[1] | Anusha A. V. N. L. and A. Seshagiri Rao, Design and analysis of IMC based PID controller design for unstable systems for enhanced closed loop performance, Submitted to IFAC conference on Advances in PID control, March 27-29, 2012, Italy. |
[2] | M. Venkatesh, M. Chidambaram and A. Seshagiri Rao, Robust design of Smith predictor for a delay margin based on sensitivity, The 5th International Symposium Design, Operation and Control of Chemical Processes (PSE-ASIA), July 25-28, 2010, Singapore. |
[3] | A. Seshagiri Rao, V. S. R. Rao and M. Chidambaram, Direct synthesis based controller design for TITO time delay processes in Smith predictor configuration, 11th Asia Pacific Confederation of Chemical Engineering (APCChE), August 27 – 30, 2006, Kuala Lumpur, Malaysia. |
[4] | B. Vanavil and A. Seshagiri Rao, Improving the performance with PID filter controllers for unstable time delay processes, IEEE conference on Process Automation, Control and Computing (PACC), July 20-22, 2011, Coimbatore. |
[5] | S. Uma and A. Seshagiri Rao, Modified Smith predictor design for non-self regulating time delay processes with periodic disturbances, IIChE Chemical Engineering Congress (CHEMCON), December 27-30, 2010, Chidambaram, Tamilnadu. |
[6] | S. Uma and A. Seshagiri Rao, Parallel cascade control strategy for non self regulating processes with time delays, IIChE Chemical Engineering Congress (CHEMCON) 2009, December 27-30, 2009, Visakhapatnam. |
[7] | Harshitha Loke, R. Rakesh and A. Seshagiri Rao, Enhanced control of unstable time delay processes using PID filter controllers, IIChE Chemical Engineering Congress (CHEMCON) 2009, December 27-30, 2009, Visakhapatnam. |
[8] | S. Uma and A. Seshagiri Rao, Modified Smith predictor for integrating processes with time delay, Trends in Industrial Measurements & Automation (TIMA), January 4-6, 2009, Chennai. |
[9] | S. Uma and A. Seshagiri Rao, Enhanced control of unstable cascade processes with time delays using modified Smith predictor, IIChE Chemical Engineering Congress (CHEMCON), December 27-30, 2008, Chandigarh. |
[10] | A. Seshagiri Rao and M. Chidambaram, Delay compensator for unstable systems with a large dead time, Trends in Industrial Measurements & Automation (TIMA), 2004, Chennai. |
[11] | A. Seshagiri Rao and R. K. Jha, Smith predictor combined with cascade control for dead time compensation, IIChE Chemical Engineering Congress (CHEMCON), 2002, Hyderabad. |
[12] | B. Vanavil, M. Hari Kumar and A. Seshagiri Rao, Bifurcation analysis of a two stage bioreactors with recycle, Trends in Biotechnology, February 24, 2012, SRM College, Chennai. |
[13] | Gajanan Choudary and A. Seshagiri Rao, Dynamic behavior of activated sludge process for waste water treatment, To present at National conference on Modeling and Computer Simulation, March 25-27, 2011, IT-BHU, Varanasi. |
[14] | N. Balaraju and A. Seshagiri Rao, Steady state and dynamic analysis of activated sludge process, Young Researchers Conference and Young Innovators Choice Competition (YRC-2010), Institute of Chemical Technology, January 15, 2010, UICT, Mumbai. |
[15] | S. Uma and A. Seshagiri Rao, Parallel cascade control of an unstable continuous bioreactor, CHEMFERENCE, August 22-23, 2009, IIT Madras, Chennai. |
[16] | Rajesh Ammathil and A. Seshagiri Rao, Smith predictor for MIMO non-square processes with multiple time delays, National Symposium on Instrumentation, December 8-10, 2008, Visakhapatnam. |
[17] | Prasad, C. S., A. Seshagiri Rao, C. Noorul Huq and M. Chidambaram, Genetic algorithm optimization for boiler turbine control system design, National conference on Emerging Trends in Instrumentation and Communication Technologies (ETICT), March 16-17, 2006, Madurai. |
[18] | A. Seshagiri Rao and M. Chidambaram, Modified Smith predictor for control of unstable processes with two RHP poles and time delay, National Conference on Process Control and Automation, 2005, Chennai. |
[19] | A. Seshagiri Rao and M. Chidambaram, Dead time compensator for systems with a RHP zero and a large delay time, National Conference on Control and Dynamical Systems (NCCDS), December 12-15, 2005, IIT Bombay, Mumbai. |
[20] | A. Seshagiri Rao, R. Chandrasekhar and M. Chidambaram, Dead time compensator for systems with large delay time, Recent Trends in Instrumentation Applications (RETINA), 2004, Kovilpatti, Tamilnadu. |