Journal of Mechanical Engineering and Automation

Journal of Mechanical Engineering and Automation publishes papers of high quality through critical reviews and is intended to become a quality international journal in the field of mechanical engineering and automation. The journal features a mix of experimental, numerical, and theoretical articles dealing with all aspects of the field.


Abel Cherouat

Editorial Board Member of Journal of Mechanical Engineering and Automation

Professor, University of Technology of Troyes, France

Research Areas

Mechanical, Applied Mathematicl

Education

1994Ph.DUniversity of Science and Technology of Franche-Comte
1991MasterUniversity of Science and Technology of Franche-Comte
1989Engineer National School of Engineers and Technicians Algeria

Publications: Journals

[1]  A. Cherouat, M. Borr & J.C. Gelin, Modelisation du comportement multiaxial des tissus de fibres de verre et applications; Annales des Composites: Essais Multiaxiaux et Composites, vol. 3, p. 17-25, 1995.
[2]  P. Boisse, A. Cherouat, J.C. Gelin & M. Borr, 3D numerical simulations of glass fiber fabric deep-drawing, Composite Engineering, vol. 12 (4), p. 342-359, 1995.
[3]  P. Boisse, A. Cherouat, J.C. Gelin & H. Sabhi, Experimental study and F.E simulation of glass fiber fabric shaping process; Polymer Composites, vol. 16 (1), p. 85-95, 1995.
[4]  A. Cherouat, J.C. Gelin, P. Boisse & H. Sabhi, Modelling the glass fiber fabrics process by the finite element method; European Journal of Finite Elements, vol. 4 (2), p. 195-182, 1995.
[5]  J. Gelin, A. Cherouat, P. Boisse & H. Sabhi, Manufacturing of thin composite structures by the RTM process numerical simulation of the shaping operation; Composites Science and Technologie, vol. 56 (7), p. 711-718, 1996.
[6]  P. Boisse, M. Borr, K. Buet & A. Cherouat, Finite element simulation of textile composite forming including the biaxial fabric behavior, Composite Part B Engineering Journal, vol. 28, p. 453-464, 1997.
[7]  A. Cherouat & J.L. Billoet, Modeling and simulation of composite fabrics deformation by shaping process, Int. J. of Forming Processes,, vol. 4, p. 225-251, 1999.
[8]  A. Cherouat & J.L. Billoet, Une approche avancee pour la modelisation du comportement des pre-impregnes lors du formage des pièces composites, Revue des Composites et des Materiaux Avances, vol. 9 (1), p.7-26, 1999.
[9]  A. Cherouat, J.L. Billoet & S. Belhous, Two-component finite element model for the simulation of shaping prepreg woven fabric, Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, p. 323-330, ISBN 0-7923-6024-9, 1999.
[10]  O. Sicot, X. Lu Gong, A. Cherouat & J. Lu, Importance des contraintes residuelles sur le comportement mecanique d'un composite stratifie, Annales des Composites, vol. 1, p. 65-69, ISBN 2-9515965-2-9, 1999.
[11]  J.L. Billoet & A. Cherouat, Une formulation numerique pour la caracterisation de la deformation des tissus composites par mise en forme, Revue Europeenne des Elements Finis, vol. 9 (5), p. 561-590, 2000.
[12]  J.L. Billoet & A. Cherouat, New numerical model of composite fabric behaviour: simulation of manufacturing of thin composite, Advanced Composites Latter, vol. 9 (3), p. 167-179, 2000.
[13]  A. Cherouat & J.L. Billoet, Finite element model for the simulation of pre-impregnated woven fabric by deep-drawing and laying-up processes, J. of Advanced Material, vol. 32 (4), p. 42-53, 2000.
[14]  K. Saanouni, A. Cherouat & Y. Hammi, Numerical aspects of finite elastoplasticity with damage for metal forming, European Journal of Finite Elements, vol. 10 (2-3-4), p. 327-351, 2001.
[15]  A. Cherouat & J.L. Billoet, Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics, J. of Materials Processing Technology, vol. 118, p. 460-471, 2001.
[16]  G. Montay, A. Cherouat & J. Lu, Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy, J. of Neutron Research, vol. 9, (2-4), p. 337-344, 2001.
[17]  A. Cherouat, X.L. Gong, O. Sicot and J. Lu, Influence of the Residual Stresses on the Mechanical Behavior of Advanced Composite Parts, J. of Neutron Research, vol. 9 (2-4), p. 319-330, 2001.
