Journal of Mechanical Engineering and Automation

Journal of Mechanical Engineering and Automation publishes papers of high quality through critical reviews and is intended to become a quality international journal in the field of mechanical engineering and automation. The journal features a mix of experimental, numerical, and theoretical articles dealing with all aspects of the field.


Vinay Sharma

Editorial Board Member of Journal of Mechanical Engineering and Automation

Professor, Department of Production Engineering, Birla Institute Of Technology, India

Research Areas

Nontraditional Manufacturing Engineering, Quality Engineering, Metal Foams

Education

2006PhD Birla Institute of Technology, Mesra, Ranchi,
1996MEProduction Engineering) Sambalpur University
1994A.M. I. E.The Institution of Engineers, India

Experience

2011-presentProfessor, Birla Institute of Technology, Mesra, Ranchi
2007-2011Associate Professor, Birla Institute of Technology, Mesra, Ranchi
2005-2006Lecturer, Birla Institute of Technology, Mesra, Ranchi
1999-2005Lecturer, Birla Institute of Technology, Mesra, Ranchi

Publications: Journals

[1]  Vinay Sharma, Somnath Chattopadhyaya, Sergej Hloch, "Multi response optimization of process parameters based on Taguchi—Fuzzy model for coal cutting by water jet technology", International Journal of Advanced Manufacturing Technology, Springer-Verleg, Published online, 16th March 2011
[2]  Vinay Sharma, Minakshi Kumari, Santosh Kumar, "Reliability Improvement of Modern Aircraft Engine through Failure Modes and Effects Analysis of Rotor Support System", Emerald, International Journal of Quality & Reliability Management, Vol 28, Issue 6
[3]  V N Sundharam, Vinay Sharma, I S Stephan Thangaiah "Reengineering of Manufacturing Industries Operation using Balanced Scorecard-A Case Study" International Journal of Advanced Operations Management (IJAOM), Inderscience Publication ,accepted for publication in Special Issue
[4]  Joyjeet Ghose, Vinay Sharma, Surender Kumar, "Compressive Behavioural Analysis of Al-MMC Foam", International Journal of Industrial & Production Engineering & Technology,(2011) Volume 1, Number 1, pp35-43
[5]  Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma "Environmental Management for small Sized Indian Enterprises in Manufacturing", Annals of Faculty Engineering Hunedoara-International Journal of Engineering-Journal of Manufacturing Engineering (ISSN 1335-7972), (2011), no 2, Vol X, , pp 54-56
[6]  Rajeshwari Chatterjee, Vinay Sharma, Surender Kumar "Resource Utilization and Environmental Impact of Biodiesel Produced from Jatropa Curcas", International Journal of Manufacturing Technology and Research' 'Jan-June 2011,(ISSN: 0973-0281), Vol. 7, No. 1,pp 81-91
[7]  Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma "Performance Of Sustainable Logistic Practices of SMES in Delhi" International Journal of Research In Computer Application & Management (ISSN 2231-1009), 2011, Volume No: 1 Issue No. 3 (May) pp 85-89
[8]  Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, " Performance of Eco Procurement Practices and Green Supply chain Performance of SMEs in Delhi, B Shastra-International Journal of Management" (ISSN 2229-2010), March 2011, Vol 2 Issue 1, pp 43-46
[9]  Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, "Approaching Green Supply Chain Management Through Reusing & Recyclable Packing Method", International Journal of Retailing and Marketing, (ISSN 0976-318X), October 2010, special issue, pp 98-102
[10]  Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, "Role of Environmental conscious design and manufacturing for implementation of green supply chain" International Journal of Management Research and Technology, (ISSN 0974-3502) serial publications, 2010, vol 4 no 2, pp533-539
[11]  G. Pari , Santhosh, Vinay Sharma "Reliability improvement of electronics standby display system of modern aircraft", Emerald, International Journal of Quality & Reliability Management,(ISSN 0265-671X) 2008 pp 955-967, Vol. 25, issue 9 ,
[12]  Vinay Sharma, Surender Kumar "A study of process parameters for coal cutting under Indian environmental condition using hydro jet cutting system", Inderscience publication, International Journal of Manufacturing Technology and Management, 2005 pp. 391-403, Vol. 7, Nos. 2/3/4,
[13]  V N Sundharam, Vinay Sharma, I S Stephan Thangaiah, "Business Process Reengineering and Value Chain Analysis" Crescent Journal of Business, (ISSN 2231-2994) 2011, vol1, No.1, pp 74-87
[14]  Joyjeet Ghose, Vinay Sharma, Surender Kumar, "Al-MMC FOAM: Synthesis and Characterisation", STM Journal, Journal of Materials & Metallurgical Engineering, February, 2011, Volume 1, Issue 1, pp 1-10
[15]  Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, "What role can green supply chain management play in mitigating global warming", Journal of chemistry in Asia (ISSN 0975-9468) Sept 2010, vol 1, no2 &3, pp179-192
[16]  Joyjeet Ghose, Vinay Sharma, Surender Kumar, "Manufacturing and Characterisation of AL-MMC Foam for Industrial Applications. Technoinsight (ISSN 0975-4946), 2010. Vol II, No. 1, A national journal published by Rajiv Gandhi Forum, Orissa.
[17]  S. Chattopadhyaya, P. Sehgal, Vinay Sharma, Aniruddha Ghosh, "Industrially robust ND: YAG lasers for cutting, drilling and welding steels, OEM Update for efficient manufacturing" Welding Special ,B2B Purchase, National Magazine for Project Procurement, Vol. 1 , Issue 09, pp. 40-42. Feb. 2010,
[18]  Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma "Green Manufacturing;: Green Value Chain Practices for the Indian Enterprises", ISST journal of Mechanical Engineering,(ISSN-0976-7371) Vol. 1 Jan-June 2010 pp73-75
[19]  Gopal Verma, Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma "Energy Management In Small & Medium Indian Enterprises: An Approach", , ISST Journal of Electrical & Electronics Engineering Vol. 1 No.1, (January-June 2010), p.p. 11-15
[20]  S. Chattopadyaya, P. Sehgal, Vinay Sharma, Aniruddha Ghosh, "A Critical Linguistic Assessment of the Process Parameters on The Relative Ranks of the Yield Parameters for Nd: Yag Laser Drilling" Indian welding journal, OCTOBER 2009, PP, 21-25

