International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

José Ignacio Velasco

Editorial Board Member of International Journal of Composite Materials

Professor, Technical University of Catalonia-UPC, Spain

Research Areas

Microcellular Multifunctional Foams, Composite Materials, Polymers

Education

1996Ph.DMaterials Science in Technical University of Catalonia-UPC
1991LicenciaturaOrganic Chemistry, in University of Valladolid

Experience

2008-presentFull University Professor in Department of Material Science and Metallurgy of Technical University of Catalonia
1997-2001Assistant Professor, Technical University of Catalonia-UPC
2001-2008Associate Professor, Technical University of Catalonia-UPC

Publications: Conferences/Workshops/Symposiums/Journals/Books

[1]  Title: Broad-band electrical conductivity of carbon nanofibre-reinforced polypropylene foams Author(s): Antunes, Marcelo; Mudarra, Miguel; Ignacio Velasco, Jose Source: Carbon Volume: 49 Issue: 2 Pages: 708-717 Published: 2011 Times Cited: 0 DOI: 10.1016/j.carbon.2010.10.032
[2]  Title: Characterization of highly filled magnesium hydroxide-polypropylene composite foams Author(s): Antunes, Marcelo; Ignacio Velasco, Jose; Haurie, Laia Source: Journal of Cellular Plastics Volume: 47 Issue: 1 Pages: 17-30 Published: 2011 Times Cited: 0 DOI: 10.1177/0021955X10370186
[3]  Title: Esparto wool as reinforcement in hybrid polyurethane composite foams Author(s): Antunes, Marcelo; Cano, Alvaro; Haurie, Laia; et al. Source: Industrial Crops and Products Volume: 34 Issue: 3 Pages: 1641-1648 Published: NOV 2011 Times Cited: 0 DOI: 10.1016/j.indcrop.2011.06.016
[4]  Title: Influence of the Electric Arc Furnace Dust in the physical and mechanical properties of EVA-polyethylene-butene blends Author(s): Niubo, M.; Fernandez, A. I.; Haurie, L.; et al. Source: Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing Volume: 528 Issue: 13-14 Pages: 4437-4444 Published: MAY 24 2011 Times Cited: 0 DOI: 10.1016/j.msea.2011.02.006
[5]  Title: Mg-Al Layered double hydroxide nanoparticles Evaluation of the thermal stability in polypropylene matrix Author(s): Ardanuy, M.; Velasco, J. I. Source: Applied Clay Science Volume: 51 Issue: 3 Pages: 341-347 Published: 2011 Times Cited: 0 DOI: 10.1016/j.clay.2010.12.024
[6]  Title: Microcellular Foaming of Layered Double Hydroxide-Polymer Nanocomposites Author(s): Martinez, Antonio B.; Realinho, Vera; Antunes, Marcelo; et al. Source: Industrial & Engineering Chemistry Research Volume: 50 Issue: 9 Pages: 5239-5247 Published: 2011 Times Cited: 0 DOI: 10.1021/ie101375f
[7]  Title: Characterization of Carbon Nanofibre-Reinforced Polypropylene Foams Author(s): Antunes, M.; Velasco, J. I.; Realinho, V.; et al. Source: Journal of Nanoscience and Nanotechnology Volume: 10 Issue: 2 Pages: 1241-1250 Published: 2010 Times Cited: 3 DOI: 10.1166/jnn.2010.1831
[8]  Title: Characterization of Highly Oriented Organoclay/Poly(methyl methacrylate) Moulded Nanocomposites Author(s): Realinho, V.; Velasco, J. I.; Antunes, M.; et al. Source: Journal of Nanoscience and Nanotechnology Volume: 10 Issue: 2 Pages: 1304-1312 Published: 2010 Times Cited: 0 DOI: 10.1166/jnn.2010.1832
[9]  Title: Effect of the Recycling and Annealing on the Mechanical and Fracture Properties of Poly(Lactic Acid) Author(s): Nascimento, L.; Gamez-Perez, J.; Santana, O. O.; et al. Source: Journal of Polymers and the Environment Volume: 18 Issue: 4 Pages: 654-660 Published: 2010 Times Cited: 2 DOI: 10.1007/s10924-010-0229-5
