International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.

Amar Patnaik

Editorial Board Member of International Journal of Composite Materials

Assistant Professor, National Institute of Technology, Hamirpur, India

Research Areas

Tribology of Composite Materials (Polymer, Metal and Functionally Graded materials)

Education

2009Ph.DMechanical Engineering, National Institute of Technology, Rourkela (Orissa), India
2005M.TechProduction Engineering, National Institute of Technology, Rourkela (Orissa), India
2003MBAMarketing, BPUT, Rourkela (Orissa), India
2000B.E.Mechanical Engineering, RTE, REC, Hulkoti, Karnataka

Experience

2007-presentN.I.T, Hamirpur (H.P), India, Asst. Professor Engineering Department
2005-2006G.I.E.T, Gunupur (Orissa), India, Sr. Lecturer, Mechanical Engineering Department
2000-2001G.I.E.T, Gunupur (Orissa), India, Lecturer, Mechanical Engineering Department

Membership

ISTE Life Member (Membership number: LM 36538)
Tribology Society of India: Life member LM 395

Publications: Journals

[1]  Modification of unsaturated polyester resin with liquid crystal thermoset bismaleimide resin, Polymer Engineering & Science (John Wiley & Sons).
[2]  Super-Ductile PBT alloy with Excellent Heat Resistance, Polymer Engineering & Science (John Wiley & Sons).
[3]  Carbon/Silica Composite Fabricated from Rice Husk by Means of Binderless Hot-pressing, Bio-resource Technology (Elsevier).
[4]  Optimization of Optics with Micro Diffractive Optical Element via Hybrid Taguchi Genetic Algorism, Optics and Lasers in Engineering (Elsevier).
[5]  CFD analysis of flow over car variants & validation with Ahmed Body, CURIE Journal (BITS, Pilani).
[6]  Experimental Determination of Heat Transfer Coefficient of Turbulent Flow in Helical Coil with Circular Cross-Section and Its Comparison with Rectangular Cross Section, CURIE Journal (BITS, Pilani).
[7]  A null-buoyancy thermal flow meter: Application to the measurement of the hydraulic conductivity of soils, IEEE Sensors Journal.
[8]  Modification of unsaturated polyester resin with liquid crystal thermoset bismaleimide resin, Journal of Materials Science (Spinger).
[9]  Solid particle erosion of glass epoxy composite strengthen by metal powder, Journal of Composite Materials (SAGE).
[10]  Wear Properties of 3-aminopropyltriethoxysiane-Functionalized Carbon Nanotubes Reinforced Ultra High Molecular Weight Polyethylene Nanocomposites, Polymer Engineering & Science (John Wiley & Sons).
[11]  A Computational and Experimental Investigation on Thermal Conductivity of Particle Reinforced Epoxy Composites, Computational Materials Science (Elsevier).
[12]  S.S. Mahapatra and Amar Patnaik, (2006), Determination of Optimal Parameters Settings in Wire Electrical Discharge Machining (WEDM) Process using Taguchi method, The Institution of Engineering, Vol. 187, pp.16-24.
[13]  S.S. Mahapatra and Amar Patnaik, (2006), Optimization of Parameter Combinations in Wire Electrical Discharge Machining using Taguchi method" Indian journal of engineering & material sciences, Indian Journal of Engineering & Material Sciences, Vol. 13, pp.493-502.
[14]  Alok Satapathy, Amar Patnaik, Varun, S.K. Pradhan, and Maheshwar Dwivedy, (2008), Optimization of Cutting Parameters in Turning Operations using Taguchi Method' Icfai Journal of Mechanical Engineering, Vol. 1(1), pp.7-27.
[15]  Sandhyarani Biswas, Alok Satapathy and Amar Patnaik, (2009), Erosion Response of Glass-Epoxy Composites Filled with Red Mud Particulates, 50th Technical Journal of Orissa State Centre, Institutions of Engineers (India), pp.14-27.
[16]  Alok Satapathy, Sandhyarani Biswas and Amar Patnaik, (2009), Manufacturing of low-cost Polymer Composites using available Bio-resources of Rural Orissa, 50th Technical Journal of Orissa State Centre, Institutions of Engineers (India), pp.206-216.
[17]  Amar Patnaik, Alok Satapathy, Sandhyarani Biswas, (2009), Effect of Different Filler Materials on The Abrasive Wear Behavior of Glass Fiber Reinforced Polymer Matrix Composites, Materials Science: An Indian Journal vol.5(3), pp.175-183.
