International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

Bosko Rasuo

Editorial Board Member of International Journal of Composite Materials

Professor, Aeronautical Department, Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia

Research Areas

Composite Materials, Wind Turbine, Aircraft Production Technology, Flight Mechanics, Aerodynamics

Experience

4/2000-presentFull Professor - Department of Aeronautical Engineering, University of Belgrade, Belgrade, Yugoslavia
3/1995-4/2000Associate Professor - Department of Aeronautical Engineering, University of Belgrade, Belgrade, Yugoslavia
12/1989-3/1995Assistant Professor - Department of Aeronautical Engineering, University of Belgrade, Belgrade, Yugoslavia
4/1981-12/1989Teaching Assistant - Department of Aeronautical Engineering, University of Belgrade, Belgrade, Yugoslavia
6/1975-4/1981Graduate Teaching Assistant - Department of Aeronautical Engineering, University of Belgrade, Belgrade, Yugoslavia
9/1973-6/1975Research Assistant - Department of Aeronautical Engineering, University of Belgrade, Belgrade, Yugoslavia

Membership

Member, GAMM - Gesellschaft für Angewandte Mathematik und Mechanik, 1994-present.
Member, AIAA - American Institute of Aeronautics and Astronautics, 11/1990-present.
Member, SAE, Society of Automotive Engineers International, 2001-present.
Member, JSASS - the Japan Society for Aeronautical and Space Science, 2009-present.
Member, RAeS – The Royal Aeronautical Society, 2009-present,
Member, IOM3 - The Institute of Materials, Minerals and Mining, Carlton House Terrace, London SW1, UK, 2006 - present.
Member, ICAS, International Council of the Aeronautical Sciences, present.
Member, IAF, International Astronautically Federation, present.
Member, SSM, Serbian Society of Mechanics, 1975-present.
Member, SAS, Serbian Aerospace Society, 1975-present.

