International Journal of Metallurgical Engineering

International Journal of Metallurgical Engineering publishes papers dealing with both applied and theoretical aspects of extractive and process metallurgy and mineral processing. It emphasizes research germane to specific industrial processes and research that examines economic and environmental issues as well as basic engineering technology.

Minea Alina Adriana

Editor-in-Chief of International Journal of Metallurgical Engineering

Associate Professor, Technical University Gh. Asachi Iasi, Romania

Research Areas

Energy Efficiency, Heat Transfer Enhancement, Furnaces, Heat Exchangers

Education

1994-2000Ph.DTechnical University Gh. Asachi Iasi, Iasi (Romania)
1994-1995MasterSurface engineering, Technical University Gh. Asachi Iasi (high education), Iasi (Romania)

Experience

1998-presentTechnical University Gh Asachi Iasi, Bd. D. Mangeron 63, IASI (Romania)
1995-1998INTEC SA, Iasi (Romania)

Academic Achievement

PROCEDEU DE EFICIENTIZARE A PROCESELOR DE TRANSFER TERMIC IN CADRULM

Membership

Member in Different Committees for Doctoral School of Technical University of Iasi

Publications: Journals

[1]  A A Minea, O. Manca, Technology research, development and deployment: Needs and trends on process heating, Metalurgia International vol XVI, no.1, ISSN 1582-2214, pp. 77-82, 2011
[2]  Antonio Di Micco, Francesco Fortunato, Oronzio Manca, A. A. Minea, Daniele Ricci, Numerical Analysis of a Two-Dimensional Thermal Model for a Car Under-Body, International Review of Mechanical Engineering , IREME, Praise Worthy Publishing, vol. 5, no. 2, ISSN 1970-8734, pp.123-127, 2011
[3]  V. Bianco, O. Manca, S. Nardini, A. A. Minea, Analysis and forecasting of nonresidential electricity consumption in Romania, Applied Energy, Elsevier, DOI:10.1016/j.apenergy.2010.05.018, ISSN 0306-2619, 2010
[4]  A A Minea, Simulation of Heat Transfer Processes in an Unconventional Furnace, Journal of Engineering Thermophysics, Vol. 19, No. 4, Pleiades Publishing, ISSN 1810-2328, DOI: 10.1134/S1810232810010017, pp. 31-38, 2010
[5]  A A Minea, An Experimental Method to Decrease Heating Time in a Commercial Experimental Heat Transfer, Taylor and Francis, Vol. 23, No 3, pp. 175 — 184, http://dx.doi.org/10.1080/08916150903399714, ISSN 0891-6152, 2010
[6]  A. A. Minea, A study on energy consumption in Romania, Environmental Engineering and Management Journal, "Gh. Asachi" Technical University of Iasi, ISSN: 1582-9596, vol. 9, nr. 4, p. 581-587, 2010
[7]  N. Bianco, O. Manca, A. A. Minea, V. Naso, D. Ricci, Numerical model for back treatment of ultilayer thin films by a moving laser source, International Review of Mechanical Engineering , IREME, Praise Worthy Publishing, vol. 4, no. 2, ISSN 1970-8734, pp.123-127, 2010
[8]  O. Manca, A. A. Minea, S. Nardini, S. Tamburrino, Transient heat conduction in solides irradiated by a moving heat source with combined donutand Gaussian distribution, International Review of Mechanical Engineering , IREME, Praise Worthy Publishing, vol. 4, no.2, ISSN 1970-8734, pp.123-127, 2010
[9]  A A Minea, A Mach number simulation study on a regular furnace, Metalurgia International vol XV, no.8, ISSN 1582-2214, pp. 10-15, 2010
[10]  A A Minea, Studies on Mach number variation on a modified heated enclosure, Metalurgia International vol XV, no.5, ISSN 1582-2214, pp. 38-44, 2010
[11]  A A Minea, Simulation of Heat Transfer Processes in an Unconventional Furnace, Journal of Engineering Thermophysics, Vol. 19, No. 1, Pleiades Publishing, ISSN 1810-2328, DOI: 10.1134/S1810232810010017, pp. 31-38, 2010