[18]  G. Montay, A. Cherouat, J. Lu, Bianchi & N. Baradel, Development of the high precision step incremental hole drilling method for the study of residual stress on multi layer materials influence of temperature and substrate on ZrO2-Y2O3 8% wt coatings, Surface and Coatings Technology, vol. 155, p. 152-160, 2002.
[19]  H. Borouchaki, A. Cherouat, K. Saanouni & P. Laug, Remaillage en grandes deformations. Applications à la mise en forme de structures 2D, Revue Europeenne des Elements Finis, vol. 11(1), p. 57-79, 2002.
[20]  A. Cherouat, X.L. Gong, O. Sicot and J. Lu, Study of residual stresses in composite laminates by the finite element method and experimental analysis, Material Science Forum, Trans Tech Publications Ltd, p. 925-930, 2002.
[21]  A. Cherouat, G. Montay and J. Lu, Study of residual stresses in complex parts by experimental and numerical methods, Material Science Forum, Trans Tech Publications Ltd, p. 251-256, 2002.
[22]  J.L. Billoet, H. Borouchaki and A. Cherouat, From the pre-dimensioning approach to the optimisation of forming processes of thin fabric composite parts, Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, isbn-1-4020-0978-8, 2002
[23]  A. Cherouat, K. Saanouni and Y. Hammi, Numerical improvement of thin tubes hydroforming with respect to ductile damage, Int. J. of Mechanical Sciences, vol. 44, p. 2427-2446, 2002.
[24]  J.F. Mariage, K. Saanouni, P. Lestriez, A. Cherouat, K. Nesnas, Numerical simulation of ductile damage in metal forming processes: a simple predictive model, Part I. Theoretical and Numerical Aspects, Int. J. of Forming Processes, vol. 5 (2-3-4), p. 363-376, 2002.
[25]  J.F. Mariage, K. Saanouni, P. Lestriez, A. Cherouat, K. Nesnas, Numerical simulation of ductile damage in metal forming processes: a simple predictive model, Part II. Some Applications, Int. J. of Forming Processes, vol. 5(2-3-4), p. 363-376, 2002.
[26]  H. Borouchaki, A. Cherouat, P. Laug and K. Saanouni, Adaptive remeshing for ductile fracture prediction in metal forming, C.R. Acad. Sci. Paris, Serie II B, Mecanique des Solides et des Structures, vol. 330 (10), p. 709-716, 2002.
[27]  Y.Q. Guo, K. Saanouni, A. Cherouat, Y.M. Li, G. Loppin, K. Debray, Two methodologies for the simulation of ductile damage in sheet metal forming processes, J. of Plasticity Engineering, vol. 9 (4), p. 47-55, 2002.
[28]  H. Borouchaki et A. Cherouat, Une nouvelle approche geometrique pour le drapage de structures composites, Revue des Composites et des Materiaux Avances, vol. 12 (3), p.407-421, 2002.
[29]  A. Cherouat and K. Saanouni, Numerical simulation of sheet metal blanking process using a coupled finite elastoplastic damage modeling, Int. J. of Forming Processes, vol. 6 (1), p. 7-32, 2003.
[30]  O. Sicot, X.L. Gong, A. Cherouat and J. Lu, determination of residual stress in composite laminates using the incremental hole-drilling method, J. of Composites Materials, vol. 37 (09), p. 831-844, 2003.
[31]  A. Cherouat, K. Saanouni and Y. Hammi, Improvement of forging process of a 3d complex part with respect to damage occurrence, J. of Materials Processing Technology, vol. 142(2), p. 307-317, 2003.
[32]  P. Lestriez, A. Cherouat, J.F. Mariage et K. Saanouni, Simulation numerique du couplage thermomecanique endommagement ductile application a la mise en forme, Journal de Physique IV, vol. 12, p. 353-360, 2003.
[33]  H. Borouchaki et A. Cherouat, Drapage geometrique des composites, C.R. Acad. Sci. Paris, Serie II B, Mecanique des Solides et des Structures, vol. 331, p. 437-442, 2003.
[34]  K. Saanouni, N. Belamri, M. Khelifa, H. Badreddine, & A. Cherouat, A finite anisotropic plastic flow with ductile damage for sheet metal forming simulation, Computational Fluids and Solids Mechanics, vol. 1, p. 611-614, 2003.
[35]  I. Ben Naceur, H. Borouchaki, A. Cherouat et J. M. Bachmann, Caracterisation et modelisation de l'aptitude à la deformation des structures souples, Revue des Composites et des Materiaux Avances, vol. 13 (3), p. 231-240, 2003.
