International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

p-ISSN: 2166-479X
e-ISSN: 2166-4919
Website: http://journal.sapub.org/cmaterials

Carlo Santulli

Editorial Board Member of International Journal of Composite Materials

Associate Professor, Sapienza Università di Roma, Italy

Research Areas

Polymer Composites, Biocomposites, Natural Fibers

Education

2008	B.Sc	Science (courses in Natural Science and Environment), Open University
2004	M.Sc	Environmental Decision Making (EDM), Open University
2001	MA	Arts (Modern History)-Università "La Sapienza", Roma
2000	Ph.D	Materials Science and Engineering, University of Liverpool
1991	M.Sc	Chemical Engineering-Università "La Sapienza", Roma

Experience

2006-present	Associate professor, Università La Sapienza-Roma, Seconda Università di Napoli (from 2008)
2001-2006	Senior research fellow, University of Reading
1999-2001	Research associate, University of Nottingham
1998-1999	Research assistant, University of Liverpool
1996-1998	Researcher, Joint Research Centre-Ispra
1996	Researcher, K.U. Leuven & Ecole des Mines-St. Etienne
1994-1995	Research grant holder, Joint Research Centre-Ispra
1988-1993	Research assistant, Università La Sapienza-Roma

Publications: Journals

[1]	Arumugam V, Kumar S, Santulli C, Sarasini F, Stanley AJ, Identification of failure modes in composites from clustered acoustic emission data using pattern recognition and wavelet transformation, Arabian Journal of Science and Engineering B (in press).
[2]	Arumugam V, Kumar S, Santulli C, Stanley AJ, Effect of fiber orientation in uni-directional glass epoxy laminate using acoustic emission monitoring, Journal of Materials Science and Technology (English letters) (in press).
[3]	De Rosa IM, Iannoni A, Kenny JM, Puglia D, Santulli C, Sarasini F, Terenzi A, Poly(lactic acid)/phormium tenax composites: morphology and thermo-mechanical behaviour, Polymer Composites 32 (9), 2011, 1362-1368.
[4]	De Rosa IM, Marra F, Pulci G, Santulli C, Sarasini F, Tirillò J, Valente M, Post-impact mechanical characterisation of glass and basalt woven fabric laminates, Applied Composite Materials (in press).
[5]	De Rosa IM, Dell'Era A, Pasquali M, Santulli C, Sarasini F, Acoustic emission monitoring of activation behavior of LaNi5 hydrogen storage alloy, Science and Technology of Advanced Materials 12 (4), 2011, 045004.
[6]	Arumugam V, Kumar S, Santulli C, Sarasini F, Stanley AJ, A global method for the identification of failure modes in fibreglass using acoustic emission, Journal of Testing and Evaluation 39 (5), 2011, 103730.
[7]	Santulli C, Sarasini F, Acoustic emission for monitoring of composite laminates (in Italian and in English), Compositi June 2011, 40-48.
[8]	Kuan HTN, Cantwell WJ, Md Akil H, Santulli C, The Fracture Properties of Environmental-Friendly Fiber Metal Laminates, Journal of Reinforced Plastics and Composites 30 (6), 2011, 499-508.
[9]	Santulli C, Mechanical characterisation of n-isopropylacrylamide (NIPA) gels for use in smart actuators, Malaysian Polymer Journal 6 (1), 2011, 39-50.
[10]	De Rosa IM, Marra F, Pulci G, Santulli C, Sarasini F, Tirillò J, Valente M, Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates, Express Polymer Letters 5 (5), 2011, 449–459.
[11]	De Rosa IM, Kenny JM, Maniruzzaman Mohd, Moniruzzaman M, Monti M, Puglia D, Santulli C, Sarasini F, Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus Esculentus) fibres, Composites Science and Technology 71 (2), 2011, 246-254.
