, 2006-07-01.
[27]  C.D. Kong, C.H. Lee, D.J. Han, “Fuel system design of the smart UAV considering operational reliability”, AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, C.D. Kong, C.H. Lee, D.J. Han, 78/204~210, 2006-06-01.
[28]  C.D. Kong, J. Bang, “Aerodynamic and Structural Design of Glass/Epoxy Skin-Urethane Foam Sandwich Composite Blade for 1kW Class Wind Turbine”, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, C.D. Kong, J. Bang, 13/21~30, 2006-01-31.
[29]  C.D. Kong, S.H. Kho, J.Y. Ki, “Component Map Generation of a Gas Turbine Using Genetic Algorithms”, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, C.D. Kong, S.H. Kho, J.Y. Ki, 128/92~96, 2006-01-01.
[30]  C.D. Kong, J.H. Lee, Costas Soutis, “Modeling of low velocity impact damage in laminated composites”, Journal of Mechanical Science and technology, C.D. Kong, J.H. Lee, Costas Soutis, 19/974~957, 2005-04-30.
[31]  C.D. Kong, S.H. Kho, J.Y. Ki, “Improvement on Performance Simulation of Gas Turbine Using Component Maps Obtained from System Identification”, Intl. J. Turbo & Jet-Engines, C.D. Kong, S.H. Kho, J.Y. Ki, 21/279~287, 2004-12-01.
[32]  C.D. Kong, J.Y. Ki, M.C. Kang, “Fuzzy Approaches for Searching Optimal Component Matching Point in Gas Turbine Performance Simulation”, Journal of Engineering for Gas Turbines and Power-Trans. of ASME, C.D. Kong, J.Y. Ki, M.C. Kang, 126/741~747, 2004-10-31.
[33]  C.D. Kong, J.Y. Ki, M.C. Kang, S.H. Kho, “Intelligent performance diagnostics of a gas turbine engine using user-friendly interface neural networks”, Aircraft Engineering and Aerospace Technology-An Intl. J., C.D. Kong, J.Y. Ki, M.C. Kang, S.H. Kho, 76/391~397, 2004-07-01.
[34]  C.D, Kong, M.C. Kang, J.Y. Ki, “Steady-State Performance Simulation and Engine Condition Monitoring for 2-Spool Separate Flow Type Turbofan Engine”, Intl. J. of Turbo & Jet-Engines, C.D, Kong, M.C. Kang, J.Y. Ki, 20/289~296, 2003-12-01.
[35]  C.D. Kong, J.Y. Ki, M.C. Kang, “A new scaling method for component maps of gas turbine using system identification”, JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, C.D. Kong, J.Y. Ki, M.C. Kang, 125/979~985, 2003-11-22.
[36]  C.D. Kong, J.Y. Ki, T.H. Kim, “Optimal measurement parameter selection of turboprop engine using GPA approach”, International J. Of Turbo& Jet-Engines, C.D. Kong, J.Y. Ki, T.H. Kim, 20/171~182, 2003-06-30.
[37]  C.D. Kong, H.S. Roh, “Steady-state performance simulation of PT6A-62 turboprop engine using SIMULINK”, International J. Of Turbo& Jet-Engines, C.D. Kong, H.S. Roh, 20/183~194, 2003-06-30.
[38]  C.D. Kong, Y. Sugiyama, J. Lee, C.Soutis, “Full scale structural experimental investigation of an composite wind turbine blade”, Advanced Composites Letters, C.D. Kong, Y. Sugiyama, J. Lee, C.Soutis, 11/207~219, 2002-11-15.
[39]  C. Soutis, J. Lee, C.D. Kong, “Size effect on compressive strength of T300/924C carbon fiber-epoxy laminates”, Plastics, Rubber and Composites, C. Soutis, J. Lee, C.D. Kong, 31/364~370, 2002-10-01.
[40]  C.D. Kong, J. Jeong, W. Yo, Y. Sugiyama, C. Soutis, “Investigation of Vibration Characteristics of Carbon/Epoxy Propeller Shaft for Vehicle”, Science and Engineering of Composite Materials, C.D. Kong, J. Jeong, W. Yo, Y. Sugiyama, C. Soutis, 10/11~18, 2002-07-01.
[41]  C.D. Kong, Y. Sugiyama, C. Soutis, “Structural Design and Experimental Investigation of a Medium Scale Composite Wind Turbine Blade Considering Fatigue Life”, Science and Engineering of Composite Materials, C.D. Kong, Y. Sugiyama, C. Soutis, 10/1~9, 2002-07-01.
[42]  C.D. Kong, J. Jeong, W. Yo, Y. Sugiyama, C. Soutis, “Vibration characteristics of carbon/epoxy propeller shaft for vehicle”, Journal of Iron and Steel Research International, C.D. Kong, J. Jeong, W. Yo, Y. Sugiyama, C. Soutis, Special Issue/237~243, 2002-06-01.
[43]  C.D. Kong, Y. Sugiyama, J.Lee, C. Soutis, “Full scale structural experimental investigation of medium scale E-glass/epoxy composite wind turbine blade”, Journal of Iron and Steel research International, C.D. Kong, Y. Sugiyama, J.Lee, C. Soutis, Special Issue/230~236, 2002-06-01.
[44]  C.D. Kong, N.UDA, “Generalized theoretical analysis method for free-edge delaminations in composite laminates”, Journal of Materials Science, C.D. Kong, N.UDA, 37/1875~1880, 2002-05-01.
[45]  C.D. Kong, J.Y. Ki, S.J. Jeong, “Performance Simulation of a Turboprop Engine for Basic Trainer”, KSME International Journal, C.D. Kong, J.Y. Ki, S.J. Jeong, 16/839~850, 2002-05-01.
[46]  C.D. Kong, “A study on straight flow annular combustor for small scale turbojet engine”, Int. J. of Turbo and Jet-Engines, C.D. Kong, 18/157~167, 2001-09-30.
[47]  C.D. Kong, S.J. Jeong, J.Y. Ki, “Performance Analysis, Real Time Simulation and Control of Medium-Scale Commercial Aircraft Turbofan Engine”, KSME International Journal, C.D. Kong, S.J. Jeong, J.Y. Ki, 15/776~787, 2001-06-01.