[10]  Title: Foaming Behaviour, Structure, and Properties of Polypropylene Nanocomposites Foams Author(s): Antunes, M.; Realinho, V.; Velasco, J. I. Source: Journal of Nanomaterials Issue: Journal Article Pages: 306384-306384 Published: 2010
[11]  Title: Foaming Behaviour, Structure, and Properties of Polypropylene Nanocomposites Foams Author(s): Antunes, M.; Realinho, V.; Velasco, J. I. Source: Journal of Nanomaterials Published: 2010 Times Cited: 0 DOI: 10.1155/2010/306384
[12]  Title: Preparation and characterization of cellulosic fibre-reinforced polypropylene foams Author(s): Ardanuy, Monica; Antunes, Marcelo; Ignacio Velasco, Jose Source: Advanced Materials Research Volume: 123-125 Issue: Journal Article Pages: 1183-1186 Published: 2010
[13]  Title: Preparation and characterization of cellulosic fibre-reinforced polypropylene foams Author(s): Ardanuy, Monica; Antunes, Marcelo; Ignacio Velasco, Jose; et al. Source: Multi-Functional Materials and Structures Iii, Pts 1 and 2 Volume: 123-125 Pages: 1183-1186 Published: 2010 Times Cited: 0 DOI: 10.4028/www.scientific.net/AMR.123-125.1183
[14]  Title: Structure and Properties of Polypropylene/Hydrotalcite Nanocomposites Author(s): Ardanuy, M.; Velasco, J. I.; Antunes, M.; et al. Source: Polymer Composites Volume: 31 Issue: 5 Pages: 870-878 Published: 2010 Times Cited: 2 DOI: 10.1002/pc.20869
[15]  Title: Study of the Influence of the Pressure Drop Rate on the Foaming Behavior and Dynamic-Mechanical Properties of CO2 Dissolution Microcellular Polypropylene Foams Author(s): Antunes, Marcelo; Realinho, Vera; Ignacio Velasco, Jose Source: Journal of Cellular Plastics Volume: 46 Issue: 6 Pages: 551-571 Published: 2010 Times Cited: 1 DOI: 10.1177/0021955X10382609
[16]  Title: The Effect of Anionic Clay Particles on the Structure and Thermomechanical Behavior of Sodium Partially-Neutralized EMAA Ionomer Author(s): Ardanuy, M.; Velasco, J. I.; Rodriguez-Perez, M. A.; et al. Source: Journal of Applied Polymer Science Volume: 116 Issue: 5 Pages: 2573-2579 Published: 2010 Times Cited: 0 DOI: 10.1002/app.31818
[17]  Title: The Role of Polyhedral Oligomeric Silsesquioxane on the Thermo-Mechanical Properties of Polyoxymethylene Copolymer Based Nanocomposites Author(s): Illescas, S.; Arostegui, A.; Schiraldi, D. A.; et al. Source: Journal of Nanoscience and Nanotechnology Volume: 10 Issue: 2 Pages: 1349-1360 Published: 2010 Times Cited: 1 DOI: 10.1166/jnn.2010.1845
[18]  Title: Characterization of poly(ethylene-co-vinyl acetate) (EVA) filled with low grade magnesium hydroxide Author(s): Fernandez, A. I.; Haurie, L.; Formosa, J.; et al. Source: Polymer Degradation and Stability Volume: 94 Issue: 1 Pages: 57-60 Published: 2009 Times Cited: 5 DOI: 10.1016/j.polymdegradstab.2008.10.008
[19]  Title: Effect of a Dodecylsulfate-Modified Magnesium-Aluminum Layered Double Hydroxide on the Morphology and Fracture of Polystyrene and Poly(styrene-co-acrylonitrile) Composites Author(s): Realinho, V.; Antunes, M.; Arencon, D.; et al. Source: Journal of Applied Polymer Science Volume: 111 Issue: 5 Pages: 2574-2583 Published: 2009 Times Cited: 1 DOI: 10.1002/app.29288
[20]  Title: Effect of Clay Content and Speed Screw Rotation on the Crystallization and Thermal Behaviors of Recycled PET/Clay Nanocomposites Author(s): Giraldi, A. L. F. de M.; Bizarria, M. T. M.; Silva, A. A.; et al. Source: Journal of Nanoscience and Nanotechnology Volume: 9 Issue: 6 Pages: 3883-3890 Published: 2009 Times Cited: 6 DOI: 10.1166/jnn.2009.NS84