Publications: Conferences/Workshops/Symposiums

[1]  Vinay Sharma, Somnath Chattopadhyaya, Sergej Hloch, " Multi response optimization of cutting coal through water jet", International Seminar on Recent Advances in Geosciences, ISM Dhanbad, January 11-13 2011, pp-208-216, ISBN NO-1-30-31808-39
[2]  Joyjeet Ghose, Vinay Sharma and Surendra Kumar, "Measurement of interfacial frictional forces during compressive deformation of Al-MMC foam" International Conference on Industrial Tribology 2010 02-04 Dec, 2010, RDCIS, SAIL, Ranchi
[3]  Manish Oraon, Vinay Sharma," Sheet Metal Micro Forming: Future Research Potentials" , Proceeding of International conference on Advance Mechanical Engineering (AMAE) 2010, Dec 21-22 2010, Trivandrum
[4]  Joyjeet Ghose, Vinay Sharma and Surendra Kumar, Morphological Characterization of Aluminium Foam by Image Processing Technique, 3rd International & 24th AIMTDR (All India Manufacturing Technology, Design and Research) Conference A.U. College of Engineering (A), Andhra University, Visakhapatnam,, December 13-15, 2010.
[5]  V N Sundharam, Vinay Sharma, I S Stephan Thangaiah "Quality Functional Deployment in Liquor Manufacturing Industry-A case Study", XIV Annual International Conference of the Society of Operations Management Management SOM 2010, organized by the National Institute of Industrial Engineering (NITIE), Mumbai, in partnership with The School of Managements (The University of Texas at DALLAS, Shailesh J Mehta School of Management IIT Bombay, Insead Social Innovation Centre France and S.P.Jain Institute of Management & Research SPJIM) 17-19, December 2010.
[6]  J Ghose, Vinay Sharma, S. Kumar, "Multi Functional Behavioural Analysis Of AL-SIC Metal Matrix Composite Foam Produced By (TiH2-CaCO3) Dual Foaming Agent", Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference MSEC2010, Bayfront Convention Center, Erie, Pennsylvania, USA, October 12-15, 2010
[7]  Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, "Environmental Management for Small Sized Indian Enterprises in Manufacturing" Advanced topics in Manufacturing and Management, University of Czestochowa, faculty of Management, Poland, 2010, (ISBN-978-83-61118-30-5), pp-103-106
[8]  Sanjeev Kumar , Somnath Chattopadhyaya, Vinay Sharma, "Approach of Green Supply Chain Management for Indian Enterprises", 5th SIMSR-ASIA MARKETING CONFERENCE, at SIMSR (K.J. Somaiya Institute of Management Studies and Research), Mumbai India, 2nd & 3rd JANUARY 2010
[9]  Santhosh, G. Pari, Vinay Sharma " Failure Mode And Effects Analysis of Electronics Standby Display System Of Modern Aircraft", proceeding of international conference on " Quality Management Practices for Organizational Excellence", Excel Books (ISBN NO-978-81-7446-582-5), 16th-17th August 2007, Mumbai, PP-241-250
[10]  Vinay Sharma, Surender Kumar, "Water Jet Cutting System for Indian Coal Mines" PP-184-191,Proceedings of International Conference on "Advanced Manufacturing Technology"29th-31st January 2003
[11]  Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, "Implementation of cleaner production towards environmental quality improvement of SMEs in India" National conference in mechanical engineering for new generation industry, (EFME 2011), Industry-Institute partnership cell (AICTE sponsored) Ideal Institute of Technology in association with Ministry of New and Renewable Energy, Government of India, 12-13 March 2011, Allied Publishers pvt ltd. (ISBN no 978-81-8424-667-4) pp 93-99