[12]  A A Minea, A study on decreasing global energy consumptions: solar energy, Metalurgia International vol XV, no.2, ISSN 1582-2214, pp. 75-80, 2010
[13]  A A Minea, Active techniques for improving heat transfer, Metalurgia International vol XIV, no.7 special issue, ISSN 1582-2214, pp. 62-65, 2009
[14]  A A Minea, O Manca, Techniques for intensifying heat transfer: from basics to nanofluids, Metalurgia International vol XIV, no.12, ISSN 1582-2214, pp. 54-61, 2009
[15]  A A Minea, Studies on a cost-efficient technique for increasing furnaces energy efficiency. environmental aspects, Metalurgia International vol XIV, no.10 special issue, ISSN 1582-2214, pp. 57-61, 2009
[16]  A. A. Minea, CFD Study On Heat Transfer In A Muffle Furnace, International Review of Mechanical Engineering , IREME, Praise Worthy Publishing, ISSN 1970-8734, pp.319-325, 2009
[17]  A. A. Minea, Experimental technique for saving energy in oval furnaces, Environmental Engineering and Management Journal, "Gh. Asachi" Technical University of Iasi, ISSN: 1582-9596, vol. 8, nr. 3, p. 463-468, 2009
[18]  N. Bianco, O. Manca, A.A. Minea, V. Naso, Numerical Study of the quasi steady state temperature field by a moving heat source for surface heat treating, REVISTA METALURGIA (9): pag.5-11, ISSN 0461-9579, 2009
[19]  A. A. Minea, A. Dima, Analytical approach to estimate the air flow rate in the boundary layer of a heated furnace wall, Environmental Engineering and Management Journal, "Gh. Asachi" Technical University of Iasi, ISSN: 1582-9596, vol. 7, nr. 3, p. 329-335, 2008
[20]  A. Dima, A.A. Minea, Reducing oxide layer on AlCu2,5Mg treated parts through improving heat transfer, REVISTA METALURGIA INTERNATIONAL vol. XIII(10): pag. 5-8, ISSN 1582-2214, 2008
[21]  A. A. Minea, A. Dima, CFD simulation in an oval furnace with variable radiation panels, Revista Metalurgia International vol. XIII(10): pag. 9-14, ISSN 1582-2214, 2008
[22]  A. Dima, A.A. Minea, Studies on heat treatment of an AlCu4Mg1 alloy, Environmental Engineering and Management Journal, "Gh. Asachi" Technical University of Iasi, ISSN: 1582-9596, vol. 7, nr. 4, pag 439-442, 2008
[23]  A. A. Minea, A. Dima, Saving energy through improving convection in a muffle furnace, Thermal Science Journal, vol. 12 (3),pp.121-125, ISSN 0354-9836, 2008
[24]  . A. Minea, Theoretical studies on forced convection in a variety of configurations , Rev Metalurgia International, vol. XIII, nr.1, Bucuresti, pp. 11-17, ISSN 1582-2214, 2008
[25]  A. A. Minea, Experimental technique for increasing heating rate in oval furnaces, Rev Metalurgia International, vol. XIII, nr.4, Bucuresti, pp. 31-35, ISSN 1582-2214, 2008
[26]  A.A. Minea, A study on improving convection heat transfer in a medium temperature furnace, International Review of Mechanical Engineering , IREME, Praise Worthy Publishing, ISSN 1970-8734, pp.319-325, 2008
[27]  A. A. Minea, Experimental and theoretical investigation of stress variation in AlCu4Mg1 aluminum alloy, Surface Engineering and Applied Electrochemistry, Vol. 44, Number 4/august 2008, pag. 335-338, ISSN 1934-8002, http://dx.doi.org/10.3103/S1068375508040157, 2008
[28]  A.A. Minea, A mathematical approach to estimate air rate in a heating furnace, WSEAS TRANSACTIONS on HEAT and MASS TRANSFER, ISSN: 1790-5079, Issue 3, Volume 3, sept 2008, pp.240-249, 2008
[29]  A.A. Minea, Corelation Between Aluminum Alloys Oxidation And Chamber Geometry Of The Heat Treatment Equipment, International Review of Mechanical Engineering , IREME, Praise Worthy Publishing, ISSN 1970-8734, pp.268-273, 2007