[21]  Title: Heat Transfer in Polypropylene-Based Foams Produced Using Different Foaming Processes Author(s): Antunes, Marcelo; Ignacio Velasco, Jose; Realinho, Vera; et al. Source: Advanced Engineering Materials Volume: 11 Issue: 10 Pages: 811-817 Published: 2009 Times Cited: 3 DOI: 10.1002/adem.200900129
[22]  Title: Influence of EMAA Compatibilizer on the Structure and Properties of HDPE/Hydrotalcite Nanocomposites Prepared by Melt Mixing Author(s): Ardanuy, M.; Velasco, J. I.; Maspoch, M. L.; et al. Source: Journal of Applied Polymer Science Volume: 113 Issue: 2 Pages: 950-958 Published: 2009 Times Cited: 3 DOI: 10.1002/app.30133
[23]  Title: Microstructure anisotropy in polyolefin flexible foams Author(s): Antunes, M.; Arencon, D.; Realinho, V.; et al. Source: IOP Conference Series-Materials Science and Engineering Issue: Journal Article Pages: 012001-012001 Published: 2009
[24]  Title: Microstructure anisotropy in polyolefin flexible foams Author(s): Antunes, M.; Arencon, D.; Realinho, V.; et al. Source: 5th International Eeigm-Amase-Forgemat Conference on Advanced Materials Research Published: 2009 Times Cited: 0 DOI: 10.1088/1757-899X/5/1/012001
[25]  Title: Study of the Cellular Structure Heterogeneity and Anisotropy of Polypropylene and Polypropylene Nanocomposite Foams Author(s): Antunes, Marcelo; Ignacio Velasco, Jose; Realinho, Vera; et al. Source: Polymer Engineering and Science Volume: 49 Issue: 12 Pages: 2400-2413 Published: 2009 Times Cited: 5 DOI: 10.1002/pen.21488
[26]  Title: The Essential Work of Fracture (EWF) method-Analyzing the Post-Yielding Fracture Mechanics of polymers Author(s): Martinez, A. B.; Gamez-Perez, J.; Sanchez-Soto, M.; et al. Source: Engineering Failure Analysis Volume: 16 Issue: 8 Pages: 2604-2617 Published: 2009 Times Cited: 5 DOI: 10.1016/j.engfailanal.2009.04.027
[27]  Title: Effects of extrusion conditions on the properties of recycled poly(ethylene terephthalate)/nanoclay nanocomposites prepared by a twin-screw extruder Author(s): Giraldi, A. L. F. de M.; Bizarria, M. T. M.; Silva, A. A.; et al. Source: Journal of Applied Polymer Science Volume: 108 Issue: 4 Pages: 2252-2259 Published: 2008 Times Cited: 5 DOI: 10.1002/app.27280
[28]  Title: Non-isothermal crystallization kinetics and activity of filler in polypropylene/Mg-Al layered double hydroxide nanocomposites Author(s): Ardanuy, M.; Velasco, J. I.; Realinho, V.; et al. Source: Thermochimica Acta Volume: 479 Issue: 1-2 Pages: 45-52 Published: 2008 Times Cited: 10 DOI: 10.1016/j.tca.2008.09.016
[29]  Title: Effects of milling on the thermal stability of synthetic hydromagnesite Author(s): Haurie, L.; Fernandez, A. I.; Velasco, J. I.; et al. Source: Materials Research Bulletin Volume: 42 Issue: 6 Pages: 1010-1018 Published: 2007 Times Cited: 5 DOI: 10.1016/j.materresbull.2006.09.020
[30]  Title: Essential work of fracture analysis of glass micro sphere-filled polypropylene and polypropylene/poly (ethylene terephthalateco-isophthalate) blend-matrix composites Author(s): Arencon, D.; Velasco, J. I.; Realinho, V.; et al. Source: Polymer Testing Volume: 26 Issue: 6 Pages: 761-769 Published: 2007 Times Cited: 4 DOI: 10.1016/j.polymertesting.2007.03.009
[31]  Title: Foaming behaviour and cellular structure of LDPE/hectorite nanocomposites Author(s): Velasco, J. I.; Antunes, M.; Ayyad, O.; et al. Source: Polymer Volume: 48 Issue: 7 Pages: 2098-2108 Published: 2007 Times Cited: 15 DOI: 10.1016/j.polymer.2007.02.008