[12]  Thakur Abhinav Kumar, Vinay Sharma, Bijay Kumar Singh, "Eco Friendly Material Processing And its Important Relevance in Indian Context", Eco-friendly conference for sustainable Development, GLA Institute Mathura, 19-21 November 2010
[13]  Joyjeet Ghose, Vinay Sharma, Surender Kumar "Synthesis of AL-MMC Foam and its Potential Industrial Applications, Proceedings of National Conference On Recent Advances in Manufacturing (Ram-2010) S. V. National Institute of Technology Surat, 19-21 July, 2010,pp 39-44, (excel publication ISBN: 93-80697-05-8)
[14]  Subodh Kumar,, Vinay Sharma, A. K. S. Choudhary, "A Review of Laser Based Direct Metal Rapid Prototyping Technology", Proceedings of National Conference On Recent Advances in Manufacturing (Ram-2010) S. V. National Institute of Technology Surat, 19-21 July, 2010, pp 186-191(excel publication ISBN: 93-80697-05-8)
[15]  Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, "Supply Chain Management: a semiotics Approach", National Conference on Techno-Lingual Communication, Sunderdeep Engineering College Gaziabad, UP, 27 March 2010
[16]  Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, "Approach to lean and Green supply chain system: a case study", Managerial Challenges of 21st Century in corporate world, BIT Noida Campus,UP, 12-13 February 2010
[17]  K. Ajay, Nitin Kumar, J. Ghose, Vinay Sharma, "Parametric study of the machinability of aluminium foams by electro discharge machine", National Conference On Recent Advances In Manufacturing Technology 14-15 March 2009,SASTRA University, Thanjavur, Tamil Nadu, India,
[18]  Subodh Kumar, Somnath Chattopadhyaya, Vinay Sharma "Reliability Analysis And Maintenance Strategies: A Case Study", National seminar on CSMGC 2009, (Core Sector Management for Global Competitiveness) 20-21 Feb 2009, ISMU Dhanbad,
[19]  Minakshi Kumari, Ravi Tiwari, Vinay Sharma, "Jishu Hozen Approach in process Industry: A case study on Wire rope manufacturing", Mapping excellence towards global competiveness (MAP EXEL-2008), 16-17 October 2008, The Institution of Engineers (India), Maharashtra State Centre, Mumbai,
[20]  Ravi Tiwari, Minakshi Kumari, Vinay Sharma, "Productivity Enhancement through Kobetsu Kaizen in Manufacturing Industry", Mapping excellence towards global competiveness (MAP EXEL-2008), 16-17 October 2008, The Institution of Engineers (India), Maharashtra State Centre, Mumbai
[21]  Vinay Sharma, S. Chattopadhyaya, "Development of an eco-friendly technology for size reduction of coal lumps under Indian environmental conditions", National seminar on Crushing, Screening and Conveying, 11-12 September 2008, ISM Dhanbad
[22]  Vinay Sharma, "Micro-Nano Forming-Tools And Techniques", National conference on Precision forming, 2007, BIT Mesra Ranchi.
[23]  S. Panda, Vinay Sharma "Expert System for Lubricant Condition Monitoring", Recent Advances in Industrial Tribology and Maintenance" 21st-22nd January 2006, NIT, Rourkela, Orissa,