[12]	Santulli C, A step indentation loading procedure to monitor the effect of impact damage on E-glass/polyester woven laminates using acoustic emission, E-Journal of Nondestructive Testing 15 (11), November 2010.
[13]	Santulli C, Langella C, Hybridisation between technology and biology in design for sustainability, International Journal of Sustainable Design 1 (3), 2010, 293-304.
[14]	Santulli C, Langella C, Introducing students to bio-inspiration and biomimetic design: a workshop experience, International Journal of Technology and Design Education, available online, August 2010, DOI 10.1007/s10798-010-9132-6.
[15]	Caruso AP, De Rosa IM, Santulli C, Sarasini F, Planar indentation of jute/hemp fibre hybrid laminates monitored by acoustic emission, E-Journal of Nondestructive Testing 15 (7), July 2010.
[16]	De Rosa IM, Kenny JM, Puglia D, Santulli C, Sarasini F, Tensile behavior of New Zealand Flax (Phormium tenax) fibers, Journal of Reinforced Plastics and Composites (in press).
[17]	De Rosa IM, Santulli C, Sarasini F, Mechanical characterization of untreated waste office paper/woven jute fabric hybrid reinforced epoxy composites, Journal of Applied Polymer Science 119 (3), 2011, 1366–1373.
[18]	Akil Md H, De Rosa IM, Santulli C, Sarasini F, Flexural behavior of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission, Materials Science and Engineering A 527 (12), 2010, 2942-2950.
[19]	De Rosa IM, Santulli C, Sarasini F, Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated phormium tenax leaf fibers, Materials and Design 31 (5), 2010, 2397-2405.
[20]	De Rosa IM, Kenny JM, Puglia D, Santulli C, Sarasini F, Morphological and thermal characterisation of okra (Abelmoschus Esculentus) fibres as potential reinforcement in polymer composites, Composites Science and Technology 70 (1), 2010, 116-122.
[21]	Moniruzzaman Md, Maniruzzaman Mohd, Gafur Ma, Santulli C, Lady's finger fibres for possible use as a reinforcement in composite materials, Journal of Biobased Materials and Bioenergy 3 (3), 2009, 286-290.
[22]	Santulli C, Caruso AP, Effect of fibre architecture on falling weight impact properties of hemp/epoxy fibre laminates, Journal of Biobased Materials and Bioenergy 3 (3), 2009, 291-297.
[23]	Santulli C, Jeronimidis G, De Rosa IM, Sarasini F, Mechanical and falling weight impact behaviour of unidirectional phormium-epoxy laminates, eXPRESS Polymer Letters 3 (10), 2009, 650–656.
[24]	De Rosa IM, Santulli C, Sarasini F, Characterization of indentation damage on carbon/epoxy laminates by means of acoustic emission and IR thermography, E-Journal of Non Destructive Testing 14 (5), May 2009.
[25]	De Rosa IM, Santulli C, Sarasini F, Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review, Composites Part A 40 (9), 2009, 1456-1469.
[26]	Santulli C, Caruso AP, A Comparative Study on Falling Weight Impact Properties of Jute/Epoxy and Hemp/Epoxy Laminates, Malaysian Polymer Journal 4 (1), 2009, 19-29.
[27]	Dalu L, De Rosa I, Santulli C, Sarasini F, Acoustic emission monitoring of cyclic flexural tests on phormium/epoxy composites, E-journal of Non Destructive Testing 14 (2), February 2009.
[28]	De Rosa IM, Santulli C, Sarasini F, Valente M, Post-impact damage characterization of hybrid configurations of jute/glass polyester laminates using acoustic emission and IR thermography, Composites Science and Technology 66 (7-8), 2009, 1142-1150.
[29]	Donnelly N, Bibas A, Jiang D, Bamiou DE, Santulli C, Jeronimidis G, Fitzgerald O' Connor A, The effect of cochlear implant electrode insertion on middle ear function as measured by intra-operative Laser Doppler Vibrometry, Journal of Laryngology and Otology 123 (7), 2009, 723-729.