[30]  A.A. Minea, R. Carabet, Studies concerning energetic consumption of some heating equipments with resistors, The Annals Of "DUNAREA DE JOS" University Of Galati, Fascicle IX, Metallurgy And Materials Science No. 2-2007, ISSN 1453-083X, pp. 91-96, 2007
[31]  A.A. Minea, I. Sandu, Correlation between aluminum alloys plasticity and heat treating technology, Revista Materiale Plastice, Biblioteca Nationala a Chimiei, nr.4, vol.44, pp.370-373, ISSN 0025-5289, 2007
[32]  A.A. Minea, I. Sandu, Heat treating optimization on an AlCu2,5Mg aluminum alloy, Revista de Chimie, Biblioteca Nationala a Chimiei, iunie, nr.6, vol.57, pp.586-590, ISSN 0034-7752, 2006
[33]  A. A. Minea, Optimizarea functionarii unui cuptor electric cu radiatie, prin schimbarea regimului de circulatie al aerului , Rev Metalurgia (57), nr.3, Bucuresti, pp. 42-47, ISSN 0461-9579, 2005
[34]  A. Dima, A. A. Minea, I. Dima, Researches for the determination of the ATCSi10-Mg alloy fatigue life, function of different applied thermal treatment cycles, Analele Univ. Dunarea de Jos, Galati, anul XXII(XXVIII), Fasc. IX, nr.1, pp. 16-18, ISBN 1453-083X, 2005
[35]  A.A. Minea, A. Dima, Experimental studies on structure profile of cast alluminum alloys, Analele Univ. Dunarea de Jos, Galati, anul XXII(XXVIII), Fasc. IX, nr.1, pp. 66-70, ISBN 1453-083X, 2005
[36]  A.A. Minea, O. Minea, P. Dumitrash, Studies about AlCu2Mg1,5Ni behavior at heat treatment, Elektronaia obrabotka materialov, Revista Academiei de Stiinte a Moldovei, Republica Moldova, no.6, pp.82-84, ISSN 0013-5739, 2003
[37]  A.A. Minea, A. Dima, Influence of the heating process on aluminum aloys failure, Materials Engineering, Italia, vol. 13, n.2, pp. 187-190, ISSN 1120-7302, 2002
[38]  A. Dima, A.A. Minea, Theoretical contributions regarding atmosphere circulation in a radiative furnace, Materials Engineering, Italia, vol. 13, n.3, pp.265-267 , ISSN 1120-7302, 2002
[39]  A.A. Minea, A. Dima, A critical analysis of intensifying the heat transfer processes, Buletinul I P Iasi, Sectia SIM, Fasc 1-2, Tomul LIV(LVIII), pp.65-72, ISSN 1453-1690, 2008.
[40]  A. A. Minea, Theoretical studies on elutriation of particles from fluidized beds, Buletinul I P Iasi, Sectia SIM, Fasc 4, Tomul LIII(LVII),. pp. 155-161, ISSN 1453-1690, 2007
[41]  A. Dima, A. A. Minea, M. Dima, A sustainable industrial development of material science and engineering, Buletinul I P Iasi, Sectia SIM, Fasc, Tomul LIII(LVII), pp. 269-274, ISSN 1453-1690, 2007.
[42]  A.Dima, A.A. Minea, Sustainable industrial development, the only way for European integration of Romania, Buletinul I P Iasi, tomul LII (LVI), Fasc. 2, Sectia SIM, Iasi, pp. 91-94, ISSN 1453-1690, 2006
[43]  CO Burcea, A.A. Minea, M. I. Dima, Mohamed Abugassaissa, Aspects regarding micro alied steels behavior at hot forging, Buletinul I P Iasi, tomul LII (LVI), Fasc. 2, Sectia SIM, Iasi, pp. 95-98, ISSN 1453-1690, 2006
[44]  A.Dima, A.A. Minea, Mohamed Abugassaissa, Materials science and engineering, an important area of a sustainable development, Buletinul I P Iasi, tomul LII (LVI), Fasc. 2, Sectia SIM, Iasi, pp. 99-102, ISSN 1453-1690, 2006.
[45]  I. Sandu, A. A. Minea, EPISCON (european phd in science for conservation) an inter-university school model, Buletinul institutului politehnic iasi, Tomul LII (LVI), fasc. 5, StiinŃe socio-umane, pp. 558-564, ISSN 1453-1690, 2006