[36]  P. Lestriez, K. Saanouni, J.F. Mariage and A. Cherouat, Numerical prediction of damage in metal forming process including thermal effects, Int. J. of Damage Mechanics, vol. 13 (1), 59-80, 2003.
[37]  A. Cherouat, Y.Q. Guo, K. Saanouni, Y.M. Li, K. Debray and G. Loppin, Incremental versus inverse numerical approaches for ductile damage prediction in sheet metal forming, Int. J. of Forming Processes, vol.7 (1-2), p. 99-122, 2004.
[38]  G. Montay, A. Cherouat, C. Garnier and J. Lu, Determining residual stress in spherical component: a new application of the hole drilling method, Journal of Testing and Evaluation, vol. 32 (1), p. 73-79, 2004.
[39]  K. Saanouni, J.F. Mariage, A. Cherouat and P. Lestriez, Numerical prediction of central bursting in axisymmetric cold extrusion by continuum damage mechanics, Computer & Structures, vol. 82 (27), p. 2309-2332, 2004.
[40]  O. Sicot, X. L. Gong, A. Cherouat and J. Lu, influence of experimental parameters on determination of residual stress using the incremental hole-drilling method, Composites Science and Technology, vol. 64 (2), p. 171-180, 2004.
[41]  G. Montay, A. Cherouat, A. Nussair and J. Lu, Residual stresses in coating technology, J. of Materials Science & Technology, vol. 20, p. 81-84, 2004.
[42]  H. Borouchaki, P. Laug, A. Cherouat and K. Saanouni, Adaptive remeshing in large plastic deformations, Int. J. for Numerical Methods in Engineering, vol. 63, p. 1-36, 2005.
[43]  L. Moreau, H. Borouchaki et A. Cherouat, Remaillage adaptatif pour la mise en forme des toles minces, C.R. Acad. Sci. Paris, Serie II B, Mecanique des Solides et des Structures, vol. 333 (4), p. 371-378, 2005.
[44]  G. Montay, O. Sicot, X.-L Gong, A. Cherouat, J. Lu, Determination of the residual stresses in composite laminate using the compliance method, Materials Science Forum, vol. 490-491, p. 533-538, 2005.
[45]  A. Cherouat, K. Saanouni, H. Borouchaki and P. Laug, Virtual metal forming with damage occurrence using adaptive remeshing, Int. J. of Forming Processes, vol. 8 (2-3), p. 311-332, 2005.
[46]  J.F. Mariage, K. Saanouni, P. Lestriez & A. Cherouat, Numerical simulation of an hexnut forming process with damage effect, Int. J. of Forming Processes, vol. 8 (2-3), p. 291-310, 2005.
[47]  M. Khelifa, H. Badreddine, N. Belamri, A. Gahbiche, K. Saanouni, A. Cherouat & A. Dogui, Effect of anisotropic plastic flow on the ductile damage evolution in hydro bulging test of thin sheet metal, Int. J. of Forming Processes, vol. 8 (2-3), p. 271-289, 2005.
[48]  I. Ben Naceur, A. Cherouat, H. Borouchaki, J.M. Bachmann, Modelisation mecanique et numerique de la mise en forme de structures souples avec remaillage adaptatif, Mecanique & Industrie, vol.6 (3), p. 321-329, 2005.
[49]  P. Lestriez, K. Saanouni et A. Cherouat, Simulation numerique de la coupe orthogonale par couplage thermique comportement-endommagement en transformations finies, Mecanique & Industrie, vol.6 (3), p. 297-307, 2005.
[50]  A. Cherouat, H. Borouchaki and J.L. Billoet, Geometrical and mechanical draping of composite fabric, European Journal of Computational Mechanics, vol. 14-n° 6-7, p. 693-707, 2005.
[51]  O. Sicot, XL Gong, A. Cherouat and J. Lu, Influence of residual stresses on the mechanical behavior of composite laminate materials, Advanced Composite Materials, vol. 14 (4), p. 319-342, 2005.
[52]  A. Cherouat, H. Borouchaki, K. Saanouni and P. Laug, Numerical methodology for metal forming processes using elastoplastic model with damage occurrence, J. of Materials Science & Technology, vol. 22 (2), p. 279-283, 2006
[53]  O. Sicot, X.L Gong, A. Cherouat, Influence of the machining parameters on the hole-drilled quality in composite laminate, Composite Sciences and Technology, Accepted, mars, 2006
[54]  G. Montay, A. Cherouat and J. Lu, Residual stress analysis in crankshaft using the hole drilling method, Materials Science Forum, September 2006, vol.524-525, p. 737-742.