[30]	De Rosa IM, Santulli C, Sarasini F, Valente M, Effect of loading-unloading cycles on impact-damaged jute/glass hybrid laminates, Polymer Composites 30 (12), 2009, 1879-1887.
[31]	Santulli C, Marzinotto M, Mazzetti C, Thomas S, Influence of content and diameter of fibres and chemical treatment on the dielectric properties of oil palm fibres-rubber composites, Science and Engineering of Composite Materials 16 (2), 2009, 77-88.
[32]	Santulli C, Falling weight impact damage characterisation on flax/epoxy laminates, International Journal of Materials and Product Technology 36 (1-4), 2009, 221-228.
[33]	Caneva C, De Rosa IM, Santulli C, Sarasini F, Effect of untreated celery fibres on epoxy matrix composites, International Journal of Materials and Product Technology 36 (1-4), 2009, 21-29.
[34]	De Rosa IM, Santulli C, Sarasini F, Natural fiber composites monitored by acoustic emission, Journal of Acoustic Emission 26, 2008, 220-228.
[35]	Santulli C, Jeronimidis G, Microscopic lens thermography for the observation of features in light cardboard, E-Journal of Non-Destructive Testing 13 (6), June 2008.
[36]	Santulli C, IR thermography for the detection of buried objects: a short review, E-Journal of Non-Destructive Testing 12 (12), December 2007.
[37]	Johnson E, Bonser R, Jeronimidis G, Santulli C, The morphology and mechanics of Orthopteroidea mechanosensors, Comparative Biochemistry and Physiology A 146, 2007, S135.
[38]	Jiang D, Bibas A, Santulli C, Jeronimidis G, Fitzgerald O' Connor A, The equivalent noise level generated by drilling onto the ossicular chain as measured by laser Doppler vibrometry: a temporal bone study, Laryngoscope 117 (6), 2007, 1040-1045.
[39]	Santulli C, Jeronimidis G, Development of a method for nondestructive testing of fruits using scanning laser vibrometry (SLV), E-Journal of Non-Destructive Testing 11 (10), October 2006.
[40]	Santulli C, Review. Impact properties of glass/plant fibre hybrid laminates, Journal of Materials Science 42, 2007, 3699-3707.
[41]	Santulli C, Jeronimidis G, Measurement of surface void content on balsa wood using IR thermography, E-journal of Non-Destructive Testing 11 (6), June 2006.
[42]	Santulli C, Post-impact flexural tests on jute/polyester laminates monitored by acoustic emission, Journal of Materials Science 41, 2006, 1255-1260.
[43]	Santulli C, Patel SI, Jeronimidis G, Davis FJ, Mitchell GR, Development of smart variable stiffness actuators using polymer hydrogels, Smart Materials and Structures 14, 2005, 434-440.
[44]	Santulli C, Janssen M, Jeronimidis G, Partial replacement of E-glass fibres with flax fibres in composites and effect on falling weight impact performance, Journal of Materials Science 40, 2005, 3581-3585.
[45]	Santulli C, Critical length measurements in carbon fibres during single fibre fragmentation tests using acoustic emission, Journal of Materials Science 39, 2004, 2905-2907.
[46]	Santulli C, Impact damage characterisation of thermoplastic matrix composites using transmission transient thermography, Nondestructive Testing and Evaluation 19 (2), 2003, 79-90.
[47]	Santulli C, IR Thermography for impact damage evaluation of automotive composites and components, E-Journal of Non-Destructive Testing 9 (9), September 2003 (in Italian in Giornale delle Prove Non Distruttive. Monitoraggio and Diagnostica 24, 2003, n.3, 27-31).
[48]	Santulli C, Study of impact hysteresis curves on E-glass reinforced polypropylene laminates, Journal of Materials Science Letters 22, 2003, 1557-1562.