[46]  A. Dima, A.A.Minea, I.M. Dima, Heat process optimization in industrial furnaces, Buletinul I P Iasi, Sectia SIM,Tomul LI(LVI), Fasc.1, pp. 113-116, ISSN 1453-1690, 2006
[47]  A. Dima, I.M. Dima , A.A.Minea, Studies concerning the enhancing of the mechanical characteristics of the aluminum cast alloys by heat treatments, Buletinul I P Iasi, Sectia SIM,Tomul LI(LVI), Fasc.1, pp. 17-120, ISSN 1453-1690, 2006
[48]  M. Alexandru, G. Badarau, P. Vizureanu, A.A.Minea, R. Manea, C. Alexandru, Modernization trends in the cold rolling of the rail guard profile type A, Buletinul I P Iasi, Sectia SIM,Tomul LI(LVI), Fasc.1, pp. 21-25, ISSN 1453-1690, 2006
[49]  A. A. Minea, A. Dima, Heat treating optimization on aluminum alloys, Optimum technologies, technologic systems and materials in the machines building field, Academia Româna, Filiala Iasi, TSTM 11, NO.2, p. 262-267, ISSN 1224-7499, 2005
[50]  A. Dima, M. Alexandru, A. A. Minea, I. Dima, Theoretical and experimental researches considering the optimum determination of the cold-roll strength, Optimum technologies, technologic systems and materials in the machines building field, Academia Româna, Filiala Iasi, TSTM 11, no.2, p. 274-278, ISSN 1224-7499, 2005
[51]  A. A. Minea, Mechanical properties optimisation of an AlCu4Mg1 alloy, Buletinul I P Iasi, Sectia SIM, pp. 139-144, ISSN 1453-1690, 2005
[52]  A.Dima, A.A. Minea, M. I. Dima, Durable development-way to progress, welfare and european integration, Buletinul I P Iasi, tomul L (LIV), Fasc. 3-4, Sectia SIM, Iasi, pp. 23-27, ISSN 1453-1690 , 2004
[53]  A.A. Minea, A. Dima, Some aspects about saving energy in a medium temperature furnace, Buletinul I P Iasi, tomul L (LIV), Fasc. 3-4, Sectia SIM, Iasi, ISSN 1453-1690, 2004
[54]  A.A. Minea, Studies regarding the ecologycal impact of fuels burning process, Buletinul I P Iasi, tomul L (LIV), Fasc. 3-4, Sectia SIM, Iasi, pp. 43-47, ISSN 1453-1690, 2004
[55]  A. A. Minea, A. Dima, Theoretical contributions in describing the hardness variation of an Al-Cu-Mg alloy, Buletinul I P Iasi, tomul XLIX(LIII),Fasc 1-4, Sectia SIM, p. 31-34, ISSN 1453-1690, 2003
[56]  A.A. Minea, O. Minea, Contributions concerning an Al-Cu-Mg alloy behavior after heat treatment, Buletinul I P Iasi, tomul XLIX(LIII), Fasc. 1-4, Sectia SIM, p. 35-41, ISSN 1453-1690, 2003
[57]  M. Susan, A. A. Minea, V. Catarschi, M.R. Susan, Theoretical and experimental study regarding ultrasonic vibration drawing of the thin wall pipes-UVD, Buletinul I P Iasi, tomul XLIX(LIII), Fasc. 1-4, Sectia SIM,p. 135-143, ISSN 1453-1690, 2003
[58]  A. A. Minea, O. Minea, Studies about heating process in an industrial furnace (II), Buletinul I P Iasi, tomul XLVIII(LII), fasc. 1-2, p. 29-32, ISSN 1453-1690, 2002
[59]  A. A. Minea, Studies about heating process in an industrial furnace (I), Buletinul I P Iasi, tomul XLVII(LI), fasc. 1-2, p. 49-52, ISSN 1453-1690, 2001
[60]  A. Dima, A. A. Minea, Metalurgical implications on heat treatment of aluminum alloys in electrical furnaces, Optimum technologies, technologic systems and materials in the machines building field, Academia Româna, Filiala Iasi, TSTM 6, p. 237-240, ISSN 1224-7499, 2000
[61]  A. A. Minea, I. Carcea, P. Vizureanu, Studies concerning the medium temperature oxidation of the aluminum alloys , Optimum technologies, technologic systems and materials in the machines building field, Academia Româna, Filiala Iasi, TSTM 6, p. 271-275, ISSN 1224-7499, 2000
[62]  A. A. Minea, O. Minea, Studies concerning the improvement of construction parameters of an electrical furnace, used for medium temperatures, Optimum technologies, technologic systems and materials in the machines building field, Academia Româna, Filiala Iasi, TSTM 6, p. 276-279, ISSN 1224-7499, 2000