[18]  Sandhyarani Biswas, Subhrajit Ray, Alok Satapathy, Amar Patnaik, (2009), Erosion wear behavior of TiO2 filled glass fiber reinforced epoxy composites, Materials Science: An Indian Journal vol.5(3), pp. 258-266.
[19]  Amar Patnaik, Md Abdula, Sandhyarani Biswas and Alok Satapathy, (2009), Thermal conductivity of particulate filled polymer composites, Materials Science: An Indian Journal, Ma74652306.
[20]  Amar Patnaik, Alok Satapathy, Sandhyarani Biswas, (2009), Sliding Wear Analysis Of Natural Fiber Reinforced Polymer Composite, Environmental Science: An Indian Journal, Vol. 4(6).
[21]  Alok Satapathy, Suvendu Prasad Sahu, Debadutta Mishra, Amar Patnaik, (2009), Plasma Sprayed Fly Ash Coating on Metal Substrates, Materials Science: An Indian Journal, Vol. 5 (4).
[22]  Siddhartha, Amar Patnaik, Amba D Bhatt, (2009), Functionally Graded Materials Manufacturing Techniques: A review, Materials Science: An Indian Journal, Vol. 5 (4).
[23]  Amar Patnaik, Sandhyarani Biswas, Alok Satapathy, Ritesh Kaundal, (2011). Processing, Characterization and Erosion Wear Analysis of SiC Filled Glass-Epoxy-Composites, International Journal of Computational Materials Science and Surface Engineering (IJCMSSE) vol. 4(2), pp.168-184.
[24]  Siddhartha, Amar Patnaik, Amba D. Bhatt, (2011). Mechanical and Dry Sliding Wear Characterisation of Epoxy-TiO2 Particulate filled functionally Graded Composites Materials using Taguchi Design of Experiment. Materials and Design, vol. 32(2), pp. 615-627.
[25]  Naresh Dayma, Bhabani K Satapathy, Amar Patnaik, (2011). Structural correlations to sliding wear performance of PA-6/PP-g-MA/nanoclay ternary nanocomposites, Wear, vol. 271(5-6), pp. 827-836
[26]  Bhabani K. Satapathy, Abhijit Majumdar, Harjeet S. Jaggi, Amar Patnaik, Bharat S. Tomar, (2011). Targeted material design of flyash filled composites for friction braking application by non-linear regression optimization technique. Computational Materials Science, vol. 50(11), pp. 3145-3152.
[27]  Bhabani K. Satapathy, Amar Patnaik, Nandan Dadkar, Dilip K. Kolluri, Bharat S. Tomar, (2011). Influence of vermiculite on performance of flyash-based fibre-reinforced hybrid composites as friction materials, Materials & Design, vol. 32 (8-9), pp. 4354-4361.
[28]  Sandhyarani Biswas, Sanjay Kindo, Amar Patnaik, (2011).Effect of Fiber Length on Mechanical Behavior of Coir Fiber Reinforced Epoxy Composites, Fiber and Polymer, vol.12(1), pp. 73-78.
[29]  Sandeep Kumar, Bhabani K. Satapathy, Amar Patnaik, (2011). Viscoelastic interpretations of erosion performance of short aramid fibre reinforced vinyl ester resin composites, Journal of Materials Science, DOI 10.1007/s10853-011-5719-x.
[30]  Sandhyarani Biswas, Basu Deo, Amar Patnaik, Alok Satapathy, (2011). Effect of Fiber Loading and Orientation on Mechanical and Erosion Behaviour of Glass/Epoxy Composites, Polymer Composites, vol. 32(4), pp. 665-674.
[31]  Pradeep Kumar A.K.Redhewal, Amar patnaik, Mukesh kumar, (2011). To study stress convergence of finite element model using three node triangular, four and eight node rectangular elements and its choice for different application, International journal of research in engineering science & technology, vol. 2(1), pp. 1-5.
[32]  Siddhartha, Amar Patnaik, Amba D. Bhatt, (2011). Exploring the possibility of utilization of Red mud-epoxy based functionally Graded Materials as wear resistant materials using Taguchi methodology, Tribology Transactions (Accepted)
[33]  Sachin Tejyan, Amar Patnaik, Amit Rawal, Bhabani K. Satapathy, (2011). Structural and Mechanical properties of Needlepunched Nonwoven Reinforced Composites in Erosive Environment, Journal of Applied Polymer Science (Accepted).
[34]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, (2010). Recent Developments in Natural Fiber Reinforced Polymer Composites and their Erosion Wear Characteristics, Journal of Natural Fiber (accepted).
[35]  Mamatha T.G, Amar Patnaik, Sandhyarani Biswas, Predeep Kumar. (2011). Finite element modeling and development of SiC filled ZA-27 alloy composites in erosive wear environment: A comparative analysis. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology (Accepted).