Publications: Journals

[1]  Zivaljevic, M., Rasuo, B., Application of Fuzzy Logic in Solving Problems from the Area of Reliability and Maintenance of Aircraft Systems, Lecture Notes in Computer Science 1226, Springer Verlag, Berlin, 1997,
[2]  Rasuo, B., Verification Testing of Aeronautical Constructions from Composite Laminated Materials in Designing Process, Journal of Aerospace, SAE 1998 Transactions, V-107-1, SAE International, Warrendale, USA, 1999.
[3]  Rasuo, B., Testing of the Survivability of an Aeronautical Constructions from Composite Materials, Journal of Aerospace, SAE 1999 Transactions, V-108-1, SAE International, Warrendale, USA, 2000.
[4]  Rasuo, B., Analytical and Numerical Modelling of the Turn Maneuver of Agricultural Aircraft, Journal of Aerospace, SAE 2001 Transactions, V-110-1, SAE International, Warrendale, USA, 2002.
[5]  Rasuo, B., On Boundary Conditions Modelling of the Fluid-Structure Interaction at Wind Tunnel Testing, PAMM, Vol. 5, Issue 1, WILEY--VCH Verlag GmbH & Co. KGaA, ISSN: 1617-7061, Weinheim, Germany, 2005.
[6]  Rasuo, B., An Experimental Methodology for Evaluating Survivability of an Aeronautical Constructions from Composite Materials: An Overview, International Journal of Crashworthiness, Volume 12, Issue 1, Taylor & Francis, London, UK, 2007.
[7]  Rasuo, B., Some analytical and numerical solutions for the safe turn maneuvers of agricultural aircraft – an overview, The Aeronautical Journal, Volume 111, Number 1123, Paper No. 3147, The Royal Aeronautical Society, London, 2007.
[8]  Siladic, M., Rasuo, B., On-Condition Maintenance for Nonmodular Jet Engines: An Experience, The ASME Journal of Journal of Engineering for Gas Turbines and Power, 131, Issue 3, 032502, New York, NY, May 2009.
[9]  Rasuo, B., Dinulovic, M., Bengin, A., Veg, A., Grbovic, A., Development of the Direct-Drive Wind Turbine Rotor Blades from Composite Materials, World Journal of Engineering, Vol.6, Supplement 2009, Sun Light Publishing Canada, Hebei University of Engineering, Handan, Hebei, China,
[10]  Rasuo, B., Full-Scale Fatigue Testing of the Helicopter Blades from Composite Laminated Materials in the Development Process, Journal of the Mechanical Behavior of Materials, Volume 19, No. 5, 2009, Freund Publishing House Ltd, Tel-Aviv, Israel.
[11]  Rasuo, B., Experimental Study of the Structural Damping of Composite Helicopter Blades with Different Cores, Plastics Rubber & Composites, Volume 39, Number 1, February 2010, Maney Publishing, Institute of Materials, Minerals and Mining, London.
[12]  Bajovic, M., Zivanovic, M., Rasuo, B., Stojakovic , P., A New General Approach to Airplane Rotation, Transactions of the Japan Society for Aeronautical & Space Sciences, The Japan Society for Aeronautical and Space Sciences, Komiyama Printing Co., Ltd, Vol.53, No.180, August 2010.
[13]  Rasuo, B., Dinulovic, M., Dielectric Modeling of E-Glass Epoxy Composite System, World Journal of Engineering, Vol.7, Supplement 2, 2010, Sun Light Publishing Canada, Hebei University of Engineering, Handan, Hebei, China,
[14]  Rasuo, B., Bengin, A., Veg, A., On Aerodynamic Optimization of Wind Farm Layout, PAMM, Vol. 10, Issue 1, WILEY--VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2010.
[15]  Rasuo, B., Experimental Techniques for Evaluation of Fatigue Characteristics of Laminated Constructions from Composite Materials: Full-Scale Testing of the Helicopter Rotor Blades, Journal of Testing and Evaluation (JTE), Volume 39, Issue 2 (March 2011), ASTM International, West Conshohocken, PA, USA.
[16]  Dinulovic, M., Rasuo, B., Dielectric modeling of multiphase composites, Composite Structures, Volume 93, Issue 11 (October 2011), Elsevier Ltd,
[17]  Rasuo, B., Helicopter Tail Rotor Blade from Composite Materials: An Experience, SAE International Journal of Aerospace November 2011 vol. 4 no. 2, SAE International, Warrendale, USA.
[18]  Rasuo, B., Dinulovic, M., Delamination Analysis At Free Edges of Composite Laminates, World Journal of Engineering, Vol.8, Supplement 1, 2011, Sun Light Publishing Canada, Hebei University of Engineering, Handan, Hebei, China.
[19]  Rasuo, B. Gehm, R., Composites give copters a lift: Design, fabrication, and analysis of a tail rotor blade made of composite laminated materials for a heavy transport helicopter, Aerospace Engineering 2012-02-15, SAE International, Warrendale, PA, USA, February 15, 2012.
[20]  Dinulovic, M., Rasuo, B., Modeling of Dielectric Properties of Composite Materials, FME Transactions, Vol. 37 No 3, 2009., Faculty of Mechanical Engineering, University of Belgrade.
[21]  Rasuo, B., Bengin, A., Optimization of Wind Farm Layout, FME Transactions, Vol. 38 No 3, 2010., Faculty of Mechanical Engineering, University of Belgrade, Belgrade.
[22]  Grbovic M. A., Rasuo, B., Vidanovic D. N., Peric M. M., Simulation of Crack Propagation in Titanium Mini Dental Implants (MDI), FME Transactions, Vol. 39 No 4, 2011., Faculty of Mechanical Engineering, University of Belgrade, Belgrade.
[23]  Garinis Dimitrios, Dinulovic Mirko, Rasuo Bosko, Dynamic Analysis of Modified Composite Helicopter Blade, FME Transactions, Vol. 40 No 2, 2012., Faculty of Mechanical Engineering, University of Belgrade, Belgrade.