[63]  M. Baciu, M. Agop, A. A. Minea, C. Baciu, A Study of Diffusion Creep, Optimum technologies, technologic systems and materials in the machines building field, Academia Româna, Filiala Iasi, TSTM 4, p. 181-183, ISSN 1224-7499, 1999
[64]  M. Baciu, M. Agop, A. A. Minea, C. Baciu, Calculation of the deformation rate during diffusion of crystals having compact hexagonal symmetry, Optimum technologies, technologic systems and materials in the machines building field, Academia Româna, Filiala Iasi, TSTM 4, p. 184-185, ISSN 1224-7499, 1999
[65]  A. A. Minea, Studies concerning the improvement of construction and functioning parameters of aluminum alloys heat treatment furnaces, Modelling and optimization in the machines building field, Academia Româna, Filiala Iasi, MOCM 4, p. 131-136, ISSN 1224-7499, 1999.
[66]  A. A. Minea, Studies about air flow circulation in an industrial furnace, Buletinul I P Iasi, tomul XLV(IL), fasc. 1-2, p. 29-33, ISSN 1453-1690, 1999
[67]  A. A. Minea, O. Minea, Studies concerning the determination of the heat chamber geometry of a medium temperature furnace, Buletinul I P Iasi, tomul XLV(IL), fasc. 1-2, p. 22-29, ISSN 1453-1690, 1999
[68]  O. Minea , A. A. Minea, Studies concerning the improvement of construction and functioning parameters of a medium temperature furnace, Buletinul I P Iasi, tomul XLV(IL), fasc. 1-2, p. 33-39, ISSN 1453-1690, 1999
[69]  A. Dima, P. Vizureanu, A A Minea, Intelligent systems for heat treating equipment, Buletinul I P Iasi, tomul XLIV(XLVIII), fasc. 1-4, p. 67-70, ISSN 1453-1690, 1998
[70]  A. Dima, L. Toth, G. Badarau, A A Minea, P. Vizureanu, Experimental determination of optimum size of austenitic grain by means of the heat treating cycles in laboratory conditions, Buletinul I P Iasi, tomul XLIV(XLVIII), fasc. 1-4, p. 125-133, ISSN 1453-1690, 1998
[71]  C. Baciu, I. Alexandru, M. Baciu, A. A. Minea, I. Sugaru, Reducerea cantitatii de austenita reziduala din structura otelurilor pentru rulmenti prin tratamente termice la temperaturi sub 0°C, Academia Româna, Filiala Iasi, Subcomisia Stiinta Materialelor, ISSN 1224-7499, 1998
[72]  A. Dima, G. Badarau, P. Vizureanu, L. Toth, A.A. Minea, P. Ivanov, M. Stefan, V. Grancea, Some Contributions Brought by the Romanian Science upon the Computer Assisted Design of Technologies and Hot Working Equipment, Romanian Academy, Branch Office of Iasi, Optimum Technologies, Technologic Systems and Materials in the Machine Building Field, TSTM-2, Bacau, pp. 112-117, ISSN 1224-7499, 1996 .
[73]  E. Chirila, A. A. Minea , P. Vizureanu, Experimental researches about the improvement of the electric arc furnaces parameter for the energetical consumptions decreasing, Buletinul I P Iasi, tomul XLII(XLVI), fasc. 3-4 vol.2, p. 545-548, ISSN 1453-1690, 1996
[74]  A A Minea, O Minea, E Chirila, Studies concerning the improvement of the construction and functioning parameters of aluminum alloys heat treatment furnaces, Buletinul I P Iasi, tomul XLII(XLVI), fasc. 3-4 vol.1, p. 15-19, ISSN 1453-1690, 1996
[75]  A. A. Minea, Studies about thermal treatment optimisation for bearing steels, Buletinul I P Iasi, tomul XL(XLIV), fasc. 1-2 vol.1, p. 416-429, ISSN 1453-1690, 1994
[76]  O. Minea, A.A. Minea, Studies about thermal treatment optimisation for casting aluminum alloys, Buletinul I P Iasi, tomul XL(XLIV), fasc. 1-2 vol.1, p. 404-416, ISSN 1453-1690, 1994