[36]  Anu Gupta, Ajit Kumar, Amar Patnaik , Sandhyarani Biswas, (2011). Effect of different parameters on mechanical and erosion wear behavior of bamboo fiber reinforced epoxy composites. International Journal of Polymer Science (Special Issue: Natural Fibers, Bio-and Nanocomposites) (Accepted).
[37]  Mukesh Kumar, Bhabani K. Satapathy, Amar Patnaik, Dilip K. Kolluri, Bharat S. Tomar, (2011). Friction-fade and friction-recovery behavior of hybrid friction composites based on ternary combination of ceramic-fibres, ceramic-whiskers and aramid-fibres. Journal of Applied Polymer Science (Accepted).
[38]  Bhabani K. Satapathy, Amar Patnaik, Nandan Dadkar, Prasanta Rath, Bharat S. Tomar, (2011). Investigations on friction-fade and friction-recovery performance of phenolic composites based on flyash-graphite combinations for braking applications. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology (Accepted).
[39]  Amar Patnaik, Mukesh Kumar, Bhabani K. Satapathy, Bharat S. Tomar, (2010) Performance sensitivity of hybrid phenolic composites in friction braking: Effect of ceramic and aramid fibre combination, Wear, vol.269(11-12), pp.891-899.
[40]  Sandeep Kumar, Bhabani K. Satapathy, Amar Patnaik, (2010). Thermo-mechanical correlations to erosion performance of short carbon fiber reinforced vinyl ester resin composites, Materials and Design, 10.1016/j.matdes.2010.11.019.
[41]  Bhabani K. Satapathy, Arijit Das, Amar Patnaik, (2010).Ductile-to-brittle transition in cenosphere filled polypropylene composites, Journal of Materials Science, doi 10.1007/s10853-010-5032-0.
[42]  Siddhartha, Amar Patnaik, Alok Satapathy, Amba D. Bhatt, (2010). A Study on Modified Mechanical and Wear Characteristics of Epoxy-Particulate Filled homogenous composites and their Functionally Graded Materials. Journal of Tribology (ASME), doi., 133, 011601.
[43]  Alok Satapathy, Alok Kumar Jha, Sisir Mantry, S. K. Singh, Amar Patnaik, (2010), Erosive Wear Performance Analysis of Jute-Epoxy-SiC hybrid composites, Journal of Composite Materials, vol. 44(13), pp. 1623-1641.
[44]  Amar Patnaik, Ritesh Kaundal, Alok Satapathy, Sandhyarani Biswas, Pradeep Kumar, (2010). Solid Particle Erosion of particulate filled Short Glass Fiber Reinforced Polyester Resin Composites, Advanced Materials Research, vol.123-125, pp. 213-216.
[45]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, (2010). Effect of Ceramic Fillers on Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites: A Comparative Study, Advanced Materials Research, vol.123-125, pp. 1031-1034.
[46]  Siddhartha, Amar Patnaik, Amba D. Bhatt, (2010).Friction and Wear analysis of a Cement Kiln dust reinforced Epoxy based Functionally Graded Materials, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.224, 1103-1114.
[47]  Suvendu Pr. Sahu, Alok Satapathy, Deba dutta Mishra, Amar Patnaik and K.P.Sreekumar, (2010). Tribo-Performance Analysis of Fly Ash–Aluminum Coatings Using Experimental Design and ANN, Tribology Transactions, vol. 53, pp.1-10.
[48]  Amar Patnaik, Md Abdulla, Alok Satapathy, Sandhyarani Biswas, Bhabani K. Satapathy, (2010), A Study on Possible Correlation between Thermal Conductivity and Wear Resistance of Particulate Filled Polymer Composites, Materials and Design, vol. 31, pp. 837-849.
[49]  Nandan Dadkar, Bharat S. Tomar, Bhabani K. Satapathy, Amar Patnaik, (2010), Performance assessment of hybrid composite friction materials based on flyash-rock fibre combination, Materials and Design, vol.31( 2), pp. 723-731.
[50]  Amar Patnaik, Alok Satatpathy, Navin Chand, N.M. Barkoula, Sandhyarani Biswas, (2010), Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: a review, Wear, vol.68( 1-2), pp. 249-263.
[51]  Suvendu Prasad Sahu, Alok Satapathy, Amar Patnaik, K.P. Sreekumar, P.V.Ananthapadmanabhan, (2010) Development, Characterization and Erosion Wear Response of Plasma Sprayed Fly Ash-Aluminium Coatings, Materials and Design, vol.31( 3), pp.1165-1173.
[52]  Amar Patnaik, Alok Satapathy, Maheshwas Dwivedy, Sandhyarani Biswas (2010), Wear behaviour of Plant-fiber (Pine-Bark) and Cement-kiln-dust Reinforced Polyester Composites using Taguchi Experimental Model, Journal of Composite Materials, vol. 44(5), pp. 559-574.