[24]  "Hierarchical Oriented Multi-Agent Based Data Mining Distribution For Manufacturing Sector" CAD/CAM, Robotics and futuristic factory, 10th¬¬-11th December 2005, Institution of Engineers (India), Jharkhand State Centre.
[25]  "Automation of Water Jet Machine", CAD/CAM, Robotics and futuristic factory, 10th¬¬-11th December 2005, Institution of Engineers (India), Jharkhand State Centre.
[26]  Pawar Shivraj, Manoj Kumar, Pankaj Mishra, S Mutthukumaran, Vinay Sharma " Parametric Optimization For Quality Surface Finish In Laser Cutting Using Fractional Factorial Design", 21st AIMTDR, Vellore Institute of Technology, Vellor, India, by NAROSA Publishing House, New Delhi India, ISBN 81-7139-680-X, 2004
[27]  S. Kumar, Vijay Pandey, Vinay Sharma "Self Learning Concept in Technical Education Through Curriculum Development, 19th Indian Engineering Congress, 17th-19th December 2004, Mumbai, India
[28]  Vinay Sharma, B. K. Singh "Expert System for Mould Design in Automated Die Casting Process", 20th AIMTDR, 2003, Birla Institute of technology, Mesra, Ranchi India, 13-15 December 2002 published by NAROSA Publishing House, New Delhi India, ISBN 81-7139-509-9
[29]  Arvind Kumar, Vinay Sharma, S Kumar" Automation in Hydro Jetting Technology for Coal Mining" Proceedings of National Seminar on " Mechatronic in Manufacturing Systems"25th-26th of March 2000, , published by Satya Prakashan, New Delhi, ISBN: 81-7684-141-2
[30]  Alok Varma, Vinay Sharma "Rapid Prototyping: An Agile Technology for Product Development" Proceeding of National Seminar on "Agile Engineering: Search of New Path to Excellence",4th-5th of October 1999, published by Satya Prakashan, New Delhi, ISBN: 81-7684-056-4
[31]  Balraj Gupta, Sudhir Gupta, P.K. Purkait, Vinay Sharma, Atamjeet Singh "Conceptual Design Of Spin Recovery Parachute System For LCA" Proceedings of National Seminar on "Aerodynamic and Mechanical decelerators and Inflatable Systems", 08th-09th of April 1999, Published By Tata McGraw-Hill, India. ISBN 0-07-463509-3
[32]  Sudhir Gupta, Balraj Gupta, Sandeep Malik, Ashok Kumar, P. K. Purkait, Vinay Sharma, Atamjeet Singh "Design Development and Testing of Stabilizing parachute for Bomblet" Proceedings of National Seminar on "Aerodynamic and Mechanical decelerators and Inflatable Systems", 08th-09th of April 1999, Published By Tata McGraw-Hill, India. ISBN 0-07-463509-3
[33]  P. K. Purkait, Sudhir Gupta, J. N. Agrawal, Vinay Sharma, Atamjeet Singh "Wind Tunnel Testing of Uni-cross Parachute with Divergent and Convergent Arms" Proceedings of National Seminar on "Aerodynamic and Mechanical decelerators and Inflatable Systems", 08th-09th of April 1999, Published by Tata McGraw-Hill, India. ISBN 0-07-463509-3
[34]  Sandep Malik, Sudhir Gupta, Vinay Sharma, Atamjeet Singh "An Approach for Balloon Design and Manufacturing" Proceedings of National Seminar on "Aerodynamic and Mechanical decelerators and Inflatable Systems", 08th-09th of April 1999, Published by Tata McGraw-Hill, India. ISBN 0-07-463509-3
[35]  Sandeep Malik, Sudhir Gupta, Vinay Sharma, P k Purkait Atamjeet Singh "Drag Measurement through Wind Tunnel Testing for different Hull Shapes Used in Aerostat Application" Proceedings of National Seminar on "Aerodynamic and Mechanical decelerators and Inflatable Systems", 08th-09th of April 1999, Published by Tata McGraw-Hill, India. ISBN 0-07-463509-3