Publications: Conferences/Workshops/Symposiums

[1]  A. A. Minea, O. Manca, N. Bianco, Convection versus radiation into furnaces heat transfer enhancement, ASME-ATI-UIT 2010 CONFERENCE on Thermal and Environmental Issues in Energy Systems, Sorrento, Italy, may 2010, ISBN 978-884672659-9, vol. II, pg. 1087-1093
[2]  A. A. Minea , A. Dima, Experimental Studies Concerning Energetic Consumption Of A Classic Furnace, 8th European Conference on Industrial Furnaces and Boilers, INFUB, Portugalia, vol. Unic, ISBN 978-972-99309-3-5, paper no.13. , 2008
[3]  A. A. Minea , A. Dima, Studies On Energetic Consumption Of An Oval Furnace,Croatia Metal 2008, 15 mai, ISBN 978-80-254-1987-8, pp. 135, 2008
[4]  A. A. Minea, Theoretical Approach to Estimate the Air Rate in a Heated Medium Temperature Furnace, WSEAS, The 10th WSEAS International Conference on Mathematical Methods, Computational Techniques And Intelligent Systems (MAMECTIS '08) Corfu, Greece, October 26-28 2008, Paper ID number: 593-249, pp. 119-121, ISBN 978-960-474-012-3, ISSN 1790-2769, 2008 (conferinte cotate ISI)
[5]  A. A. Minea, R. Carabet, Theoretical approach to fluidized bed heat treatment at medium temperatures, Proceedings 10-th National Conference of Metallurgy with international participance, "F.J. CURIE", Varna, BULGARIA, 28-31th May 2007, S24, pp. 1-7, ISBN 978-954-92052-1-3, 2007
[6]  A. A. Minea, Reducing aluminum oxide layer on AlCu2,5Mg treated parts through improving heat transfer in a radiative furnace, vol.unic Euromat, Nurnberg, Germany, 10-13 sept. 2007
[7]  A. A. Minea, Methods to improve and secure combustion processes, Dresda, 38 Kraftwerkstechnisches Kolloquium 2006, 24-25 oct, pp.44-49 , ISBN 3-86005-168-7, 2006
[8]  A. A. Minea, A. Dima, Experimental and theoretical improvement of heat transfer a medium temperature furnace, 7rs European conference on Industrial Furnaces and Boilers, INFUB, Portugalia, vol. Unic, p. 420-428, 2006
[9]  A. A. Minea, Studies on maximizing heat transfer in a medium temperature furnace, 3rd BSME-ASME International Conference on Thermal Engineering, 20-22 December, Dhaka, Bangladesh, BA-165, 2006.
[10]  A. A. Minea, Studies concerning some aluminum aloys properties, A VI-a conferinta internationala "Echipamente pentru controlul si conducerea sistemelor tehnice MCSS-2001, Vinita, Ucraina, 8-12 oct. pp. 220, ISBN 966-641-035-4, 2001
[11]  A. A. Minea, Studies concerning the influence of the heat chamber geometry of a furnace on the medium temperature oxidation of the aluminum alloys, A VI-a conferinta internationala "Echipamente pentru controlul si conducerea sistemelor tehnice MCSS-2001, Vinita, Ucraina, 8-12 oct, pp. 221, ISBN 966-641-035-4, 2001.
[12]  A. Dima, L. Toth, G. Badarau, A. A. Minea, P. Vizureanu, Experimental Researches for optimum determinations of the heat treatment cycles in laboratory conditions, Conferinta "Echipamente pentru controlul si conducerea sistemelor tehnice, Vinita, Ucraina, 1999, tom 3, pp. 316-321, ISBN 966-7199-34-7, 1999.
[13]  A Dima, AAMinea, G. Badarau, P. Vizureanu, Considerations concerning the materials designing, The Eights Israel Materials Engineering Conference, IMEC VIII, vol. Unic, p. 146-148, 1997
[14]  A. Dima, P. Vizureanu. V. Grancea, A. A. Minea, Studies concerning the energetical optimisation by computer of the charge in industrial furnaces, 3rd European Conference Industrial Furnaces and Boilers, Portugalia, vol. Unic, p. 602-611, 1995
[15]  A. A. Minea, O. Minea, L. Toth, A hokezeles hatasa az onteszeti aluminiumotvozetek villamos ellenallasara, 16-th Heat Treatment National Conference, Szekesfehervar, Ungaria, vol. Unic, p. 101-103, 1995
[16]  A. Dima, M. Stefan, A. A. Minea, Heat Treatment for aluminium alloys with a new the decrease of intercristalline corrosion, The 15th International Congress of Thermical Treatments, Dunaujvaros, Hungary, 19-21 oct., p. 226-228, 1993