[55]  A. Cherouat, N. Belamri, K. Saanouni-P. Autesserre, Residual stresses in 3D sheet metal guillotining using a coupled finite elastoplastic damage model, Materials Science Forum, September 2006, vol.524-525, p. 89-94.
[56]  O.Sicot, X-L. Gong, X-J. Gong, A. Cherouat, Dependence between aging and residual stresses on composite laminate, Materials Science Forum, September 2006, vol.524-525, p. 813-817.
[57]  L. Giraud-Moreau, Borouchaki, H & A. Cherouat, A Remeshing Procedure for Numerical Simulation of Forming Processes in Three Dimensions, New York: Springer ISBN 3-540-34957-X, pp. 127-143, 2006.
[58]  M. Khelifa, K. Saanouni et A. Cherouat, Prevision de l'endommagement ductile. Application à l'emboutissage de toles minces, Mecanique & Industries, vol. 7, p. 465–473, 2006.
[59]  R. Figueredo et A. Cherouat A new approach to couple a constitutive model for the Mullin effect with residual strain and the damage of elastomer materials, Constitutive Models for Rubber V., Ed. Taylor & Francis, p. 85-90, 2007.
[60]  R. Taiar, Y. Toshev, F. Boyer, A. Cherouat, G. Agnesina, S. Milusheva, CAD and mechanical development of a new kind of hemiplegics orthesis, Series on Biomechanics, vol.23, n° 1, 35-42, 2007.
[61]  R. Figueredo and A. Cherouat A new approach to couple a constitutive model for the Mullin effect with residual strain and the damage of elastomer materials, Constitutive Models for Rubber V., Ed. Taylor & Francis, p. 85-90, 2007.
[62]  L. Giraud-Moreau, H. Borouchaki, A. Cherouat, Adaptive remeshing for sheet metal forming in large plastic deformations with damage, Int J Material Forming (2008) vol.1, 129-132
[63]  A. Cherouat, B. Radi and A. El Hami, The frictional contact of the composite fabric's shaping, Acta Mechanica, vol. 199, 29–41, 2008
[64]  R. Figueredo and A. Cherouat, Permanent strain and damage formulation in forming processes of filled-elastomer materials, Int J Material Forming (2008) vol. 1, pp. 855–858
[65]  A. Cherouat, M. Ayadi, N. Mezghani & F. Slimani, Experimental and finite element modelling of thin sheet hydroforming Processes, Int J Material Forming (2008) vol. 1, pp. 313–316
[66]  N. Mezghani, H. Salhi, M. Ayadi, A. Cherouat Experimental and numerical simulation of hydroforming International Review of Mechanical Engineering (I.RE.M.E.), Vol., 2008
[67]  A. Cherouat, a, L. Moreau, H. Borouchaki. Advanced numerical simulation of metal forming processes using adaptive remeshing procedure, Materials Science Forum Vol. 614 (2009) pp 27-33
[68]  M. Ayadi, A. Cherouat, M. Rezgui, N. Mezghani, Experimental and numerical studies of welded tubes formability, Materials Science Forum Vol. 614 (2009) pp 129-134
[69]  A. Cherouat; Radi, B.; El Hami, A., The Study of the Composites Fabric's Shaping using an Augmented Lagrangian Approach, Multidiscipline Modeling in Materials and Structures, vol. 5, No2, 2009, pp. 185-198(14)
[70]  A. Cherouat and Houman Borouchaki, Actual state of the art of composite fabric forming: geometrical and mechanical approaches, Materials 2009, vol. 2(4), 1835-1857.
[71]  M. Ayadi, M. A. Rezgui1, A. Cherouat, F. Slimaniet M. T. Nasri; Contribution à la modelisation experimentale et numerique des instabilites plastiques en hydroformage des toles minces Mecanique & Industries, to appear 2010.
[72]  A. Cherouat, B. Radi, A. El Hami, The Study of the Composites Fabric's Shaping using an Augmented Lagrangian Approach, Multidiscipline Modeling in Materials and Structures, vol. 5 (2), 185-198, 2009.
[73]  El Hami, B. Radi, A. Cherouat, Treatment of the composite fabric's shaping using a Lagrangian formulation, Mathematical and Computer Modelling, vol. 49 (7-8), 1337-1349, 2009.