Publications: Conferences/Workshops/Symposiums

[1]  Dragovic, T., Rasuo, B., Static, Vibratory and Fatigue Test Results for the Helicopter Main Rotor Blade of Composite Laminated Materials, First Australasian Congress on Applied Mechanics, 21-23 February 1996., Melbourne, Australia, Volume 1, Grzebieta, RH (Editor), Barton, ACT, Institution of Engineers Australia.
[2]  Rasuo, B., Results from Testing of the Helicopter Tail Rotor Blade Made of Composite Laminated Materials After Ballistic Damages, Eleventh International Conference on Composite Materials, ICCM-11, 14-18 July 1997, Gold Coast, Queensland, Australia.
[3]  Rasuo, B., Full-Scale Fatigue Testing of the Helicopter Main Rotor Blade Made of Composite Laminated Materials, Fifth International Conference on Composites Engineering, ICCE/5, July 5-11, 1998, Las Vegas, Nevada, USA, David Hui (Ed.).
[4]  Rasuo, B., Verification Testing of Aeronautical Constructions from Composite Laminated Materials in Designing Process, World Aviation Congress ’98, Anaheim, California, USA, September 28-30, 1998.
[5]  Rasuo, B., Vulnerability of an Aeronautical Construction from Composite Laminated Materials Due to Ballistic Damages, Sixth International Conference on Composites Engineering, ICCE/6, June 27-July 3, 1999, Orlando, Florida, USA, David Hui (Ed.).
[6]  Rasuo, B., Investigation of the structural Damping of the Full-Scale Helicopter Main Rotor Blade Made of Composite Laminated Materials, Twelfth International Conference on Composite Materials, ICCM-12, July 5th-9th, 1999, Paris, France, (eds. T. Massard & A. Vautrin), (Woodhead Publishing Limited, Cambridge, England, Proceedings, A4 paperback abstracts volume and CD-ROM, January 2000).
[7]  Rasuo, B., Testing of the Survivability of an Aeronautical Constructions from Composite Materials, 1999 World Aviation Congress, San Francisco, California, USA, October 19-21, 1999.
[8]  Rasuo, B., Full-Scale Fatigue Testing of Helicopter Blades from Composite Laminated Materials, The European Conference on Composite Materials, ECCM-9, 4-7 June 2000, Brighton, UK, IOM Communication Ltd.
[9]  Rasuo, B., An Experimental Study of the Structural Damping of the Full-Scale Helicopter Main Rotor Blade Made of Composite Laminated Materials, Seventh Annual International Conference on Composites Engineering, ICCE/7, July 2-8, 2000, Denver, Colorado, USA, David Hui (Ed.).
[10]  Rasuo, B., Design, Fabrication and Testing of the Helicopter Tail Rotor Blade from Composite Laminated Materials, 13th International Conference on Composite Materials, ICCM-13, June 25-29, 2001, Beijing, China, Yao Zhang (Ed.).
[11]  Rasuo, B., Designing Process of the Helicopter Tail Rotor Blade from Composite Laminated Materials, Eighth International Conference on Composites Engineering, ICCE/8, August 5-11, 2001, Tenerife, Canary Islands, Spain. David Hui (Ed.).
[12]  Rasuo, B., Analytical and Numerical Modelling of the Turn Maneuver of Agricultural Aircraft, Aerospace Congress & Exhibition and 2001 World Aviation Congress, Seattle, Washington, USA, September 10-14, 2001.
[13]  Rasuo, B., A Fatigue Test Method and Facility for Investigation Aeronautical Constructions from Composite Materials, Second International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction, Proceedings of CDCC’2002, B. Benmokrane and E. El-Salakawy Eds., May 29-31, 2002, Montreal, Quebec, Canada.
[14]   Rasuo, B., Experimental Techniques for Verification Survivability of an Aeronautical Constructions from Composite Materials, Ninth International Conference on Composites Engineering, ICCE/9, July 1-6, 2002, San Diego, California, USA.
[15]  Rasuo, B., An Experimental Methodology for Evaluating Survivability of an Aeronautical Constructions from Composite Materials, 23rd Congress of the International Council of the Aeronautical Sciences, ICAS 2002, Toronto, Canada, 8-13 September, 2002.
[16]  Rasuo, B., Experimental Techniques for Verification Structural Characteristics of Laminated Constructions from Composite Materials Full-Scale Testing of the Helicopter Rotor Blades, EUROMECH Colloquium 444, Critical Review of the Theories of Plates and Shells and New Applications, Bremen, Germany, 22-25 September 2002.
[17]  Rasuo, B., Vulnerability of Composite Materials in Survivability or Impact, Tenth International Conference on Composites Engineering, ICCE/10, July 20-26, 2003, New Orleans, Louisiana, USA.
[18]  Rasuo, B., Full-Scale Fatigue Testing of the Helicopter Blades from Composite Laminated Materials in the development process, 5th EUROMECH Solid Mechanics Conference (ESMC), Thessaloniki, Greece, 17-22 August 2003, Editor: E.C. Aifantis.
[19]  Rasuo, B., An Experimental Study of the Structural Damping of the Aeronautical Construction From Composite Laminated Materials, Materials Congress 2004, The Institute of Materials, Minerals and Mining, 30 March – 1 April 2004, 1-6 Carlton House Terrace, London, UK.
[20]  Rasuo, B., Calculation of fluid-solid interaction at transonic wind tunnel testing, International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM'2004), August 22 - 28, 2004, Lufthansa Bildungszentrum Seeheim, Darmstadt, Germany.
[21]  Zivanovic, M., Bajovic, M., Stojakovic , P., Rasuo, B., New General Approach to the Airplane Rotation Analysis, 24th ICAS CONGRESS, August 29 - September 3, 2004, Yokohama, Japan.
[22]  Rasuo, B., Design, Fabrication and Testing of the Wind Turbine Rotor Blades from Composite Laminated Materials, EUROMECH Colloquium 464b: Wind Energy, International Colloquium on Fluid Mechanics & Mechanics of Wind Energy Conversion, October 4 - 7, 2005, Carl von Osietzky University of Oldenburg, Oldenburg, Germany.