[17]  A Dima, A A Minea , L Toth, Some aspects of computer aided planning of heating process during heat treatment and hot forming, 5th International Conference, Euromat 1994,, Ungaria, vol.4, p. 1286-1290, 1993
[18]  A Dima, E. Chirila, A A Minea, Computer Design of electric arc furnaces, 7th International Metallurgy and Materials Congress, Turcia, vol.1, p. 107-118, 1993
[19]  A.A. Minea, IG Sandu, R.G.. Stefanica, The impact of simulation techniques on heat transfer enhancement, ConferinŃa ASTR,Iasi, 19-20 nov., ISSN 2066-6586, pp 253-258, 2009
[20]  A.A. Minea, Simulation Of Heat Transfer Improving In An Oval Furnace, Conferinta Progrese în Simularea Echipamentelor si Proceselor Industriale-Solutii Eficiente cu ANSYS & FLUENT, Sinaia, 29-30 mai 2008, volum electronic, 2008.
[21]  A.A. Minea, Modelarea transferului de caldura pentru instalatii de incalzire cu pat fluidizat, GEPROPOL, Bucuresti, 8-9 iunie 2007, pp. 126-133, ISBN 978-973-718-751-2, 2007
[22]  A. Dima, A.A. Minea, IG Sandu, I. Sandu, ImplicaŃiile stiinŃelor ingineresti în conseravrea mostenirii culturale, ConferinŃa ASTR, 2007
[23]  Dima, A. A. Minea, I. DimaA sustainable industrial development of materials science and engineering, Technomus 2007, Suceava, 4-5 mai 2007, 2007
[24]  A. Dima, A. A. Minea, I. Dima, Education supporting easting development, Artcast 2006, 3th International symposion, Galati, 4-5 mai 2006, pg. 163-166, 2006
[25]  A. A. Minea, Metallurgical implications of heat treating of aluminum alloys in electrical furnaces, National conference on metallurgy and materials science, ROMAT 2006, 27-29 sept. Bucuresti, Ed. Printech, pg 311-315, ISBN 978-973-718-534-1, 2006
[26]  A.A. Minea, A. Dima, Microstructural consideration of a heat treated AlCu2,5Mg alloy, International Conference on Materials nScience and Engineering, BRAMAT 2005, Romania, 24-26 februarie, ISBN 973-635-454-7, 2005.
[27]  A. Dima, A. A. Minea, O. Minea, Studii privind duritatea aliajului cu baza aluminiu AlCu4Mg1, Simpozion international "Turnatoria de la rigoarea tehnicii la arta" Galati, Romania, 14-15 mai, pp. 132-137, ISBN 973-8316-43-x, 2004
[28]  A.A. Minea, A. Dima, Comparatie privind microstructura unui aliaj de aluminiu in urma aplicarii unui tratament termic de calire, Simpozion international "Turnatoria de la rigoarea tehnicii la arta" Galati, Romania, 14-15 mai. pp. 124-131, ISBN 973-8316-43-x, 2004
[29]  A.A. Minea, A. Dima, O Minea, Theoretical and experimental studies on an AlCu2Mg1,5Ni aluminum alloy, International conference on advanced materials and technologies, ROMAT 2004, 21-22 octombrie Bucuresti, Ed. Printech, pg 97-102, ISBN 973-718-081-X, 2004.
[30]  A.A. Minea, O. Minea, A. Dima, Experimental and theoretical contributions on hardness profile of an AlCu2Mg1,5Ni alloy, Conferinta cu participare internationala "Tehnologii si materiale avansate" Galati, Romania, 20-22 nov., pp. 187-189, ISBN 973-627-066-1, 2003.
[31]  A.A. Minea, A. Dima, Experimental studies on microstructure profile of an AlCu2Mg1,5Ni alloy, Conferinta cu participare internationala "Tehnologii sI materiale avansate" GalatI, Romania, 20-22 nov. pp. 419-421, ISBN 973-627-066-1, 2003.
[32]  M. Stefan, A. A. Minea, Influenta unor parametri functionali asupra tehnologiilor de încalzire în vid, Buletinul primului colocviu national tehnic interdisciplinar, Braila, 23 aprilie, 1993
[33]  A. Dima, E. Chirila, I. Cucos, A. A. Minea, Invatarea creativa si testele de creativitate ca baze ale creativitatii tehnice, Primul colocviu national tehnic interdisciplinar, Braila, 23 aprilie, 1993
[34]  A. A. Minea, Instalatie pentru determinarea experimentala a pierderilor energetice prin fante la cuptoarele electrice, Sesiunea stiintifica de fizica si chimie "Mijloace de învatamânt de conceptie proprie", Iasi, 15 mai , 1988-lucrare premiata