[74]  A. Cherouat and H. Borouchaki, Actual state of the art of composite fabric forming: geometrical and mechanical approaches, Materials, vol. 2 (4), 1835-1857, 2009.
[75]  M. Ayadi and M.A. Rezgui, A. Cherouat and N. Mezghani, Experimental and numerical study of hydroforming aptitudes of Welded Tubes, Int. J. Mechatronics and Manufacturing Systems, vol. 4(1), 74-94, 2011.
[76]  A. Cherouat, H Borouchaki & L. Giraud-Moreau, Mechanical and geometrical approaches applied to composite fabric forming, International Journal of Material Forming, DOI 10.1007/s12289-010-0692-5.
[77]  B. Radi, A. Cherouat and A. El Hami, Optimization technics to identify the characteristics of an hydroformed structure, International Journal for Simulation and Multidisciplinary Design Optimization ISSN 1779-627: 1779-6288, 2011
[78]  A. Ayadi, B. Radi, A. Cherouat and A. El Hami, Optimization and identification of the characteristics of an hydroformed structures, Applied Mechanics and Materials, 2011, In press
[79]  A. Cherouat, M. Ayadi and M.A. Rezgui, Contribution of strain hardening law coupled to damage and remeshing procedure in the localization of plastic instabilities application to hydroforming processes, International Journal for Computational Methods in Engineering Science and Mechanics, In press, 2011.
[80]  M. Ayadi, A. Cherouat, F. Slimani, M.A. Rezgui and A. Zghal, Experimental and numerical modelling of thermo-hydroforming of anisotropic thin sheet, International Journal Applied Mechanics and Materials, 2011, In press
[81]  L. Giraud-Moreau, H. Borouchaki, A. Cherouat, Adaptive remeshing techniques coupled with the projection method for sheet metal forming, International Journal Applied Mechanics and Materials, 2011, In press

Publications: Conferences/Workshops/Symposiums

[1]  H. Sabhi, J.C. Gelin, P. Boisse and A. Cherouat, Modelling of constitutive behaviour of glass fiber fabrics; Proceeding of the Second International Symposium TEXCOMP2, Ed. By I. Verpoest and F. K. KO, KU Leuven Belgium, May 1994.
[2]  J.C. Gelin, A. Cherouat, P. Boisse, and H. Sabhi, Finite element modelling of glass fiber fabric shaping processes;; Proceeding of the Second International Symposium TEXCOMP2, Ed. By I. Verpoest and F. K. KO, KU Leuven Belgium, May 1994.
[3]  A. Cherouat, P. Boisse, J.C. Gelin and H. Sabhi; Numerical simulation fiber fabric deep drawing; Proceeding of the First International Conference on Composite Engineering ICCE/1, New Orleans, 1994, 637-638.
[4]  M. Borr, A. Cherouat & J.C. Gelin, Modelling large deformations of glass fiber fabrics and applications of shaping processes; Euromech 334-Textiles Composites & Textiles Structures, P de Wilde, Brussels, May Lyon, p. 129-139, 1995.
[5]  J.C. Gelin & A. Cherouat, Modelling the glass fiber fabrics deformations processes; Simulation of Materials Processing: Theory Methods and Applications Numiform'95, Ed By Shan-Su Shen and Paul Dawson Belkema, Ithaca USA July, p. 49-58, 1995.
[6]  A. Cherouat, M. Borr & P. Boisse, Modelling of fiber fabric shaping taking into account mezzo-mechanical phenomena; Proceeding of the Second International Conference on Composite Engineering ICCE/2, New Orleans August, p. 83-84, 1995.
[7]  P. Boisse, K. Buet & A. Cherouat, Finite element of textile composite forming including the biaxial fabric behaviour; Proceeding of the Third International Conference on Composite Engineering, ICCE/3, New Orleans July, p. 123-124, 1996.
[8]  S. Belhous, A. Cherouat & J.L. Billoet, Modèle element fini bi-composant pour la simulation numerique de la mise en forme des tissus composites pre-impregnes, 2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering IDMME'98, Compiègne France, vol. 2, p. 523-530, 1998.
[9]  A. Cherouat, J.L. Billoet & S. Belhous, New Finite element approach for the simulation of shaping prepreg woven fabric, Fifth International Conference on Composites Engineering ICCE/5, Las Vegas USA, p. 181-182, 1998.
[10]  A. Cherouat & J.L. Billoet, Un modèle element fini pour la modelisation du comportement des tissus composites à resine non polymerisee lors de la mise en forme, 2ème Journees Scientifiques et Techniques en Mecanique et Materiaux, Tunisie, p. 49-56, 1998.
