Journal of Mechanical Engineering and Automation

Journal of Mechanical Engineering and Automation publishes papers of high quality through critical reviews and is intended to become a quality international journal in the field of mechanical engineering and automation. The journal features a mix of experimental, numerical, and theoretical articles dealing with all aspects of the field.

Songhao Wang

Editorial Board Member of Journal of Mechanical Engineering and Automation

Associate Professor, Department of Mechanical Engineering, Kun Shan University, Taiwan

Research Areas

Mechanical Design/Engineering/Manufacturing, Creative Product Design, Reverse Engineering, Rapid Prototyping, Mechanical-Electronics Integration

Education

1990-1992Ph.DUniversity of Pittsburgh, USA
1982-1985M.SShanghai University, China
1978-1982B.S Shanghai University, China

Experience

2003-presentTeaching; M.E. Department, Kun Shan University, Taiwan
2002-2003Engineer, DULUBAK TECHNOLOGY INC, PA, USA
1994-2002Engineer, PPG INDUSTRIES, PITTSBURGH, PA, USA
1993-1996Engineer, NAGATI ENGINEERING INC, PITTSBURGH, PA, USA

Publications: Conferences/Workshops/Symposiums/Journals/Books

[1]  Song-Hao Wang, Ronald José Doblado Perez, Ronald García and Jiacheng Chen, "Development of Pipe Flow Generators", Advanced Materials Research, ISSN: 1022-6680, ISSN/ISO: Adv. Mater. Res. Vols. 233-235 (2011) pp 2432-2438
[2]  Songhao Wang, Chinwang Shih and Xinyin He, "A Study on Investment Casting Directly with Plastic Rapid Prototype Patterns", Journal of Materials Science and Engineering, ISSN 1934-8959, USA, November 2010, Volume 4, No.11 (Serial No.36), pp 19-25
[3]  S. Wang, A. Canales, and C. Shih, "A Study of Investment Casting with Plastic Patterns", Materials and Manufacturing Processes, ISSN: 1042-6914, Volume 25 Issue 12, 1482, 12/2010
[4]  S. Wang, C. F. Hernandez Porres, M. Zuo, W. Xiao, "Study of Impeller Design for Pipe Flow Generator with CFD and RP", Conference Proceedings of American Institute of Physics, AIP, (http://www.aip.org/), ISSN 0094-243X, Vol.1225, P.265-275, 06/2010
[5]  S. Wang, á. Canales, C. Shih, "Numerical Analysis for Quick-Casting with Plastic RP Patterns", MES 2009 Conference Proceedings, 17-19/12/2009, National Formosa University, ISSN 2152-1522, pp. 527-532
[6]  S. H. Wang, S. Melendez & C. S. Tsai, "Application of Parametric Sketch and Associability in 3D CAD", Journal of CAD and Application, Vol. 5(6), 2008, pp 822-830, ISSN 1686-4360
[7]  S. Flores, S.H. Wang & C.C. Chang, "Effect Analysis of Internal Structures of Water-Block Design for a CPU liquid Cooling System Using CAE", Journal of International Cooperation, ISSN 1992-90921497, 2008
[8]  C.C. Chang, M.Y. Lee & S.H. Wang "Digital Denture Manufacturing Application of abrasive computer tomography, CNC machining, and rapid prototyping technologies, The international Journal of Advanced Manufacturing Method, Publisher: Springer London, ISSN: 0268-3768 (Paper) 1433-3015 (Online), DOI: 10.1007/s00170-005-0181-z, 04/11/2006
[9]  S. H. Wang, S. Melendez & C. S. Tsai, C. W. Wu, " Parametric Design and Design Associability in 3D CAD", Materials Science Forum Vol. 594 (2008), pp 461-468
[10]  王松浩, 李洸毅, 王威智, 王誌育, 蔡祈賢, "CPU冷卻系統之作動式隧道型散熱座技術", Journal of Advanced Engineering, Vol 4, No.1, pp. 83-88, 2009
[11]  S.Wang, S. Melendez, R. Blanco, M. Gomez, "Simulation of Fluid Dynamics in Active Liquid Heat Sink for CPU Cooling System", Proceedings of EuroSimE 2008, ISBN: 1-4244-1105-X, Germany, pp 438
[12]  S. Flores, S. Wang, C. Chang, "Development of an Internal liquid Cooling System for CPU using CAE", Proceedings IEEE EuroSime 2007, ISBN: 978-1-4244-2127-5, London, pp 543
[13]  Proc. of 13th Leeds-Lyon Symp. on Tribology, 1986 "A Full Numerical EHL Solution for Sliding-Rolling Line Contacts with a Non-Newtonian Rheological Model"
[14]  Porc. of 13th Leeds-Lyon Symp. on Tribology, 1986 "The Effect of Surface Roughness orientation on EHL"
[15]  GEAR, 1986 "The Temperature Rise in Gear Meshing Zone Analyzed by A Thermo-EHL Theory"
[16]   WEAR, Vol. 118, p.185, 1987 "Influence of Visco-Plastic and Visco-Elastic Character of Lubricant on EHL"
[17]  ASME J. Tribology, Vol. 109, p. 666, 1987 "Combined Effects of Thermal and non-Newtonian Character of Lubricant on Pressure, Film Profile, Temperature Rise and Shear Stress in EHL"
[18]  Proc. of CSME Symp. on Gear Strength & Testing, 1987 "Friction Coefficient of Gears"
[19]  Proc. of CSME Symp. on Gear Strength & Testing, 1987 "A Thermal Network Theory and Its Application for Predicting Temperature Distribution in A Gear Transmission System"
[20]  Proc. of CSME Symp. on Gear Strength & Testing, 1987 "Gear Surface Wear and the Optimum Design",
[21]  ASME J. Tribology, Vol. 110, p. 1, 1988 "A Full Numerical EHD Solution for Line Contact under Pure Rolling Condition with a Non-Newtonian Rheological Model"
[22]  WEAR, Vol. 127, p.1, 1988 "The Influence of the Character of Lubricant on the Surface Strength of Gears"
[23]  ASME J. Tribology, Vol. 111, p. 440, 1989 "A Theory of Thermal EHL of Liquid-Solid Lubricant"
[24]  ASME J. Tribology, Vol. 112, p. 259, 1989 "A Theory of Thermal EHL of Liquid-Solid Lubricant"
[25]  WEAR, Vol. 137, p. 51, 1989 "On The Role of Particulate Contamination on Scuffing Failure"
[26]  ASME J. Tribology, Vol. 113, p. 398, 1991 "On The Maximum Temperature in Double-Layer Journal Bearings"
[27]  ASME J. Tribology, Vol. 113, p. 398, 1991 "On The Fluid-Solid Interaction in Reference to Thermo-EHL Analysis of Journal Bearings"
[28]  Tribology Transactions, Vol. 34, p.259, 1991 "The Influence of Lubricant Visco-Plastic Character on the Line Contact EHL under High Sliding Speeds"
[29]  Tribology Transactions, Vol. 35, No. 1, 1992 "Notes on Transient THD Effects in A Lubrication Film"
[30]  ASME J. Tribology, 1992 "Lubrication with Binary Mixtures: Liquid-Liquid Emulsion in EHL Conjunction"
[31]  ASME J. Tribology, 1992 "Lubrication with Emulsion in Cold Rolling"
[32]  ASME J. of Mech. Eng., 1993 "On the Mechanism of Fluid Transport Across the Grinding Zone"