[49]	Santulli C, Alternatives for a hand lay-up composite structure: E-glass/epoxy adhesive joint or tapered laminate, Journal of Materials Science Letters 21, 2002, 1959-1963.
[50]	Santulli C, Garcia Gil R, Long AC, Clifford MJ, Void content measurements in thermoplastic composite materials through image analysis from optical micrographs, Science and Engineering of Composite Materials 10 (2), 2002, 77-90.
[51]	Santulli C, IR thermography study of the effect of moulding parameters on impact resistance in E-glass/polypropylene commingled laminates, NDT&and International 35, 2002, 377-383.
[52]	Santulli C, Billi F, Normal and off-axis compression tests of biocompatible titanium dental implants monitored by acoustic emission, Journal of Materials Science Letters 21, 2002, 727-730.
[53]	Santulli C, Brooks R, Long AC, Rudd CD, Influence of micro-structural voids on the mechanical and impact properties in commingled E-glass/polypropylene thermoplastic composites, Journal of Materials: Design and Applications Part L 216, 2002, 85-100.
[54]	Santulli C, Brooks R, Long AC, Rudd CD, Warrior NA, Impact properties of compression moulded commingled E-glass/polypropylene composites, Plastics, Rubber and Composites 31, 2002, 270-277.
[55]	Santulli C, Post-impact damage characterisation in natural fibre reinforced composites using acoustic emission, NDT&and International 34 (6), 2001, 531-536.
[56]	Santulli C, Cantwell WJ, Impact damage characterisation on jute/polyester composites, Journal of Materials Science 20, 2001, 477-479.
[57]	Santulli C, Mechanical and impact properties of untreated jute fabric reinforced polyester laminates compared with different E-glass fibre reinforced laminates, Science and Engineering of Composite Materials 9 (3), 2000, 177-188.
[58]	Santulli C, Thermoelastic analysis of phase transition in Ni-Ti shape memory alloys, Journal of Materials Science Letters 19 (12), 2000, 1071-1072.
[59]	Santulli C, Lucia AC, Relation between acoustic emission analysis during cure cycle and bonded joints performances, NDT& International 32 (6), 1999, 333-341.
[60]	Santulli C, Billi F, Control of tensile behaviour on shape memory alloys by means of acoustic and thermal emission techniques, Bulletin du Cercle d'Etudes des Metaux, 16 (16), November 1997, 12.1-12.14.
[61]	Billi F, Santulli C, Fatigue thermique sur plaquettes céramiques pour outils de coupe par émission acoustique, Matériaux et techniques 85 (9), 1997, 27-36.
[62]	Lucia AC, Santulli C, Study of mechanical behaviour in shape memory alloys through adiabatic thermal emission and acoustic emission technique, Journal de Physique IV 7, Nov. 1997, Colloque C5, C637-642.
[63]	Billi F, Santulli C, Thermal fatigue on ceramic coated cutting tips by acoustic emission, Bulletin du Cercle d'Etudes des Metaux, 16 (13), November 1996, 14.1-14.17.
[64]	Gariboldi E, Santulli C, Stivali F, Vedani M, Evaluation of damage in MMC's by acoustic emission technique, Materials Science Forum, 217-222 (3), 1996, 1461-1466.
[65]	Gariboldi E, Santulli C, Stivali F, Vedani M, Evaluation of tensile damage in particulate-reinforced MMCs by acoustic emission, Scripta Materialia 35 (2), 1996, 273-277.
[66]	Billi F, Santulli C, Correlation between fracture mechanics and acoustic emission detected during bending tests on ceramic materials by means of statistical methods, Bulletin du Cercle d'Etudes des Metaux 16 (11), November 1995, 20.1-20.22.
[67]	Caneva C, Olivieri S, Santulli C, Bonifazi G, Damage evaluation on advanced stitched composites under impact loads by means of image analysis and acoustic emission, Composite Structures 25 (1-4), 1993, 121-128.