[32]  Title: Foams based on low density polyethylene/hectorite nanocomposites: Thermal stability and thermomechanical properties Author(s): Velasco, J. I.; Antunes, M.; Ayyad, O.; et al. Source: Journal of Applied Polymer Science Volume: 105 Issue: 3 Pages: 1658-1667 Published: 2007 Times Cited: 4 DOI: 10.1002/app.26254
[33]  Title: Fracture toughness of glass microsphere-filled polypropylene and polypropylene/poly (ethylene terephthalate-co-isophthalate) blend-matrix composites Author(s): Arencon, D.; Velasco, J. I.; Realinho, V.; et al. Source: Journal of Materials Science Volume: 42 Issue: 1 Pages: 19-29 Published: 2007 Times Cited: 3 DOI: 10.1007/s10853-006-1036-1
[34]  Title: Morphology and thermomechanical properties of recycled PET-organoclay nanocomposites Author(s): Bizarria, Maria T. M.; Giraldi, Andr L. F. de M.; de Carvalho, Cesar M.; et al. Source: Journal of Applied Polymer Science Volume: 104 Issue: 3 Pages: 1839-1844 Published: 2007 Times Cited: 13 DOI: 10.1002/APP.25836
[35]  Title: The role of poly(ethylene terephthalate-co-isophthalate) as interfacial agent in polypropylene-matrix composites Author(s): Arencon, D.; Velasco, J. I.; Ardanuy, M.; et al. Source: Journal of Materials Science Volume: 42 Issue: 8 Pages: 2782-2791 Published: 2007 Times Cited: 3 DOI: 10.1007/s10853-006-0178-5
[36]  Title: Thermal stability and flame retardancy of LDPE/EVA blends filled with synthetic hydromagnesite/aluminium hydroxide/montmorillonite and magnesium hydroxide/aluminium hydroxide/montmorillonite mixtures Author(s): Haurie, Laia; Fernandez, Ana Ines; Velasco, Jose Ignacio; et al. Source: Polymer Degradation and Stability Volume: 92 Issue: 6 Pages: 1082-1087 Published: 2007 Times Cited: 14 DOI: 10.1016/j.polymdegradstab.2007.02.014
[37]  Title: Polypropylene/clay nanocomposites: Combined effects of clay treatment and compatibilizer polymers on the structure and proverties Author(s): Velasco, J. I.; Ardanuy, M.; Realinho, V.; et al. Source: Journal of Applied Polymer Science Volume: 102 Issue: 2 Pages: 1213-1223 Published: 2006 Times Cited: 5 DOI: 10.1002/app.24419
[38]  Title: Structural and mechanical studies on modified reused tyres composites Author(s): Colom, X.; Canavate, J.; Carrillo, F.; et al. Source: European Polymer Journal Volume: 42 Issue: 10 Pages: 2369-2378 Published: 2006 Times Cited: 16 DOI: 10.1016/j.eurpolymj.2006.06.005
[39]  Title: Study of hydromagnesite and magnesium hydroxide based fire retardant systems for ethylene-vinyl acetate containing organo-modified montmorillonite Author(s): Laoutid, F.; Gaudon, P.; Taulemesse, J. M.; et al. Source: Polymer Degradation and Stability Volume: 91 Issue: 12 Pages: 3074-3082 Published: 2006 Times Cited: 19 DOI: 10.1016/j.polymdegradstab.2006.08.011
[40]  Title: Synthetic hydromagnesite as flame retardant. Evaluation of the flame behaviour in a polyethylene matrix Author(s): Haurie, L.; Fernandez, A. I.; Velasco, J. I.; et al. Source: Polymer Degradation and Stability Volume: 91 Issue: 5 Pages: 989-994 Published: 2006 Times Cited: 27 DOI: 10.1016/j.polymdegradstab.2005.08.009
[41]  Title: Determination of essential work of fracture in EPBC sheets obtained by different transformation processes Author(s): Gamez-Perez, J.; Munoz, P.; Velasco, J. I.; et al. Source: Journal of Materials Science Volume: 40 Issue: 8 Pages: 1967-1974 Published: 2005 Times Cited: 6 DOI: 10.1007/s10853-005-1218-2