[11]  A. Cherouat, XL Gong & J. Lu, Methode numerique pour la caracterisation des contraintes residuelles dans les materiaux multicouches, 4ème Congrès de Mecanique du Maroc, vol. 1, p. 173-174, 1999.
[12]  A. Cherouat & J.L. Billoet, Meso-Structural Behaviour of Composite Fabric for the Simulation of Manufacturing of Thin Composite by Shaping Process, ICCM 12 Paris July, CD-ROM, n°1172, 1999.
[13]  X.L. Gong, A. Cherouat, X. J. Gong & J. Lu, Residual stress distribution and its influence on the mechanical behaviour of composite laminates, ICCM 12 Paris July, CD-ROM, n°1160, 1999.
[14]  J.L. Billoet & A. Cherouat, Mechanical and Numerical Modelling of Composite Manufacturing Processes: Deep-drawing and Laying-up of thin pre-impregnated woven fabrics, proceeding of the Inter. Conference On Advances in Materials and Processing Technologies, AMPT'99 and 16th Annual Conference On the Irish Manufacturing Committee, IMC16, Dublin Ireland, vol. 1 p. 329-346, 1999.
[15]  J.L. Billoet & A. Cherouat, Numerical Behaviour of Prepreg Woven Fabric for The Simulation of Shaping Deformation, Proceeding of Numesheet'99, The 4th Int. Conference and Workshop on Numerical Simulation of 3D sheet Forming Processes, Besancon France, vol. 1, p. 567-572, 1999.
[16]  A. Cherouat & J.L. Billoet, Computational Simulation of the Shaping Process of Reinforced Composite Fabric by the Finite Element Method, Proceeding of Numesheet'99, The 4th Int. Conf and Workshop on Numerical Simulation of 3D sheet Forming Processes, Besanccn France, vol. 1, p. 573-578, 1999.
[17]  A. Cherouat, H. Borouchaki & J.L. Billoet, Mechanical and Geometrical Approaches to Simulate the Shaping Deformation of Composite Fabric, European Congress on Computational Methods in Applied Sciences and Engineering, Barcelona September, Spain. ISBN 84-89925-70-4, 2000.
[18]  X.L. Gong, A. Cherouat, O. Sicot, & J. Lu, Determination of residual stresses in the case of composite laminate, ICRS-6 International Conference on Residual Stresses, Oxford, vol. 1 p. 368-374, 10-12, July 2000.
[19]  G. Montay, A. Cherouat, J. Lu, H. Bianchi & N. Baradel, Role of substrate nature and the spraying temperature on the residual stress distribution in plasma sprayed zirconia coating, ICRS-6 International Conference on Residual Stresses, Oxford, vol. 1, p. 407-414, 10-12, July 2000.
[20]  J.L. Billoet, H. Borouchaki & A. Cherouat, From the pre-dimensioning approach to the optimisation of forming processes of thin fabric composite parts, IDMME 2000, Montreal Canada, p. 204-205, CDRom-16-19 May 2000.
[21]  A. Cherouat, J.L. Billoet & H. Borouchaki, New numerical tools for virtual textile composite forming, The 5th International Conference on Textile Composites TEXCOMP5, Leuven Belgium, p. 123-126, 18-20 September-2000.
[22]  K. Saanouni, A. Cherouat & Y. Hammi, Numerical aspects of finite elastoplasticity with damage for metal forming, EUROMECH-417-Numerical Modelling in Damage Mechanics, Troyes France, p. 21-22, 2-4 October 2000.
[23]  G. Montay, A. Cherouat & J. Lu, Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy, International Conference Stress Evaluation MECA-SENS Reims France, p. 46-47, 13-14 December 2000.
[24]  A. Cherouat, X.L. Gong & J. Lu, Influence of the residual stresses on the mechanical behaviour of advanced composite parts, International Conference Stress Evaluation MECA-SENS, Reims France, p. 32-33, 13-14 December, 2000.
[25]  K. Saanouni, A. Cherouat & Y. Hammi, Optimization of hydroforming processes with respect to fracture, ESAFORM 2001, Liège Belguim, vol. 1, p. 361-364, 23-25 April 2001.
[26]  K. Saanouni, A. Cherouat, J.F. Mariage & K. Nesnas, On the numerical simulation of 3d forging of some complex parts considering the damage occurrence, ESAFORM 2001, Liège Belguim, Vol. 2, p. 593-596, 2001.
