International Journal of Materials and Chemistry

International Journal of Materials and Chemistry is a peer-reviewed international journal that publishes high impact work on the chemistry of novel materials. It covers the chemistry of materials in all forms, particularly materials associated with new technologies. Coverage is broad and includes the design and synthesis of materials, their characterization, processing, modeling, properties and applications.

Rodrigo Leonardo de Oliveira Basso

Editorial Board Member of International Journal of Materials and Chemistry

Professor, Caxias do Sul University, Brazil

Research Areas

Materials Science, Surface Science, Corrosion Science

Education

2008-2009PostdoctorateUniversidade de Caxias do Sul, UCS, Caxias Do Sul, Brazil
2007-2008PostdoctorateUniversidade Estadual de Campinas, UNICAMP, Campinas, Brazil
2003-2007Ph.DUniversidade Estadual de Campinas, UNICAMP, Campinas, Brazil
2001-2003MasterPhysics, Universidade Federal de Sao Carlos, UFSCAR, Sao Carlos, Brazil
1996-2000BachelorPhysics, Universidade Estadual de Londrina, UEL, Londrina, Brazil

Experience

2009-presentAdjunct Professor , Caxias do Sul University, UCS, Brazil
2009-presentScanning Electron Microscopy Lab Coordinator, Caxias do Sul University, UCS, Brazil
2008-2009Post doctorate (PNPD-Capes), Caxias do Sul University, UCS, Brazil

Publications: Conferences/Workshops/Symposiums/Journals/Books

[1]  Roman, D., Bernardi, J. C., de Souza, F. S., Spinelli, A., Giacomelli, C., Figueroa, C. A., Baumvol, I. J.R., Basso, R. L.O. Effect of deposition temperature on microstructure and corrosion resistance of ZrN thin films deposited by DC reactive magnetron sputtering. Materials Chemistry and Physics. , v.130, p.147-153, 2011. http://dx.doi.org/10.1016/j.matchemphys.2011.06.013
[2]  Rovani, A.C., Crespi, A.E., Sonda, V., Cemin, F., Echeverrigaray, F.G., Amorim, C.L.G., Basso, R.L.O., Baumvol, I.J.R., Figueroa, C.A. Plasma post-oxidation mechanisms of nitrided ferrous alloys. Surface & Coatings Technology. , v.205, p.3422-3428, 2011. http://dx.doi.org/10.1016/j.surfcoat.2010.12.006
[3]  Roman, D., Bernardi, J. C., Amorim, C. L. G., Figueroa, C. A., Baumvol, I. J., Basso, R. L. O. SÍNTESE E CARACTERIZAÇÃO DE FILMES FINOS DE ZrN DEPOSITADOS EM DIFERENTES TEMPERATURAS Tecnologia em Metalurgia e Materiais (São Paulo. Impresso). , v.8, p.174-178, 2011. http://dx.doi.org/10.4322/tmm.2011.027
[4]  Rovani, A.C., Fischer, R.R., Cemin, F., Echeverrigaray, F.G., Basso, R.L.O., Amorim, C.L.G., Soares, G.V., Baumvol, I.J.R., Figueroa, C.A. Effect of hydrogen on plasma post-oxidation of ferrous alloys. Scripta Materialia (Oxford). , v.62, p.863-866, 2010. http://dx.doi.org/10.1016/j.scriptamat.2010.02.024
[5]  Cemin, Felipe, Echeverrigaray, Fernando G., Rovani, Ane C., Baumvol, Israel J.R., BASSO, R. L. O., Figueroa, Carlos A. Influence of atomic and mechanical attrition on low temperature plasma nitriding of ferrous alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing. , v.527, p.3206-3209, 2010. http://dx.doi.org/10.1016/j.msea.2010.02.012
[6]  Basso, Rodrigo L.O., Pastore, Heloise O., Schmidt, Vanessa, Baumvol, Israel J.R., Abarca, Silvia A.C., de Souza, Fernando S., Spinelli, Almir, Figueroa, Carlos A., Giacomelli, Cristiano. Microstructure and corrosion behaviour of pulsed plasma-nitrided AISI H13 tool steel. Corrosion Science. , v.52, p.3133-3139, 2010. http://dx.doi.org/10.1016/j.corsci.2010.05.036
[7]  de Souza, S.D., Olzon-Dionysio, M., Basso, R.L.O., de Souza, S. Mössbauer spectroscopy study on the corrosion resistance of plasma nitrided ASTM F138 stainless steel in chloride solution Materials Characterization. , v.61, p.992-999, 2010. http://dx.doi.org/10.1016/j.matchar.2010.06.015
[8]  Leite, M.V., Figueroa, C.A., Gallo, S. Corujeira, Rovani, A.C., Basso, R.L.O., Mei, P.R., Baumvol, I.J.R., Sinatora, A. Wear mechanisms and microstructure of pulsed plasma nitrided AISI H13 tool steel Wear (Lausanne). , v.269, p.466-472, 2010. http://dx.doi.org/10.1016/j.wear.2010.04.037
[9]  Sinatora, A., Leite, M. V., Figueroa, C. A., Baumvol, I. J. R., Basso, R. L. O., Mei, P. R. Desgaste e atrito da camada nitretada do aço ABNT H13 nitretado por plasma. Tecnologia em Metalurgia e Materiais. , v.6, p.67-72, 2009. http://dx.doi.org/10.4322/tmm.00602001
[10]  Basso, R. L. O., Candal, R, Figueroa, C, Wisnivesky, D, Alvarez, F. Influence of microstructure on the corrosion behavior of nitrocarburized AISI H13 tool steel obtained by pulsed DC plasma. Surface & Coatings Technology. , v.203, p.1293-1297, 2009. http://dx.doi.org/10.1016/j.surfcoat.2008.10.006
[11]  Basso, R. L. O., Pimentel, V. L., Weber, S., Marcos, G., Czerwiek, T., Baumvol, I. J., Figueroa, C. A. Magnetic and structural properties of ion nitrided stainless steel. Journal of Applied Physics. , v.105, p.124914-1-12414-5, 2009. http://link.aip.org/link/doi/10.1063/1.3153945
[12]  Olzon-Dionysio, M., Souza, S. D. de, Basso, R. L. O., de Souza, S. Application of Mössbauer spectroscopy to the study of corrosion resistance in NaCl solution of plasma nitrided AISI 316L stainless steel. Surface & Coatings Technology. , v.202, p.3607-3614, 2008. http://dx.doi.org/10.1016/j.surfcoat.2007.12.040
[13]  Basso, R. L. O., Figueroa, C. A., Zagonel, L. F., Pastore, H. O., Wisnivesky, D., Alvarez, F. Effect of Carbon on the Compound Layer Properties of AISI H13 Tool Steel in Pulsed Plasma Nitrocarburizing Plasma Processes and Polymers (Print). , v.4S1, p.S728-S731, 2007. http://dx.doi.org/10.1002/ppap.200731806
[14]  Zagonel, L. F., Basso, R. L. O., Alvarez, F. Precipitates Temperature Dependence in Ion Beam Nitrited AISI H13 Tool Steel Plasma Processes and Polymers (Print). , v.4S1, p.S736-S740, 2007. http://dx.doi.org/10.1002/ppap.200731808