[53]  Bhabani K. Satapathy, Amar Patnaik, (2010).Wear performance analysis and optimization of flyash-enhanced aramid fibre reinforced polymer matrix composites, Research Journal of Textile and Apparel, vol.14(3), 35-46.
[54]  Amar Patnaik, Sachin Tejyan, Amit Rawal, (2010). Solid Particle Erosion Behavior of Needlepunched Nonwoven Reinforced Composites, Research Journal of Textile and Apparel, vol. 14(3), pp.12-22.
[55]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash. (2010), Modified Erosion Wear Characteristics of Glass-Polyester Composites by Silicon Carbide Filling: A Parametric Study using Taguchi Technique, International Journal of Materials and Product Technology(Materials Processing Technology), vol. 38 2/3, pp.131-152.
[56]  Amar Patnaik, S.S.Mahapatra, R.R.Dash, (2010), Flyash Filling for Improved Wear Resistance of Glass-Polyester Composites : An Experimental Study, The Journal of Solid Waste Technology and Management, vol. 36(1), pp.26-37.
[57]  Mukesh Kumar, Bhabani K. Satapathy, Amar Patnaik, Dilip K. Kolluri, Bharat S. Tomar (2011). Hybrid composite friction materials reinforced with combination of potassium titanate whiskers and aramid fibre: Assessment of fade and recovery performance, Tribology International, vol. 44(4), pp.359-367.
[58]  Amar Patnaik, Alok Satapathy, Sandhyarani Biswas (2010). Investigations on Three-Body Abrasive Wear and Mechanical Properties of Particulate Filled Glass Epoxy Composites. Malaysian Polymer Journal, vol. 5(2), pp. 37-48.
[59]  Amar Patnaik, Alok Satapathy, Sandhyarani Biswas (2010). Effect of Particulate Fillers on Erosion Wear of Glass Polyester Composites:A Comparative Study using Taguchi Approach, Malaysian Polymer Journal, vol. 5(2), pp. 49-68.
[60]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash., (2009), Modeling and Prediction of Erosion Response of Glass Reinforced Polyester-Flyash Composites, Journal of Reinforced Plastics and Composites, vol.28, pp. 513-536.
[61]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash, (2009), A Comparative Study on Different Ceramic Fillers affecting Mechanical Properties of Glass-Polyester Composites, Journal of Reinforced Plastics and Composites, vol. 28(11), pp.1305-1318.
[62]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash. (2009), Tribo-Performance of Polyester Hybrid Composites: Damage Assessment and Parameter Optimization using Taguchi Design, Materials and Design, vol. 30, pp. 57–67.
[63]  Amar Patnaik, Alok Satapathy, S.S.Mahapatra, (2009), Study on Erosion Response of Hybrid Composites using Taguchi Experimental Design, Journal of Engineering Materials and Technology, ASME, vol. 131, pp. 1-16.
[64]  S. Chauhan, Amar Patnaik, B. Kaith, Alok Satapathy, Maheshwar Dwivedy, (2009), Analysis of Mechanical Behavior of Phenol Formaldehyde Matrix Composites Using Flax-g-Poly (MMA) as Reinforcing Materials, Journal of Reinforced Plastics and Composites, vol. 28, pp.1933-1944.
[65]  Varun Goel, Amar Patnaik, R.P. Saini, S.K. Singal, Siddhartha Vashishtha, (2009), Optimisation Prediction of Solar Air Heater Using Artificial Roughness as Transverse and Inclined Ribs by Taguchi Method, Renewable Energy, vol.34(12), pp. 2914-2922.
[66]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, (2009), Erosion Wear Behaviour of Polymer Composites: A Review, Journal of Reinforced Plastics and Composites, doi: 10.1177/0731684408097786.
[67]  Alok Satapathy, Amar Patnaik, Manoj Kumar Pradhan, (2009), A Study on Processing, Characterization and Erosion Behavior of Fish (Labeo-Rohita) Scale Filled Epoxy Matrix Composites, Materials and Design, vol.30 (7), pp.2359-2371.
[68]  Amar Patnaik, Alok Satapathy, (2009), Erosion Wear Response of Flyash-GF-Polyester Composites: A Study using Taguchi Experimental Design, Malaysian Polymer Journal, vol. 2 (2), pp.1-16.
[69]  S.R.Chauhan, Anoop Kumar, Amar Patnaik, Alok Satapathy, I.Singh, (2009), Mechanical and Wear Characterization of GF Reinforced Vinyl Ester Resin Composites with Different Co-Monomers, Journal of Reinforced Plastics and Composites, vol. 28( 21), pp. 2675-2684.