[27]  K. Saanouni, A. Cherouat & Y. Hammi, Numerical simulation of damage in metal forming processes, ESAFORM 2001, Liège Belguim, vol. 1, p. 225-228, 23-25 April 2001.
[28]  H. Borouchaki, A. Cherouat, J.L. Billoet & P. Luca, Integration of A new geometrical model for textile forming processes in the Quickform software, ESAFORM 2001, Liège Belguim vol. 1, p. 103-106, 23-25 23-25 April 2001.
[29]  J.L. Billoet & A. Cherouat, A specific finite element model for composite fabric forming processes, ESAFORM 2001, Liège Belguim, vol. 1, p. 139-142, 23-25 April 2001.
[30]  A. Elhami, A. Cherouat & J.L. Billoet, The frictional contact of the Shaping of the composite fabric, 5ème Congrès de Mecanique du Maroc, Meknes, vol. 1 p. 110-112, 17-20 avril 2001.
[31]  G. Montay, A. Cherouat & J.Lu, The hole drilling technique applied on complex shapes, SEM Annual Conference on Experimental and Applied Mechanics, Portland, Oregon, USA., p. 670-673, June 4-6 2001.
[32]  O. Sicot, X. Lu Gong, A. Cherouat & J. Lu, Effect of residual stresses on torque behaviour of composites laminate, ICCM-13, Beijing China, ISBN 7-9000 75-46-1, 25-29-June 2001.
[33]  A. Cherouat & H. Borouchaki, Draping simulation of woven fabric reinforced composite using optimization technique, Conference an New Trends in Design & Manufacture, Egypt, 3-7, November 2001.
[34]  P. Breitkofpf, A. Rassineux, P. Villon, A. Cherouat & K. Saanouni, Meshfree operators for consistent field transfer in large deformation plasticity, ECCM. Kracow Poland, June, 26-29, 2001.
[35]  A. Cherouat, X.L. Gong, O. Sicot & J. Lu, Simulation of residual stresses in composite laminates by the finite element method, 6th European Conference on residual stresses, Lisbone Portugal, 10-13 July 2002.
[36]  A. Cherouat, G. Montay & J. Lu, Studies of residual stresses in complex parts by the finite element method, 6th European Conference on Residual stresses, Lisbone Portugal, 10-13 July 2002.
[37]  A. Cherouat, Ph. Lestriez, J.F. Mariage and K. Saanouni, Ductile damage prediction in hydroforming processes, 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Taejon Korea, 21-25 October 2002.
[38]  A. Cherouat, H. Borouchaki, K. Saanouni, K. Nesnas and J.F. Mariage, An efficient remeshing technique in analysis of large plastic deformation, The 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Taejon Korea, 21-25 October 2002.
[39]  K. Saanouni, A. Cherouat, Ph. Lestriez and H. Borouchaki, Numerical simulation of damage in metal forming processes using Abaqus, ABAQUS World Users'Conference, Newport, Rhode Island USA, May 29-31 2002.
[40]  A. Cherouat, J.F. Mariage, Ph. Lestriez and K. Saanouni, Numerical simulation of damage in metal forming processes, 4th International Conf. on Materials Processing Defects, Cachan France, 25-26 september 2002.
[41]  A. Cherouat, K. Saanouni, Ph. Lestriez, Numerical simulation of hydroforming processes with damage occurrence, 5th International ESAFORM Conf. on Material Forming, Krakow Poland, 14-17 April, p. 695-698, 2002.
[42]  J.F. Mariage, K. Saanouni, A. Cherouat, Sheet metal cutting simulation by continuum damage mechanics, 5th International ESAFORM Conf. on Material Forming, Krakow Poland, 14-17 April, p. 575-578, 2002.
[43]  A. Cherouat, H. Borouchaki, K. Saanouni, & P Laug, Adaptive remeshing in large deformations with damage, 7th Int. Conf. On Computer Aided Assessment and Control of Damage & Fracture Mechanics, Maui Hawaii, 15-17 October, p. 549-561, 2002.
[44]  H. Borouchaki, A. Cherouat, K Sanounin et P. Laug, Schema adaptatif en mecanique des structures: application à la mise en forme des materiaux, Les quatrièmes journees scientifiques et techniques en mecanique et materiaux JSTMM'02. Monastir Tunisie 25-26 octobre 2002.