[42]  Title: Dynamic mechanical behavior of PP/PET/MAPP blends filled with glass beads Author(s): Rodriguez-Perez, M. A.; Velasco, J. I.; Gonzalez-Pena, J. I.; et al. Source: Macromolecular Symposia Volume: 221 Issue: Journal Article Pages: 247-256 Published: 2005
[43]  Title: Dynamic mechanical behavior of PP/PET/MAPP blends filled with glass beads Author(s): Rodriguez-Perez, MA; Velasco, JI; Gonzalez-Pena, JI; et al. Source: Macromolecular Symposia Volume: 221 Pages: 247-256 Published: JAN 2005 Times Cited: 4 DOI: 10.1002/masy.200550325
[44]  Title: Glass fibre recycled poly(ethylene terephthalate) composites: mechanical and thermal properties Author(s): Giraldi, A. L. F. D.; Bartoli, J. R.; Velasco, J. I.; et al. Source: Polymer Testing Volume: 24 Issue: 4 Pages: 507-512 Published: 2005 Times Cited: 10 DOI: 10.1016/j.polymertesting.2004.11.011
[45]  Title: Impact characterization of a carbon fiber-epoxy laminate using a nonconservative model Author(s): Martinez, A. B.; Sanchez-Soto, M.; Velasco, J. I.; et al. Source: Journal of Applied Polymer Science Volume: 97 Issue: 6 Pages: 2256-2263 Published: 2005 Times Cited: 4 DOI: 10.1002/app.21894
[46]  Title: Poly(propylene)/PET/undecyl ammonium montmorillonite nanocomposites. Synthesis and characterization Author(s): Velasco, J. I.; Ardanuy, M.; Miralles, L.; et al. Source: Macromolecular Symposia Volume: 221 Issue: Journal Article Pages: 63-73 Published: 2005
[47]  Title: Poly(propylene)/PET/undecyl ammonium montmorillonite nanocomposites. Synthesis and characterization Author(s): Velasco, JI; Ardanuy, M; Miralles, L; et al. Source: Macromolecular Symposia Volume: 221 Pages: 63-73 Published: JAN 2005 Times Cited: 7 DOI: 10.1002/masy.200550307
[48]  Title: Synthetic hydromagnesite as flame retardant. A study of the stearic coating process Author(s): Haurie, L.; Fernandez, A. I.; Velasco, J. I.; et al. Source: Macromolecular Symposia Volume: 221 Issue: Journal Article Pages: 165-174 Published: 2005
[49]  Title: Synthetic hydromagnesite as flame retardant. A study of the stearic coating process Author(s): Haurie, L; Fernandez, AI; Velasco, JI; et al. Source: Macromolecular Symposia Volume: 221 Pages: 165-174 Published: JAN 2005 Times Cited: 11 DOI: 10.1002/masy.200550317
[50]  Title: The effect of glass fibre and a phosphorus-containing flame retardant on the flammability of recycled PET Author(s): Maspoch, M. L.; Ferrando, H. E.; Vega, D.; et al. Source: Macromolecular Symposia Volume: 221 Issue: Journal Article Pages: 175-184 Published: 2005
[51]  Title: The effect of glass fibre and a phosphorus-containing flame retardant on the flammability of recycled PET Author(s): Maspoch, ML; Ferrando, HE; Vega, D; et al. Source: Macromolecular Symposia Volume: 221 Pages: 175-184 Published: JAN 2005 Times Cited: 4 DOI: 10.1002/masy.200550318
[52]  Title: Low energy impact indentation: a complete model Author(s): Jimenez, O.; Sanchez-Soto, M.; Santana, O. O.; et al. Source: Boletin De La Sociedad Espanola De Ceramica Y Vidrio Volume: 43 Issue: 2 Pages: 324-326 Published: 2004 Times Cited: 1
[53]  Title: Poly(propylene)/poly(ethylene terephthalate-co-isophthalate) blends and glass bead filled composites: Microstructure and thermomechanical properties Author(s): Arencon, D.; Velasco, J. I.; Rodriguez-Perez, M. A.; et al. Source: Journal of Applied Polymer Science Volume: 94 Issue: 4 Pages: 1841-1852 Published: 2004 Times Cited: 10 DOI: 10.1002/app.21146