Publications: Conferences/Workshops/Symposiums

[1]	Sfarra S, Ibarra-Castanedo C, Santulli C, Paoletti A, Paoletti D, Sarasini F, Bendada A, Maldague X, Effect of fiber reinforcement on the low velocity impact behavior of woven fabric reinforced composites: integrated contribution of the thermographic, interferometric and speckle inspections, ICCS16, Porto, June 2011.
[2]	Santulli C, Langella C, Concept transfer from biological junctions to end-of-life disassembly in industrial design, Biomimicry in Higher Education webinar, January 2011, 54-58.
[3]	Langella C, Santulli C, Design around nature. Nature as inspiration and image renovation for sustainable materials. LeNS Design Conference, Bangalore (India), September 2010.
[4]	De Rosa IM, Marra F, Pulci G, Santulli C, Sarasini F, Tirillò J, Valente M, Valente T, Comportamento dinamico di laminati compositi ibridi basalto/vetro con diverse sequenze di stratificazione: risultati preliminari, AIMAT Conference, Capo Vaticano, September 2010.
[5]	De Rosa IM, Iannoni A, Kenny JM, Puglia D, Santulli C, Sarasini F, Terenzi A, Environmentally friendly poly(lactic acid)/phormium tenax composite: thermal and mechanical characterization, ECCM 14, Budapest, June 2010.
[6]	Caneva C, De Rosa IM, Santulli C, Sarasini F (in Italian), 2-D acoustic emission localisation measurements during indentation of recycled polypropylene/hemp fibre composites, AIPnD Conference, Roma, October 2009.
[7]	Santulli C (in Italian), Analysis of thermoelastic images from impact on glass fibre reinforced composites using fractal profile analysis, AIPnD Conference, Roma, October 2009.
[8]	Caneva C, De Rosa IM, Santulli C, Sarasini F, Acoustic emission monitoring of mechanical tests on plant fibre composites, EWGAE2008, Krakow, September 2008.
[9]	Caneva C, De Rosa IM, Santulli C, Sarasini F, Characterization of indentation damage on carbon/epoxy laminates by means of acoustic emission, ECCM13, Stockholm, June 2008.
[10]	Santulli C, Finn TJ, Celery hollow stem as a template for biomimetic composites and textiles, BAEC Conference, Southampton, March 2008.
[11]	Araneo R, Arrighetti W, Baccarelli P, Burghignoli P, Celozzi S, Cipri F, Frezza F, Lovat G, Maradei F, Paulotto S, Piuzzi and, Santulli C, Valente T, Nanomixtures for Electromagnetic Absorbers: Numerical Characterization of Effective Parameters, ISMOT Conference, Monteporzio Catone, December 2007.
[12]	Marzinotto M, Mazzanti G, Mazzetti C, Pompili M, Santulli C, Schiaffino P, Investigation on thermal endurance of PVC compounds for low voltage cable insulation, CEIDP 2007, Vancouver, October 2007.
[13]	Marzinotto M, Santulli C, Mazzetti C, Dielectric properties of oil palm-natural rubber biocomposites, CEIDP 2007, Vancouver, October 2007.
[14]	Santulli C (in Italian), Use of thermography for the detection of buried objects: opportunities and issues, 12th AIPnD Conference, Milan, October 2007.
[15]	Santulli C, Falling weight impact properties of E-glass/jute hybrid laminates and non-linearity of their behaviour, ICEM8 conference, Brunel University, July 2007.
[16]	Santulli C, Jeronimidis G, Measurement of surface void content on balsawood using transient thermography, British Non-Destructive Testing Conference, Stratford upon Avon, September 2006.
[17]	Santulli C, Measurement of impact-damaged areas in commingled E-glass/polypropylene laminates via thermographic images analysis, QIRT 2006 Conference, Padova, June 2006.
[18]	Santulli C, Finn TJ, Seidel R, Jeronimidis G, Scanning LDV for Vibration Measurement of Filiform Hairs in Crickets in Response to Induced Airflow, Laser Vibrometry Conference, Ancona, June 2006.