Publications: Books/Book Chapters

[1]  A. A. Minea, D. G. Galusca, Heat Treatment: Theory, Techniques and Applications, chapter AlCu2,5Mg Alluminum Alloy Heat Treatment: Theory, Techniques and Applications, Nova Publishers, ISBN: 978-1-61728-348-2, pg. 107-139, 2010
[2]  D. G. Galusca, A. A. Minea, Heat Treatment: Theory, Techniques and Applications, chapter Quenching under Fog Conditions: Theory, Technique and Application on Rolling Mills, Nova Publishers, ISBN: 978-1-61728-348-2, pg. 79-106, 2010
[3]  A. A. Minea, Tehnici de simulare a proceselor termogazodinamice-277 pag. (47rd/pag), Ed. Matrix Rom Bucuresti, ISBN 978-973-755-603-5, 2010
[4]  A. A. Minea, Transfer de căldură si masă-notiŃe de curs si aplicaŃii-262 pag. (28rd/pag), Ed. Pim, Iasi, ISBN 606-520-835-3, 2010
[5]  A. A. Minea Engineering heat and mass transfer, 210 pag, (42 rd/pag) Ed. Praise Worthy Praise, Italy, ISBN 978-88-96329-01-6, 2009
[6]  A. A. Minea Techniques for studying heat and mass transfer enhancement, 243 pag, (29rd/pag) Ed. VDM Publishing House, Germany, ISBN 978-3—639-17191-4, 2009
[7]  A. A. Minea, Tehnici de studiu a intensificării proceselor de transfer de căldură si masă-229 pag. (32rd/pag), Ed. Politehnium, Iasi, ISBN 978-973-621-213-0, 2008
[8]  A. A. Minea,Cuptoare si instalatii de incalzire, Indrumar de proiectare-98 pag.(28rd/pag) , Ed. Cermi, Iasi, ISBN 978-973-667-219-4, 2007
[9]  A. A. Minea, Transfer de caldura si masa-104 pg.(31rd/pag), Ed. Cermi, Iasi, ISBN 978-973-667-220-0, 2007
[10]  A. A. Minea, Transfer de masa si energie. Aplicatii in stiinta si ingineria materialelor-154 pag.(30rd/pag), Ed.Tehnopres, Iasi, ISBN 973-8048-21-4, 2006
[11]  A. A. Minea, Aliaje de aluminiu. Tratamente termice si echipamente de incalzire specifice-263 pag(28rd/pag), Ed. Cermi, Iasi, ISBN (10) 973-667-205-0, 2006
[12]  A. Nicolae, C. Predescu, M. Nicolae, A. Vasiliu, P. Vizureanu, A.A. Minea, OperaŃionalizarea conceptului DD în siderurgie, 375pg(36 rd/pag), Ed. Printech, ISBN 973-718-562-5. , 2006
[13]  A. A. Minea , A.Dima, Transfer de masa si energie-294 pag.(30rd/pag), Ed.Tehnica, Stiintifica si didactica Cermi, Iasi, ISBN 973-667-115-1, 2005
[14]  A. Dima, A. A. Minea, Cuptoare si instalatii de incalzire-Particularitati constructiv-functionale-229 pag.(30rd/pag), Ed. Cermi, Iasi, ISBN 973-667-114-3, 2005
[15]  A. A. Minea, Transfer de caldura si instalatii termice-231 pag.(30rd/pag), Ed.Tehnica, Stiintifica si didactica Cermi, Iasi, ISBN 973-8188-63-6, 2003
[16]  Gh. Badarau, A. A. Minea , M. Stefan, Proprietatile materialelor metalice-269 pag. (38rd/pag), Ed. "Gh. Asachi", Iasi, 973-621-018-9, 2003
[17]  A. Florescu, I. Malureanu, R. Comaneci, R. Danila, V. Moldovan, C. Bejinariu, O. Calancia, D. Gheorghiu, A. A. Minea, Stiinta si tehnologia materialelor-indrumar pentru lucrari de laborator-155pag.(37rd/pag), Rotaprint, Iasi, 2000
[18]  A. A. Minea, O. Minea, Metode de protectie si tratamente termice-263 pag. (29 rd/pag), Ed. Cermi, Iasi, ISBN 973-9378-82-x, 1999
[19]  R. Danila, A. Florescu, A. A. Minea, O. Calancia, Prelucrarea mecanica a semifabricatelor turnate-150 pag. (42 rd/pag), Ed. Cermi, Iasi, ISBN 973-98371-0-7, 1997
[20]  A. Dima, R. Popescu, P. Vizureanu, A. A. Minea, Cuptoare si instalatii de incalzire, vol. 2-Elemente de proiectare asistata de calculator a cuptoarelor cu combustie-184 pag.(29rd/pag), Ed. Sedcom Libris, Iasi, ISBN 973-9818714, 1997
[21]  I. Malureanu, A. Florescu, R. Comaneci, R. Danila, V. Moldovan, C. Bejinariu, O. Calancia, D. Gheorghiu, A. A. Minea, Stiinta si tehnologia materialelor, vol.3-156 pag.(37rd/pag), Ed. Cermi, Iasi, ISBN, 1997