[70]  S.S. Mahapatra, Amar Patnaik, (2009), Study on Mechanical and Erosion Wear Behavior of Hybrid Composites using Taguchi Experimental Design, Materials and Design, vol.30(8), pp.2791-2801
[71]  Alok Satapathy, Alok Kumar Jha, Sisir Mantry, S. K. Singh, A. Patnaik, (2009), Processing and Characterization of Jute–epoxy Composites Reinforced with SiC Derived from Rice Husk, Journal of reinforced plastics and composites, doi: 10.1177/0731684409341757.
[72]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, (2009). Effect of Ceramic Fillers on Mechanical Properties of Glass Fiber Reinforced Epoxy Composites: A Comparative Study, Journal of Reinforced Plastics and Composites, doi: 10.1177/0731684409352113.
[73]  Siddhartha, Amar Patnaik, Amba D. Bhatt. (2009). A review on Functionally Graded Materials Manufacturing Techniques, Journal of Reinforced Plastics and Composites, doi: 10.1177/0731684409348347. Publication in the year 2008
[74]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash, (2008), Erosive Wear Assesment of Glass Reinforced Polyester-Flyash Composites using Taguchi Method, International Polymer Processing, vol.23(2), pp. 1-8.
[75]  S.S. Mahapatra, Amar Patnaik, Alok Satapathy, R.R.Dash, (2008) Taguchi Method Applied to Parametric Appraisal of Erosion Behavior of GF-Reinforced Polyester Composites, Wear, vol.265, pp.214–222.
[76]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash, (2008), A Modeling Approach for Prediction of Erosion Behavior of Glass Fiber-Polyester Composites, Journal of Polymer Research, vol.15(2), pp.147–160.
[77]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash., (2008), A Taguchi Approach for Investigation of Erosion of Glass Fiber–Polyester Composites, Journal of Reinforced Plastics and Composites, vol. 27(8), pp.871-888.
[78]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash., (2008), Parametric Optimization of Erosion Wear of Polyester-GF-Alumina Hybrid Composites using Taguchi Method, Journal of Reinforced Plastics and Composite, vol. 27(10), pp.1039-1058.
[79]  Amar Patnaik, Alok Satapathy, S.S. Mahapatra, R.R.Dash, (2008), Implementation of Taguchi Design for Erosion of Fiber Reinforced Polyester Composite Systems with SiC Filler, Journal of Reinforced Plastics and Composite, vol. 27(10), pp. 1093-1111.
[80]  Alok Satapathy, Amar Patnaik. (2008), Analysis of Dry Sliding Wear Behaviour of Red Mud Filled Polyester Composites using Taguchi Method, Journal of Reinforced Plastics and Composites, doi:10.1177/0731684408092453.
[81]  Alok Satapathy, Amar Patnaik, (2008), Wear Characteristics of Metal Matrix Composites Reinforced with Fly-Ash Particles, Journal of Reinforced Plastics and Composites, doi.org/10.1177/0731684408092453.
[82]  S.S. Mahapatra, Amar Patnaik, (2007), Optimization of Wire Electrical Discharge Machining (WEDM) process Parameters using Taguchi Method, Int. J. Adv. Manuf. Technol., vol.34, pp. 911–925.
[83]  Amar Patnaik, Sandhyarani Biswas, S.S. Mahapatra, (2007), An Evolutionary Approach for Parameter Optimization of Submerged Arc Welding in Hard facing Process, International Journal of Manufacturing Research, vol.2(4), pp.462-483. Publication in the year 2006
[84]  S.S. Mahapatra, Amar Patnaik, (2006), Optimization of Wire Electrical Discharge Machining (WEDM) Process Parameters using Taguchi method, International Journal for Manufacturing Science & Technology, vol.9(2), pp.129-144.
[85]  S.S. Mahapatra, Amar Patnaik (2006), Parametric Optimization of Wire Electrical Discharge Machining (WEDM) Process using Taguchi method, Journal of the Brazilian Society of Mechanical Sciences, vol.28(4), pp.423-430.
[86]  S.S. Mahapatra Amar Patnaik, M.S.Khan, (2006), Development and Analysis of Wear Resistance Model for Composites of Aluminium Reinforced with Redmud, The journal of Solid Waste Technology and Management, vol. 32(1), pp.5-12.
[87]  S.S. Mahapatra, Amar Patnaik, (2006), Parametric Analysis and Optimization of Drilling of Metal Matrix Composites based on the Taguchi Method, International Journal for Manufacturing Science and Technology, vol. 8(1), pp.5-12.