[19]	Santulli C, Jeronimidis G (in Italian), Laser vibrometry for quality control on fruits, AIPnD Conference, Milan, October 2005 (ISBN 88-89758-02-3).
[20]	Santulli C, Jeronimidis G, Damage detection in fruits using Laser Doppler vibrometry, British Non-Destructive Testing Conference, Torquay, September 2004.
[21]	Santulli C, Jeronimidis G, Vibration tests for non-destructive control in apples and avocados, British Non-Destructive Testing Conference, Worcester, September 2003.
[22]	Santulli C (in Italian), IR thermography for damage evaluation on automotive composites and components, AIPnD Conference, Ravenna, April 2003.
[23]	Santulli C, Jeronimidis G, Patel SI, Davis FJ, Mitchell GR, Development of smart actuators using n-isopropylacrylamide gels, Biomimetics World Conference, Albuquerque, NM, December 2002.
[24]	Santulli C (in Italian), Introduction of 3-D fibres and impact performance of commingled E-glass fibre/polypropylene composites, AIMAT Conference, Modena, September 2002 (on CD-ROM).
[25]	Warrior NA, Rudd CD, Brooks R, Long AC, Wilson MJ, Santulli C, Development of a thermoplastic composite side intrusion beam, Conf. on Materials for Lean Weight Vehicles, Gaydon, October 2001.
[26]	Santulli C, Drezet D, Brooks R, Rudd CD, Relation between moulding conditions and mechanical and impact properties in commingled E-glass/polypropylene thermoplastic composites, EUROMAT Conference, Rimini, June 2001.
[27]	Santulli C, Brooks R, Long AC, Rudd CD, Wilson MJ, Warrior NA, Impact properties of thermoplastic laminates for automotive applications, ACP2000, Dunton, December 2000.
[28]	Santulli C, Cantwell WJ, Characterisation of the damage area in glass fibre reinforced composites using AE planar localisation, World NDT Conference, Roma, October 2000.
[29]	Santulli C, Dulieu-Barton JM, Cantwell WJ, Thermoelastic investigation on impact damaged woven GRP composites, MPSV Conference, Nottingham, September 2000.
[30]	Billi F, Santulli C (in Italian), Acoustic emission during compression tests on titanium dental implants, AIMAT national conference, Cagliari, June 1998.
[31]	Billi F, Caneva C, Santulli C, Thermal damage analysis by combined thermographic inspection and AE localisation on honeycomb panels, Acoustic Emission Conference, Vienna, May 1998.
[32]	Santulli C, A study of the reliability of neural network approach to manage acousto-ultrasonics results on bonded joints, Acoustic Emission Testing Conference, Vienna, May 1998.
[33]	Santulli C, Synergetic use of thermal and acoustic emission in studying tensile behaviour of fibre reinforced composites, Risø Materials Science Symposium, Roskilde, September 1997.
[34]	Billi F, Santulli C, Stivali F, Reliability of glass fibre-epoxy adhesive joints under repeated loading cycles through acoustic emission and acousto-ultrasonic technique, Euromech 358, Nevers, September 1997.
[35]	Santulli C, Billi F (In Italian), Acoustic emission during post-impact tensile tests of woven composite laminates, AIPnD Conference, Padova, September 1997.
[36]	Santulli C (In Italian), Thermographic monitoring during fatigue tests on carbon fibre reinforced composites, IGF13 Conference, Cassino, May 1997.
[37]	Tsamtsakis D, Wevers M, De Meester P, Santulli C, Damage characterization of fatigue loaded quasi-isotropic carbon epoxy laminates, using acoustic emission and other non-destructive techniques, ICCE3, New Orleans, July 1996.
[38]	Billi F, Santulli C, A study on the mechanical behaviour of PSZ (5% wt. yttria) during bending tests comparing Weibull statistical model and acoustic emission results, Fracture Mechanics of Ceramics, Plenum Press, NY, 1996, 11, 451-457.