[23]  Rasuo, B., Verification testing of the wind turbine rotor blades from composite materials in designing process, Materials Congress 2006, The Institute of Materials, Minerals and Mining, 5 – 7 April 2006, 1-6 Carlton House Terrace, London, UK.
[24]  Rasuo, B., Harmonization of New Wind Turbine Rotor Blades Development, Fourteenth International Conference on COMPOSITES/NANO ENGINEERING (ICCE - 14), July 2-8, 2006, Boulder, Colorado, USA.
[25]  Rasuo, B., An Experimental Study of the Structural Damping of the Full-Scale Helicopter Main Rotor Blade from Composite Laminated Materials, Session 10.7 Structural Response, 25th ICAS CONGRESS, 3 - 8 September, 2006, Hamburg.
[26]  Rasuo, B. and Veg A., Design, Fabrication and Verification Testing of the Wind Turbine Rotor Blades from Composite Materials, 16th International Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8th to 13th, 2007, (Editors: T. Ishikawa and N. Takeda), ((edited by K. Kageyama, T. Ishikawa, N. Takeda, M. Hojo, S. Sugimoto and T. Ogasawara)).
[27]  Rasuo, B., Bengin, A. and Veg, A., On aerodynamical optimization of wind-farm layout by genetic algorithm method, The 6th International Congress on Industrial and Applied Mathematics, ICIAM 2007 (GAMM 2007), Zurich, Switzerland, 16-20 July.
[28]  Rosic, B., Rasuo, B., Applications of Multi-Objective Genetic Algorithm to Optimum Design Problems, 1st Symposium on Multidisciplinary Studies of Design in Mechanical Engineering, June, 25-28 2008, Bertinoro, Italy.
[29]  Rasuo, B., Siladic, M., On-Condition Maintenance for Non-Modular Jet Engines: An Experience, 26th ICAS CONGRESS, 14 - 19 September, 2008, Anchorage, Alaska, USA.
[30]  Rasuo, B., An Experimental Study of the Structural Damping of the Helicopter Main Rotor Blade from Composite Laminated Materials, The third EUCASS - European Conference for AeroSpace Sciences Conference, Palais des congres de Versailles, July 6-10, 2009, Versailles, France, Editor: M.L. Riethmuller, Copyright 2009 by the von Karman Institute for Fluid Dynamics.
[31]  Rasuo, B., Dinulovic, M., Bengin, A., Veg, A., Grbovic, A., Development of the Direct-Drive Wind Turbine Rotor Blades from Composite Materials, The Seventeenth International Conference on COMPOSITES/NANO ENGINEERING (ICCE - 17), July 26-August 1, 2009 in Honolulu, Hawaii, USA.
[32]  Rasuo, B., An Experimental Study of the Structural Damping of the Aeronautical Construction from Composite Laminated Materials, The 35th European Rotorcraft Forum, 22nd to 25th September 2009, the Radisson SAS Hotel, Hamburg, Germany.
[33]  Rasuo, B., Bengin, A., Veg, A., On Aerodynamic Optimization of Wind Farm Layout, 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2010), University of Karlsruhe, Karlsruhe, Germany, 22-26 March, 2010.
[34]  Rasuo, B., Dinulovic, M., Dielectric Modeling of E-Glass Epoxy Composite System, The Eighteenth Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE - 18), Anchorage, Alaska, USA, July 4-10, 2010.
[35]  Rasuo, B., An Experimental Technique for Verification Fatigue Characteristics of Laminated Constructions from Composite Materials: Full-Scale Testing of the Helicopter Rotor Blades, 27th ICAS CONGRESS, 19- 24 September, 2010, Nice, France.
[36]  Rasuo, B., Design, Fabrication and Testing of the Helicopter Tail Rotor Blade From Composite Materials: An Experience, The Royal Aeronautical Society - 2010 RAeS Structures & Materials Conference - 2nd Aircraft Structural Design Conference Tuesday 26 – Thursday 28 October 2010, London, UK.
[37]  Rasuo, B., An Experimental Methodology for Evaluating Survivability or Damage Tolerance of an Aeronautical Construction from Composite Materials, Celebrating 20 Years of DFC, A Joint Sheffield-Cambridge Conference, Deformation and Fracture of Composites (DFC-11) & Structural Integrity and Multi-scale Modelling (SI-5), 12-15 April 2011, The Queens´ College, The University of Cambridge, Cambridge, UK.
[38]  Rasuo, B., Dinulovic, M., Veg, A., Grbovic, A., Harmonization of new Wind Turbine Rotor Blades Development Process, ICCS16 - 16th International Conference on Composite Structures, June 28-30, 2011, The Faculty of Engineering of the University of Porto (FEUP), Porto, Portugal, Paper No. #459.
[39]   Rasuo, B., Bengin, A., Veg, A., An Aerodynamic Optimization of the Disposition of Wind Turbines Within the Farm, Part of CP65 Applications in Industry II, ICIAM 2011- 7th International Congress on Industrial and Applied Mathematics, The Vancouver Conference Centre, July 18 – 22, 2011, Vancouver, BC, Canada.
[40]   Rasuo, B., Dinulovic, M., Delamination Analysis At Free Edges Of Composite Laminates, ICCE-19 - The 19th Annual International Conference on Composites/Nano Engineering, July 24-30, 2011, Wyndham Bund East Hotel, Shanghai, China.
[41]   Rasuo, B., Bengin, A., Veg, A., Aerodynamic Optimization of the Arrangement of Wind Turbines within the Farm, Minisymposia - 12.1 Recent Advances in Topology Optimization, Session 5, USNCCM 11 - The 11th U.S. National Congress on Computational Mechanics, July 25-28, 2011, Minneapolis and St. Paul, Minnesota, USA.
[42]  Rasuo, B., Dinulovic, M., Free-Edge Stresses in Composite Laminates under Mechanical Loading, 18th International Conference on Composite Materials (ICCM-18), Jeju Island, Korea, August 21-26, 2011.
[43]  Rasuo, B., Development of the Helicopter Tail Rotor Blade from Composite Materials: An Experience, SAE 2011 AeroTech Congress & Exhibition, October 18-21, 2011, Centre de Congres Pierre Baudis & Toulouse Expo, Toulouse, France, Manufacturing/Materials/Structures - Composite Manufacturing (Part 2 of 3) ATC812, SAE 2011-01-2545.

