Journal of Mechanical Engineering and Automation

Journal of Mechanical Engineering and Automation publishes papers of high quality through critical reviews and is intended to become a quality international journal in the field of mechanical engineering and automation. The journal features a mix of experimental, numerical, and theoretical articles dealing with all aspects of the field.


Bo Wun Huang

Editorial Board Member of Journal of Mechanical Engineering and Automation

Professor, Department of Mechanical Engineering, Cheng Shiu University, Taiwan

Research Areas

Mechanical Engineering, Fracture Mechanics, Fem, Noise and Vibration Analysis In Structure and Micro Machining.Biomedical Engineering.

Education

B.S. and M.S.Mechanical Engineering from National Taiwan University of Science and Technology
Ph.Dmechanical engineering from the National Sun Yat-sen University

Experience

R & D Engineer, EVERGREEN Industry Co. and KWANGYANG Motor Co.
Professor, Department of Mechanical Engineering, Cheng Shiu University
Vice Dean, Office of Research and Development, Cheng Shiu University
Dean, Office of Research and Development, Cheng Shiu University

Publications: Journals

[1]  Yu P. P., Huang, B. W., 2011, "Time Dependent Buckling and Critical Speed in a Twisted Micro Drilling Process, " Journal of Vibration and Control, (SCI, EI, Accepted, JVC-11-0022.R1)
[2]  Hsiao D. R., Huang B. W., Shih N. C., 2011, "Development and Dynamic Characteristics of Hybrid Fuel Cell-Powered
[3]  Mini-Train System, " International Journal of Hydrogen Energy, doi:10.1016/j.ijhydene.2011.02.121, (on line published, SCI, EI)
[4]  Huang, B. W., 2011, "Instability of a Cracked Twisted Beam with Time Dependent Boundary, " Nonlinear Dynamics, Vol. 63, No.4, pp. 627-637. (SCI, EI, IF: 1.743)
[5]  Huang, B. W., Yu P. P., Lee J. N., Kuang J. H., 2011, "Natural Properties of a Micro Mill with Moving Boundary Conditions, " Advanced Science Letters, Vol. 4, No. 4/5, pp. 1673-1677. (SCI, EI).
[6]  Huang B. W., Kuang, J. H., Tseng J.-G., Wu Y. D., 2011, "Noise Depressed in a Micro Stepping Motor, " Proceedings of World Academy of Science, Engineering and Technology, Vol. 76, pp.167-171. (EI)
[7]  Huang, B. W., Wang F. S., Ko, J. Y., Tseng, J. G., 2010, "Mechanical Stimulation Effect on Proliferation of Murine Osteoblast Cell, " Life Science Journal, Vol. 7, No.1, pp.62-67. (SCI)
[8]  Huang B. W., Cai J. Z. and Hsiao W. L., 2010, "Cutting Force Estimation in a Micro Milling Process, " IMechE, Part B, Journal of Engineering Manufacture, Vol. 224, No. B10, 1615-1619.(SCI, EI)
[9]  Huang B. W., Yu P. P., Kuang, J. H., 2010, "Using Finite Element Analysis on Dynamic Characteristics in a Micro
[10]  Stepping Mill, " Proceedings of World Academy of Science, Engineering and Technology, Vol. 69, pp. 8-12. (EI)
[11]  Huang, B. W., 2009, "A Model Of Vibration In Drilling Into A Fiber-Reinforced Composite Materials, " IMechE, Part B, Journal of Engineering Manufacture, Vol. 223, pp. 1107-1114. (SCI, EI) September. Stepping Mill, " Proceedings of World Academy of Science, Engineering and Technology, Vol. 69, pp. 8-12. (EI)
[12]  Huang, B. W., 2009, "A Model Of Vibration In Drilling Into A Fiber-Reinforced Composite Materials, " MechE, Part B, Journal of Engineering Manufacture, Vol. 223, pp. 1107-1114. (SCI, EI) September.
[13]  Huang, B. W., J. H. Kuang and Yu, P. P., 2009 "Effect of Crack on Drilling Vibration, " Journal of Sound and Vibration, Vol. 322, No.4-5, pp. 1100-1116. (SCI, EI)
[14]  Huang, B. W., Huang Kuang Kung, Kuan-Yu Chang, Bo Kai Hsu, Jung-Ge Tseng, 2009, "Human Cranium Dynamic Analysis, " Life Science Journal, Vol. 6, No.4, pp.15-22. (SCI)
[15]  Chang K. Y., H. Chang C., P. Yu P., Yen K. T. and Huang B. W., 2009, "Natural Properties in a Micro Drill Cutting into Bones, " Life Science Journal, Vol. 6, No.4, pp.28-33. (SCI)
[16]  Huang, B. W., Kuo B. L. and Ye, M. L., 2009, "An Analysis on Vibration of a Micro Stepping Motor System, " Journal of Advanced Engineering. Vol. 4, No. 2, pp.113-117.
[17]  Huang, B. W., Kung, H. K. and Kuang, J. H., 2008, "Modal Localization in Mistuned Tube-Array Structures, " International Journal of Solids and Structures, Vol. 45, No. 11-12, 3192-3202. (SCI, EI,)
[18]  Huang, B. W. and Yu, P. P. and Jou, J. M., 2008, "Parametric resonance of a rotating taper pre-twisted beam with a crack, " Structural Engineering and Mechanics, An International Journal. Vol. 28, No. 2, pp. 259-262. (SCI, EI)
[19]  Kung, H. K. and Huang, B. W., 2008 "Vibration in a Cracked Machine Tool Spindle with Magnetic Bearings, " The Open Mechanical Engineering Journal, Vol. 2, pp.41-48. (EI)
[20]  Huang, B. W., Lin, A. D., Cheng, Y. C. and Kuang, J. H., 2008, "A Dynamic Model for a Drill in the Drilling Process, " International Journal of Aerospace and Mechanical Engineering, Vol. 2, No. 4, pp.234-240. (EI)
[21]  Huang, B. W., Lin, A. D. and Fang, Y. L., 2008, "Natural Property of a Micro Mill for Micro Electronic Products Manufacture, " Journal of the Chinese Society of Mechanical Engineers (Accepted, MEMS00001, SCI, EI)
[22]  Huang, B. W. and Kuang, J. H., 2007, "The Parametric Resonance Instability in a Drilling Process, " ASME, Journal of Applied Mechanics, Vol. 74, No. 5, pp. 958-964. (SCI, EI)
[23]  Huang, B. W., Kung, H. K. and Kuang, J. H., 2006, "Stability in a Twisted Periodic Blade System with Cracks, " AIAA Journal, Vol. 44, No. 7, pp. 1436-1444. (SCI, EI)