[39]	Billi F, Santulli C (In Italian), Effect of transverse fatigue loading on the stiffness reduction of carbon reinforced composites, IGF12 Conference, Parma June 1996.
[40]	Calabrò A, Esposito C, Billi F, Sangalli D, Santulli C, Buonocore V, Giordano M, Analysis of manufacturing problems related with metal-metal aerospace structural joints through acoustic emission and differential scanning calorimetry, Acoustic Emission Testing Conference, Aberdeen May 1996.
[41]	Santulli C (In Italian), Structural significance of AE events distribution during tensile tests monitoring on composites, AIPnD Conference, Torino October 1995.
[42]	Aiello A, Caneva C, Santulli C (In Italian), Quality control of Al/Al sandwich structures by thermography and acoustic emission, AIPnD Conference, Torino October 1995.
[43]	Tatti M, Santulli C (In Italian), Fibre optic sensor for acoustic emission signals acquisition, AIPnD Conference, Torino October 1995.
[44]	Calabrò A, Santulli C, Improving structural properties of metal/metal bonding by acoustic emission and ultrasonic inspection, International Symposium on materials ageing and component life extension, Milano October 1995.
[45]	Aiello A, Caneva C, Santulli C, Stivali F, AE monitoring in fatigue tests on Al2O3 reinforced aluminium alloy, AECM5, Sundsvall, July 1995.
[46]	Santulli C, Solomos GP, Calabrò A, Caneva C, D'Antonio L, AE monitoring during cure cycle of metal/metal (2024 T3 alloy) adhesive joint for quality assessment, AECM5, Sundsvall July 1995.
[47]	Gariboldi E, Santulli C, Stivali F, Vedani M (In Italian), Damage evaluation on metal matrix composites by acoustic emission monitoring, IGF11 Conference, Brescia July 1995.
[48]	Aiello A, Caneva C, Santulli C (In Italian), Quality and predictive maintenance of naval structures reliability by non-destructive control, "New material technologies and their application on naval structures", Livorno, April 1995.
[49]	Lucia AC, Solomos GP, Santulli C, Marini R, Caretta A (in Italian), Evaluation of composite structures performance by acoustic emission, Acoustic Emission CISE symposium, Milano, November 1994.
[50]	Solomos GP, Lucia AC, Santulli C, Caretta A, Adhesive joint quality assessment via Acoustic Emission monitoring, European Conference on NDT, Nice, October 1994.
[51]	Caneva C, Santulli C, Stivali F, Processing defects evaluation on metal matrix by means of acoustic emission, ICCE2, New Orleans, July 1994.
[52]	Caneva C, Santulli C, Soloni A, Stivali F (in Italian), Analysis of scattering from a theoretical model in fracture mode of MMCs, IGF10 Conference, Torino June 1994.
[53]	Billi F, Caneva C, Santulli C (in Italian), Bending mode fracture study with acoustic emission on yttria partially stabilised zirconia, IGF10 Conference, Torino June 1994.
[54]	Caneva C, Santulli C, Stivali F (in Italian), Acoustic emission for evaluation of mechanical behaviour in metal matrix composites, AIPnD Conference, Ferrara October 1993.
[55]	Caneva C, Santulli C, Stivali F (in Italian), Loads distribution in filament-wound pressure vessel during the hydraulic test, IGF9 Conference, Roma June 1993.
[56]	Caneva C, Pampallona A, Santulli C (in Italian), Acoustic Emission for structural monitoring of marble monuments. Fontana di Trevi and Basilica Palladiana, Conference for the study and conservation of artworks, Viterbo October 1992.
[57]	EAMA, Bench Mark Exercise on AE Measurements from Carbon Fiber-BMI Composites, AECM4 Seattle, July 1992.
[58]	Caneva C, Franciosa A, Mazzola M, Santulli C (in Italian), Quality evaluation by acoustic emission in filament-wound composite vessels, IGF8 Conference, Genova, May 1992.

Publications: Books/Book Chapters