[54]  Title: Characterisation of filled and recycled PA6 Author(s): Maspoch, M. L.; Ferrando, H. E.; Velasco, J. I. Source: Macromolecular Symposia Volume: 194 Issue: Journal Article Pages: 295-303 Published: 2003
[55]  Title: Characterisation of filled and recycled PA6 Author(s): Maspoch, ML; Ferrando, HE; Velasco, JI Source: Macromolecular Symposia Volume: 194 Pages: 295-303 Published: APR 2003 Times Cited: 7 DOI: 10.1002/masy.200390096
[56]  Title: Milled glass fiber filled-poly(ethylene terephthalate-co-isophthalate) composites-Thermal and mechanical properties Author(s): Velasco, J. I.; Arencon, D.; Sanchez-Soto, M.; et al. Source: Journal of Thermoplastic Composite Materials Volume: 16 Issue: 4 Pages: 365-380 Published: 2003 Times Cited: 3 DOI: 10.1177/089270503028497
[57]  Title: The effect of compatibilizing and coupling agents on the mechanical properties of glass bead filled PP/PET blends Author(s): Arencon, D.; Maspoch, M. L.; Velasco, J. I. Source: Macromolecular Symposia Volume: 194 Issue: Journal Article Pages: 225-232 Published: 2003
[58]  Title: The effect of compatibilizing and coupling agents on the mechanical properties of glass bead filled PP/PET blends Author(s): Arencon, D; Maspoch, ML; Velasco, JI Source: Macromolecular Symposia Volume: 194 Pages: 225-232 Published: APR 2003 Times Cited: 1 DOI: 10.1002/masy.200390087
[59]  Title: Characterisation of injected EPBC plaques using the essential work of fracture (EWF) method Author(s): Maspoch, M. L.; Gamez-Perez, J.; Gordillo, A.; et al. Source: Polymer Volume: 43 Issue: 15 Pages: 4177-4183 Published: 2002 Times Cited: 25 DOI: 10.1016/S0032-3861(02)00259-8
[60]  Title: Glass bead filled polystyrene composites: morphology and fracture Author(s): Sanchez-Soto, M.; Gordillo, A.; Maspoch, M. L.; et al. Source: Polymer Bulletin Volume: 47 Issue: 6 Pages: 587-594 Published: 2002 Times Cited: 10 DOI: 10.1007/s002890200025
[61]  Title: J-R curve determination of magnesium hydroxide filled polypropylene using the normalization method Author(s): Morhain, C.; Velasco, J. I. Source: Journal of Materials Science Volume: 37 Issue: 8 Pages: 1635-1644 Published: 2002 Times Cited: 8 DOI: 10.1023/A:1014944729912
[62]  Title: The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection-moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 1. A wide-angle X-ray diffraction study Author(s): Velasco, J. I.; Morhain, C.; Martinez, A. B.; et al. Source: Polymer Volume: 43 Issue: 25 Pages: 6805-6811 Published: 2002 Times Cited: 14 DOI: 10.1016/S0032-3861(02)00668-7
[63]  Title: The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection-moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 2. Thermal and dynamic mechanical properties Author(s): Velasco, J. I.; Morhain, C.; Martinez, A. B.; et al. Source: Polymer Volume: 43 Issue: 25 Pages: 6813-6819 Published: 2002 Times Cited: 25 DOI: 10.1016/S0032-3861(02)00669-9
[64]  Title: The influence of injection-molding variables and nucleating additives on thermal and mechanical properties of short glass fiber/PET composites Author(s): Arencon, D.; Velasco, J. I. Source: Journal of Thermoplastic Composite Materials Volume: 15 Issue: 4 Pages: 317-336 Published: 2002 Times Cited: 8 DOI: 10.1106/089270502021456
[65]  Title: Anisotropy and microstructure heterogeneity of injection-moulded discs of poly(propylene) filled with platy magnesium hydroxide Author(s): Velasco, J. I.; Morhain, C.; Martinez, A. B.; et al. Source: Macromolecular Materials and Engineering Volume: 286 Issue: 11 Pages: 719-730 Published: 2001 Times Cited: 13 DOI: 10.1002/1439-2054(20011101)286:11<719::AID-MAME719>3.0.CO;2-6