Publications: Conferences/Workshops/Symposiums

[1]  S.S. Mahapatra and Amar Patnaik, Analysis and Optimization of Parameter Combinations in Wire Electrical Discharge Machining, 49th Congress of ISTAM, National Institute of Technology, Rourkela, 2004.
[2]  N. Kavi and Amar Patnaik, Buckling Analysis of Pillar Drilling Machine using FEM, National Conference on Emerging Trends in Concurrent Engineering, National Institute of Technology, Rourkela, 2005.
[3]  Amar Patnaik and S.S. Mahapatra, Optimization of Cutting Parameters in Turning Operations Using Genetic Algorithm, National Seminar on Advances in Soft Computing, 21st National Convention of Computer Engineers, BBSR, 2007.
[4]  S. K. Pradhan, D.R.Parhi, Amar Patnaik, R.K.Behera, Navigation of Mobile Robots, National Conference on QRMAES, 2007, pp. 316-325.
[5]  Amar Patnaik, S.K. Pradhan, and Maheshwar Dwivedy, Parametric Analysis and Optimization of Cutting Operations based on Taguchi method, National conference on Recent Advances in Innovative Materials, 2008, Feb16-17.
[6]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, Analysis of Erosion Wear Behavior of Red Mud Filled Glass-Epoxy Hybrid Composites Using Taguchi Method, National Conference on Mechanism Science and Technology: from Theory to Application, National Institute of Technology, Hamirpur, 2008, November 13-14.
[7]  Alok Satapathy, Amar Patnaik, Sisir Mantry, Suvendu Prasad Sahu , Development of Plasma Sprayed Composite Coatings, National Conference on Mechanism Science and Technology: from Theory to Application, National Institute of Technology, Hamirpur, 2008, November 13-14.
[8]  Alok Satapathy, Amar Patnaik, Sisir Mantry, Erosive wear behaviour of fly-ash filled aluminium matrix composites, National Conference on Mechanism Science and Technology: from Theory to Application, National Institute of Technology, Hamirpur, 2008, November 13-14.
[9]  Naresh Kumar, Amar Patnaik, Anu Gupta, Susheel Kumar, Development and Sliding wear characterisation of pine bark reinforced polyester resin composites filled with cement by-pass dust (CBPD), National Conference on Mechanism Science and Technology: from Theory to Application, National Institute of Technology, Hamirpur, 2008, November 13-14
[10]  A.P.S. Gaur, Anand Pandey, Amar Patnaik, Alok Satapathy, Sliding wear analysis of fiber reinforced polymer composites materials, National Conference on Mechanism Science and Technology: from Theory to Application, National Institute of Technology, Hamirpur, 2008, November 13-14.
[11]  Amar Patnaik, Alok Satapathy, Investigations on Three-body abrasive wear and mechanical properties of particulate filled glass Epoxy composites, National Symposium for Materials Research Scholars, MR-09, Workshop on Advanced Characterization Techniques, IIT, Mumbay, May 7th-9th, 2009.
[12]  Amar Patnaik, Sandhyarani Biswas, Alok Satapathy, A study on mechanical and wear properties of particulate filled short glass-fiber reinforced epoxy composites, 3rd National Symposium for Materials Research Scholars (MR-10) and Workshop on Advanced Characterization Techniques, 6th-8th May 2010.
[13]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, Effect of impingement angle and erodent temperature on erosion behaviour of bamboo fiber reinforced epoxy composites, 3rd National Symposium for Materials Research Scholars (MR-10) and Workshop on Advanced Characterization Techniques, 6th-8th May 2010.
[14]  Sandeep Kumar, Bhabani K. Satapathy, Amar Patnaik, Analysis of influencing variables for solid particle erosion wear of aramid fiber reinforced vinyl ester resin composites, National Conference on Advances in Polymer Science and Technology (APST-2010)" 22-24 October 2010
[15]  Anu Gupta, Amar Patnaik, Ajit Kumar, Bamboo-based Polymer Composites for Enhanced Mechanical Strength Applications, National Conference on Advances in Polymer Science and Technology (APST-2010)" 22-24 October 2010