Publications: Books/Book Chapters

[1]  Rasuo, B., Aircraft Production Technology, University of Belgrade, Belgrade, 1995. (in serbian).
[2]  Rasuo, B., Two-dimensional Transonic Wind Tunnel Wall Interference, Monographical Booklets in Applied & Computer Mathematics, MB-28/PAMM, Technical University of Budapest, Budapest, 2003.
[3]  Rasuo, B., Aeronautical Safeguarding, Military Academy, Belgrade, 2004 (in Serbian).
[4]  Rasuo, B., On Solving Boundary Value Problems in Fluid Mechanics by Fourier's Method: Wall Interference of Transonic Wind Tunnels, In: Analysis and Simulation of Multifield Problems (M. Efendiev, W. L. Wendland Eds.). Springer Lecture Notes in Applied Mechanics vol. 12. Springer Verlag, Berlin, August 2003.
[5]  Rasuo, B., Calculation of fluid-solid interaction at transonic wind tunnel testing, In: Trends in Applications of Mathematics to Mechanics (Yongqi Wang, Kolumban Hutter Eds.), Shaker Verlag, Aachen, 2005.
[6]  Rasuo, B., On Boundary Layer Control in Two-Dimensional Transonic Wind Tunnel Testing, In: IUTAM Symposium on One Hundred Years of Boundary Layer Research (Meier, G.E.A; Sreenivasan, K.R.; Heinemann, Hans-Joachim, Eds.), Series: Solid Mechanics and Its Applications, Vol. 129, Springer Verlag, Berlin, 2006.