International Journal of Aerospace Sciences

The International Journal of Aerospace Sciences (IJAS) is an international bi-monthly peer-reviewed journal designed to be of wide range of interest and use to all those concerned with research in aerospace sciences and their applications in research establishments, industry and universities. IJAS publishes original papers, review articles related to all fields of aerospace research. Before submission of your article(s) to the International Journal of Aerospace Sciences, please e-mail an article abstract (less than 150 words) with the first and last name of all authors, their affiliations, and the corresponding author's e-mail address to the Editor-In-Chief, Dr. Amir S. Gohardani via the e-mail address: Dr.Amir.Shahram.Gohardani.IJAS@Gmail.com. Kindly, await an approval confirmation from the Editor-In-Chief before submitting your article into the electronic manuscript tracking and peer review system.

Pierluigi Iannelli

Editorial Board Member of International Journal of Aerospace Sciences

Research Scientist, Italian Aerospace Research Centre (CIRA), Italy

Research Areas

Computational Fluid Dynamics, Applied Aerodynamics, High-Lift, Aerodynamic Design and Optimization, Flow Control

Education

2001Ph.D.Aerospace Sciences and Technologies, II University of Naples, Engineering Faculty, Aerospace Engineering Department, Aversa, Italy
1993-1998M.Sc.Aerospace Engineering, II University of Naples, Engineering Faculty, Aversa, Italy

Experience

2002 - presentSenior Research Scientist, Aircraft Division/Fluid Mechanics Unit/Fluid Dynamics Laboratory, Italian Aerospace Research Centre (CIRA), Italy
1999 – 2001Research Assistant, Department of Aerospace Engineering, Engineering Faculty, II University of Napoli, Aversa, Italy
1998 – 1999Contract Researcher, Aerospace Engineering Department, Engineering Faculty, University of Napoli “Federico II”, Napoli, Italy

Publications: Journals

[1]  Iannelli, Denaro, Analysis of the local truncation error in the pressure-free projection method for the Navier-Stokes equations: a new accurate expression of the boundary conditions, International Journal of Numerical Methods in Fluids, Vol. 42, 2003.
[2]  Iannelli, Denaro, De Stefano, A Deconvolution-based Fourth Order Finite Volume Method for Incompressible Flows On Non-Uniform Grids, International Journal of Numerical Methods in Fluids, Vol. 43, 4, pagg. 431-462, 2003.
[3]  Moens, Perraud, Krumbein, Toulorge, Iannelli, Eliasson, Hanifi, Transition Prediction and Impact on a Three-Dimensional High-lift-Wing Configuration, Journal of Aircraft, Vol. 45, 5, 2008.
[4]  Donelli, Iannelli, Chernyshenko, Iollo, Zannetti, Flow Models for a Vortex Cell, AIAA Journal, Vol. 47, 2, February 2009.

Publications: Conferences/Workshops/Symposiums

[1]  Iannelli, Denaro, Fourth Order Finite Volume Scheme On Non-Uniform Grids For The Solution of Navier-Stokes Equations Based On Fractional Time-Step Method, ICFD - International Conference on Numerical Methods for Fluid-Dynamics, Oxford University, Oxford, UK, 2001.
[2]  Iannelli, De Stefano, Denaro, An Effective Fourth-Order Finite Volume Method for DNS/LES on Non-Uniform Grids, Third AFOSR International Conference on Direct Numerical Simulation and Large Eddy Simulation, University of Texas, Dallas, USA, 2001.
[3]  Iannelli, Denaro, Fourth Order Finite Volume Numerical Solution of Incompressible Flows On Non-Uniform Grid, XV AIMETA (Italian Association of Theor. & Applied Mechanics) Conference, Taormina, Italy, 2001.
[4]  Iannelli, Denaro, De Stefano, Analisi della Metodologia di Filtraggio nella Simulazione LES ai Volumi Finiti, XVII AIDAA (Italian Association for Aeronautics and Astronautics) Conference, Rome, Italy, 2003.
[5]  Quagliarella, Iannelli, Vitagliano, Chinnici, Aerodynamic shape design using hybrid evolutionary computation and fitness approximation, AIAA 1st Intelligent Systems Technical Conference, Chicago, USA, AIAA 2004-6514, 2004.
[6]  Iannelli, Donelli, Zanazzi, Mingione, Novel devices for the turbulent flow separation control: CFD-based design of an experimental test bed in the CIRA CT-1 wind tunnel test facility, 1st European Forum on Flow Control, Poitiers, France, 2004.
[7]  Iannelli, Denaro, Lampitella, Micro Vortex Generators RANS simulation via source term modelling in a commercial CFD solver, ERCOFTAC - European Drag Reduction and Flow Control Meeting, Ischia, Italy, 2006.
[8]  Moens, Perraud, Krumbein, Toulorge, Iannelli, Eliasson P., Hanifi A., Transition prediction and impact on 3D high-lift wing configuration, 25th AIAA Applied Aerodynamics Conference, Miami, USA, AIAA-2007-4302, 2007.
[9]  Donelli, De Gregorio, Iannelli, Trapped Vortex on thick airfoil. Comparison between PIV measurements and Numerical Investigations, European Wind Tunnel Association Workshop, Modane (FR), 2008.
[10]  Donelli, De Gregorio, Iannelli, Flow control on a high thickness airfoil by a trapped vortex, EUROMECH Fluid Mechanics Conference, Manchester (UK), 2008.
[11]  Donelli, De Gregorio, Iannelli, Flow Separation Control By A Trapped Vortex Cavity, 7th SIG 33-ERCOFTAC – FLUBIO workshop, Genoa, Italy, 2008.
[12]  Donelli, Iannelli, Iuliano, De Rosa, Suction Optimization on Thick Airfoil to Trap Vortices, XIX AIMETA (Italian Association of Theoretical and Applied Mechanics) Conference, Ancona, Italy, 2009.
[13]  Donelli, De Gregorio, Iannelli, Flow Separation Control by Trapped Vortex”, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, USA, AIAA-2010-1409, 2010.
[14]  Iannelli, Quagliarella, Multi-objective/Multi-point shape and setting high-lift system optimization by means of Genetic Algorithm and 2D Navier-Stokes equations, EUROGEN 2011 Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control, Italy, 2011.
[15]  Minervino, Iannelli, Quagliarella, 3D Flap Design Using Navier-Stokes Equations and Evolutionary Optimization Techniques on an Industrial Platform, EUROGEN 2011 Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control, Italy, 2011.
[16]  Iannelli, Wild, Minervino, Moens, Raets, Analysis and Application of Suitable CFD-based Optimization Strategies for High-Lift System Design, Special Technology Session, ECCOMAS 2012 conference, Wien, 2012.
[17]  Benini, Ponza, Iannelli, Struber, Hrncir, Moens, Kuehn, Multi-Point Shape and Settings Optimization of High-Lift Airfoils in both Take-off and Landing Conditions, ECCOMAS 2012 conference, Wien, 2012.