[16]  T. G. Mamta, Amar Pataik, Solid particle erosion wear behaviour of alumina particle filled Za-2 alloy metal matrix composite, National Conference on Advances in Polymer Science and Technology (APST-2010)" 22-24 October 2010
[17]  Tej Singh, Bhabani K. Satapathy and Amar Patnaik, Synergistic effect of lapinus and Kevlar fiber for friction applications, National Conference on Advances in Polymer Science and Technology (APST-2010)" 22-24 October 2010
[18]  Ritesh Kaundal, Amar Patnaik, Alok Satapathy, Solid Particle Erosion of SiC filled Short Glass Fiber Reinforced Polyester Resin Composites, National Conference on Advances in Polymer Science and Technology (APST-2010)" 22-24 October 2010.
[19]  Sachin Tejyan, Amit Rawal, Amar Patnaik, Erosion Wear Behavior of Needlepunched Nonwoven Polymer Composites: Effect of impingement angle and impact velocity, The 39th Textile Research Symposium at Department of Textile Technology IIT Delhi, December 16-18, 2010.
[20]  S.S. Mahapatra and Amar Patnaik, Study on Drilling of Metal Matrix Composites using Taguchi Method, Sixth International Conference on Operations & Quantitative Management (ICOQM-6) IIM-Indor, 2005.
[21]  S.S. Mahapatra and Amar Patnaik, Parametric Analysis and Optimization of Cutting Parameters for Turning Operations based on Taguchi Method, International Conference on Global Manufacturing and Innovation (GMI), Coimbatore, 2006.
[22]  S.S. Mahapatra and Amar Patnaik, Optimization of Cutting Parameters for Turning Operations based on Taguchi Method International Conference on Operations & Quantitative Management (ICOQM-7) Jaipur, 2006.
[23]  Amar Patnaik, S.S. Mahapatra, Alok Satapathy and R.R.Dash, A Study on Erosion Behaviour of Glass-Fiber Reinforced Polyester, Fourth AIMS International Conference on Management (AIMS4) IIM-Indor, 2006.
[24]  Amar Patnaik, S.S.Mahapatra, Alok Satapathy, S.N.Mahendra and R.R.Dash, (2007), Implementation of Taguchi Method for Tribo-Performance of Hybrid Composites, Eighth International Conference on Operations and Quantitative Management (ICOQM-8) October 17-20, Assumption University, Bangkok, Thailand.
[25]  Amar Patnaik, S.S.Mahapatra, Alok Satapathy, S.N.Mahendra and R.R.Dash, A Study on Erosion Behaviour of Glass-Fiber Reinforced Polyester composites using Taguchi Mehod, 2nd International Conference on Recent Advances in Composite Materials, BHU-Varanasi, 2007.
[26]  Amar Patnaik, V. Ananda Rao, Alok Satapathy, S.S.Mahapatra, Tribo-Performance of Silicon Carbide Filled Glass-Polyester Composites, International and INCCOM-6 Conference On Future Trends in Composite Materials and Processing, Indian Institute of Technology, Kanpur, India, 2007, December 12-14.
[27]  Amar Patnaik, Alok Satapathy, Analysis of Sliding Wear Behaviour of Pine-bark Reinforced Cement-By-Pass-Dust, Sixth AIMS International Conference on Management (AIMS-6), Indian Business Academy, Greater Noida, Delhi, India, 2008, December 28-31.
[28]  Amar Patnaik, Alok Satapathy, Wear Behaviour of Pine Bark Reinforced Cement By-Pass Dust Filled Polyester Composites, PPS-25, Goa, India, March 1-5, 2009.
[29]  Amar Patnaik, Alok Satapathy and Sandhyarani Biswas, "Abrasive wear performance of glass fiber reinforced polymer matrix composites" International Conference on Technology and Business Management (ICTBM), Al Ghurair University, Dubai, 2009, March 29-April 1.
[30]  Amar Patnaik, Alok Satapathy and Sandhyarani Biswas, Effect of particulate fillers on erosion wear of glass polyester composites: A comparative study using optimization technique, 4th Asian Particle Technology Symposium (APT), Sept 14-16, 2009.