[66]  Title: Determination of J-R curve of polypropylene copolymers using the normalization method Author(s): Morhain, C.; Velasco, J. I. Source: Journal of Materials Science Volume: 36 Issue: 6 Pages: 1487-1499 Published: 2001 Times Cited: 15 DOI: 10.1023/A:1017500930544
[67]  Title: Filled PMMA: Mechanical properties and fracture behaviour Author(s): Maspoch, M. L.; Tafzi, A.; Ferrando, H. E.; et al. Source: Macromolecular Symposia Volume: 169 Issue: Journal Article Pages: 159-164 Published: 2001
[68]  Title: Filled PMMA: Mechanical properties and fracture behaviour Author(s): Maspoch, ML; Tafzi, A; Ferrando, HE; et al. Source: Macromolecular Symposia Volume: 169 Pages: 159-164 Published: MAY 2001 Times Cited: 6 DOI: 10.1002/1521-3900(200105)169:1<159::AID-MASY159>3.0.CO;2-A
[69]  Title: Polypropylene filled with flame retardant fillers: Mechanical and fracture properties Author(s): Velasco, J. I.; Morhain, C.; Arencon, D.; et al. Source: Macromolecular Symposia Volume: 169 Issue: Journal Article Pages: 165-170 Published: 2001
[70]  Title: Polypropylene filled with flame retardant fillers: Mechanical and fracture properties Author(s): Velasco, JI; Morhain, C; Arencon, D; et al. Source: Macromolecular Symposia Volume: 169 Pages: 165-170 Published: MAY 2001 Times Cited: 3 DOI: 10.1002/1521-3900(200105)169:1<165::AID-MASY165>3.0.CO;2-M
[71]  Title: Tensile behaviour and fracture toughness of EPDM filled with untreated and silane-treated glass beads Author(s): Arencon, D.; Velasco, J. I. Source: Journal of Materials Science Volume: 36 Issue: 1 Pages: 179-187 Published: 2001 Times Cited: 7 DOI: 10.1023/A:1004809608048
[72]  Title: The activity of inorganic substrates in the catalysed nucleation of different polymer melts Author(s): Rodriguez-Perez, M. A.; Vasiliev, T.; Dobreva-Veleva, A.; et al. Source: Macromolecular Symposia Volume: 169 Issue: Journal Article Pages: 137-142 Published: 2001
[73]  Title: The activity of inorganic substrates in the catalysed nucleation of different polymer melts Author(s): Rodriguez-Perez, MA; Vasiliev, T; Dobreva-Veleva, A; et al. Source: Macromolecular Symposia Volume: 169 Pages: 137-142 Published: MAY 2001 Times Cited: 4 DOI: 10.1002/1521-3900(200105)169:1<137::AID-MASY137>3.0.CO;2-Q
[74]  Title: Essential work of fracture on PET films: influence of the thickness and the orientation Author(s): Maspoch, M. L.; Henault, V.; Ferrer-Balas, D.; et al. Source: Polymer Testing Volume: 19 Issue: 5 Pages: 559-568 Published: 2000 Times Cited: 26 DOI: 10.1016/S0142-9418(99)00026-4
[75]  Title: Fracture of EPDM filled with glass beads applying the essential work of fracture Author(s): Velasco, J. I.; Arencon, D.; Maspoch, M. L.; et al. Source: Boletin De La Sociedad Espanola De Ceramica Y Vidrio Volume: 39 Issue: 4 Pages: 514-519 Published: 2000 Times Cited: 0
[76]  Title: Heterogeneity and anisotropy of injection-molded discs of polypropylene and polypropylene composites Author(s): Diez-Gutierrez, S.; Rodriguez-Perez, M. A.; De Saja, J. A.; et al. Source: Journal of Applied Polymer Science Volume: 77 Issue: 6 Pages: 1275-1283 Published: 2000 Times Cited: 5
[77]  Title: Mechanical characterization of closed-cell polyolefin foams Author(s): Rodriguez-Perez, M. A.; Velasco, J. I.; Arencon, D.; et al. Source: Journal of Applied Polymer Science Volume: 75 Issue: 1 Pages: 156-166 Published: 2000 Times Cited: 16 DOI: 10.1002/(SICI)1097-4628(20000103)75:1<156::AID-APP18>3.0.CO;2-U