[31]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, Solid particle erosion characteristics of sic filled glass fiber reinforced epoxy based hybrid composites, 4th Asian Particle Technology Symposium (APT ), Sept 14-16, 2009.
[32]  Sandeep Kumar, Bhabani K. Satapathy, Amar Patnaik, Kevlar fiber reinforced vinyl ester resin composites: a study on erosion mode of wear, International Conference on Advancements in Polymeric Materials APM-2010, Trends & Technology, February 20-22, 2010, CIPET, Bhubaneswar.
[33]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, A comparative study on erosion wear behavior of copper slag filled bamboo-epoxy and glass-epoxy composites, International Conference on Advancements in Polymeric Materials APM-2010, Trends & Technology, February 20-22, 2010, CIPET, Bhubaneswar.
[34]  Sisir Mantry, Alok Satapathy, Alok Kumar Jha, S.K. Singh, Amar Patnaik, Preparation, Characterization and Erosion Response of Jute-Epoxy Composites Reinforced with SiC Derived from Rice Husk, International Conference on Advancements in Polymeric Materials APM-2010, Trends & Technology, February 20-22, 2010, CIPET, Bhubaneswar.
[35]  Amar Patnaik, Ritesh Kaundal, Alok Satapathy, Sandhyarani Biswas, Pradeep Kumar, Solid Particle Erosion behavior of Short Glass Fiber Reinforced Polyester Resin Composites: A comparative study, Second International Conference on Natural Polymers & Biomaterials (ICNP-2010) September 24, 25 & 26, 2010, Kottayam, Kerala, India.
[36]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, Erosion Wear Behaviour of Bamboo Fibre Reinforced Epoxy Composites Filled with Alumina Particulate Second International Conference on Natural Polymers & Biomaterials (ICNP-2010) September 24, 25 & 26, 2010, Kottayam, Kerala, India.
[37]  Amar Patnaik, Ritesh Kaundal, Alok Satapathy, Sandhyarani Biswas, and Pradeep Kumar, Solid Particle Erosion of particulate filled Short Glass Fiber Reinforced Polyester Resin Composites, The third International conference on Multi-Functional Materials and Structures (MFMS-2010), September 14-18, 2010/Jeonju, Korea.
[38]  Sandhyarani Biswas, Alok Satapathy, Amar Patnaik, Effect of Ceramic Fillers on Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites: A Comparative Study, The third International conference on Multi-Functional Materials and Structures (MFMS-2010), September 14-18, 2010/Jeonju, Korea.
[39]  Pradeep Kumar A.K.Redhewal, Amar patnaik, Mukesh kumar, To study stress convergence of finite element model using three node triangular, four and eight node rectangular elements and its choice for different application, International Conference on Sunrising Technologies (ICOST 2011) S. S. V. P. S's B. S. Deore College of Engineering, Dhule (M.S.) INDIA, January 14th-15th, 2011.
[40]  Mamatha T.G, Amar Patnaik, Solid Particle Erosion wear behavior of TiO2 Particulate filled ZA-27alloy Metal Matrix Composites, International Conference on Advance Materials, Manufacturing, Management & Thermal Sciences-2010, Nov 18th and 19th 2010, Siddaganga Institute of Technology.
[41]  Amar Patnaik, Sandhyarani Biswas, Damage assessment and validated of Solid Particle Erosion behavior of Short Glass Fiber Reinforced Polyester Resin Composites: A comparative study, 11th Annual UNESCO/IUPAC Workshop and Conference on Functional Polymeric Materials & Composites, 26th to 29th April 2011 at Stellenbosch, South Africa.

Publications: Books/Book Chapters

[1]  Amar Patnaik, Sandhyarani Biswas, Silicon carbide filled polymer composite for erosive environment application: A comparative analysis of experimental and FE simulation results, INTECH Open Access Publisher, "Silicon Carbide", ISBN: 978-953-307-348-4 (Accepted).
[2]  Sandhyarani Biswas, Amar Patnaik, Damage Assessment of Short Glass Fiber Reinforced Polyester Composites: A comparative Study, INTECH Open Access Publisher, "Composite Materials/Book 4", ISBN: 978-953-307-1100-7 (Accepted).