[78]  Title: Rigidity characterisation of flexible foams by falling dart rebound tests Author(s): Velasco, J. I.; Martinez, A. B.; Arencon, D.; et al. Source: Cellular Polymers Volume: 19 Issue: 2 Pages: 115-133 Published: 2000 Times Cited: 3
[79]  Title: Application of instrumented falling dart impact to the mechanical characterization of thermoplastic foams Author(s): Velasco, J. I.; Martinez, A. B.; Arencon, D.; et al. Source: Journal of Materials Science Volume: 34 Issue: 3 Pages: 431-438 Published: 1999 Times Cited: 9 DOI: 10.1023/A:1004565822502
[80]  Title: Dynamic mechanical analysis of injection-moulded discs of polypropylene and untreated and silane-treated talc-filled polypropylene composites Author(s): Diez-Gutierrez, S.; Rodriguez-Perez, M. A.; De Saja, J. A.; et al. Source: Polymer Volume: 40 Issue: 19 Pages: 5345-5353 Published: 1999 Times Cited: 45 DOI: 10.1016/S0032-3861(98)00754-X
[81]  Title: Characterisation of fracture behaviour at low strain rate of PC/ABS blends Author(s): Santana, O. O.; Martinez, A. B.; Velasco, J. I.; et al. Issue: Book, Whole Pages: 1440 Published: 1998
[82]  Title: Characterisation of fracture behaviour at low strain rate of PC/ABS blends. Author(s): Santana, OO; Martinez, AB; Velasco, JI; et al. Source: Ecf 12: Fracture From Defects, Vols. I-Iii Pages: 1435-1440 Published: 1998 Times Cited: 0
[83]  Title: Effect of particle size on the fracture behaviour of aluminium hydroxide filled polypropylene Author(s): Velasco, J. I.; Morhain, C.; Maspoch, M. L.; et al. Issue: Book, Whole Pages: 1386 Published: 1998
[84]  Title: Effect of particle size on the fracture behaviour of aluminium hydroxide filled polypropylene Author(s): Velasco, JI; Morhain, C; Maspoch, ML; et al. Source: Ecf 12: Fracture From Defects, Vols. I-Iii Pages: 1381-1386 Published: 1998 Times Cited: 1
[85]  Title: Low-rate fracture behaviour of magnesium hydroxide filled polypropylene block copolymer Author(s): Velasco, J. I.; Morhain, C.; Arencon, D.; et al. Source: Polymer Bulletin Volume: 41 Issue: 5 Pages: 615-622 Published: 1998 Times Cited: 8 DOI: 10.1007/s002890050409
[86]  Title: The essential work of fracture of polyolefinic films Author(s): Maspoch, M. L.; Ferrer, D.; Santana, O. O.; et al. Issue: Book, Whole Pages: 1428 Published: 1998
[87]  Title: The essential work of fracture of polyolefinic films Author(s): Maspoch, ML; Ferrer, D; Santana, OO; et al. Source: Ecf 12: Fracture From Defects, Vols. I-Iii Pages: 1423-1428 Published: 1998 Times Cited: 0
[88]  Title: Constrained crystallization and activity of filler in surface modified talc polypropylene composites Author(s): Alonso, M.; Velasco, J. I.; deSaja, J. A. Source: European Polymer Journal Volume: 33 Issue: 3 Pages: 255-262 Published: 1997 Times Cited: 60 DOI: 10.1016/S0014-3057(96)00159-0
[89]  Title: Fracture behaviour of untreated and silane-treated talc-filled polypropylene composites Author(s): Velasco, J. I.; deSaja, J. A.; Martinez, A. B. Source: Fatigue & Fracture of Engineering Materials & Structures Volume: 20 Issue: 5 Pages: 659-670 Published: 1997 Times Cited: 16 DOI: 10.1111/j.1460-2695.1997.tb00299.x
[90]  Title: Crystallization behavior of polypropylene filled with surface-modified talc Author(s): Velasco, J. I.; deSaja, J. A.; Martinez, A. B. Source: Journal of Applied Polymer Science Volume: 61 Issue: 1 Pages: 125-132 Published: 1996 Times Cited: 79 DOI: 10.1002/(SICI)1097-4628(19960705)61:1<125::AID-APP14>3.0.CO;2-6