[45]  JF Mariage, K. Saanouni, P. Lestriez et A. Cherouat, Simulation numerique du forgeage d'un ecrou six pns avec prise en compte du couplage comportement endommagement dans Forge 2 et Forge 3. Les quatrièmes journees scientifiques et techniques en mecanique et materiaux JSTMM'02. Monastir Tunisie, 25-26 octobre 2002.
[46]  Y. Guo, K. Saanouni, A. Cherouat, Li, Y., Loppin, G., and K. Debray, Two methodologies for the simulation of ductile damage in sheet metal forming processes, International Symposium on Advanced Forming Technology. Beijing China, 1-6 November 2002.
[47]  J.F., Mariage, K. Saanouni, P. Lestriez et A. Cherouat, Numerical simulation of damage in metal forming processes, 4th Conference on Prediction of Defects in Material Processing, Cachan France, 24-26 septembre 2002.
[48]  P. Lestriez, K. Saanouni, J.F. Mariage, A. Cherouat, Numerical prediction of damage in metal forming processes including thermal effects, 6th international ESAFORM Conference on Material Forming, Salerno Italia, p. 715-718, 28-30 April 2003.
[49]  J.F. Mariage, K. Saanouni, P. Lestriez, A. Cherouat, Sheet metal deburring and drilling simulation by continuum damage mechanics, 6th International ESAFORM Conference on Material Forming, Salerno Italia, p. 571-574, 28-30 April 2003.
[50]  O. Sicot, G. Montay, X.L. Gong et A. Cherouat, Approche des contraintes residuelles dans les composites stratifies par la methode de la compliance. Colloque caracterisation experimentales des contraintes: techniques avancees et nouveaux materiaux. Troyes France, p.173-178, 7-8 mars 2003.
[51]  O. Sicot, X.L. Gong, A. Cherouat et J. Lu, Influence of the residual stress on the mechanical behaviour of composite laminates during monotonous tensile and torque loading. Internal stresses in polymer composite processing and service life, Euromech 453, Saint-Etienne France, 4 p., 1-3 december 2003
[52]  O. Sicot, X.L. Gong, A. Cherouat et J. Lu, Influence des paramètres experimentaux sur la determination des contraintes residuelles dans les materiaux composites stratifies. Journees Nationales des Composites, Strasbourg. 5 p., 12-14 Mars 2003.
[53]  N. Belamri, M. Khelifa,, K. Saanouni, A. Cherouat and Ph. Autesserre, Sheet metal blanking simulation using a coupled anisotropic plastic flow damage modelling, 7th International ESAFORM Conference on Material Forming, Trondheim, Norway, p. 737-740, 28-30 April 2004.
[54]  P. Lestriez, K. Saanouni, J.F. Mariage, A. Cherouat, Numerical simulation of wheel forming including thermal and damage effects, 4th European Congress on computational Methods in Applied Sciences and Engineering, Jyvaskyla Finland. 13 p. 24-28 July 2004.
[55]  L. Giraud-Moreau, H. Borouchaki, H. and A. Cherouat, New adaptive remeshing technique for the numerical simulation of thin sheet metal forming, 4th European Congress on computational Methods in Applied Sciences and Engineering, Jyvaskyla Finland. 13 p. 24-28 July 2004.
[56]  P. Lestriez, A. Cherouat, K. Saanouni, J.F. Mariage, Orthogonal metal cutting simulation by thermo-elasto-visco-plastic constitutive equations fully coupled with ductile damage, 8th International Conference on Numerical Methods in Industrial Forming Process, Columbus Etats Unis, 13-17 June 2004.
[57]  P. Lestriez, J.F. Mariage, K. Saanouni, A. Cherouat, Numerical simulation of wheel forming process with damage and thermal effects, 8th International Conference on Numerical Methods in Industrial Forming Process, Columbus Etats Unis, 13-17 June 2004.
[58]  L. Giraud-Moreau, H. Borouchaki, and A. Cherouat, Sheet metal forming using adaptive resmeshing, 8th International Conference on Numerical Methods in Industrial Forming Process, Columbus, Etats Unis., vol. 712 (1), p. 1040-1045, 13-17 June 2004.
[59]  G. Montay, O. Sicot, X.L. Gong, A. Cherouat & J. Lu, Determination of the residual stresses in composite laminate using the compliance method, 7th International Conference on Residual Stresses, Xian China, 14-17 June 2004.
[60]  A. Cherouat, H. Borouchaki, P. Laug, K. Saanouni, Numerical methodology for metal forming processes using elastoplastic model with damage occurrence, 4th International Forum on Advanced Material Science and Technology, Troyes France, 4-7 July 2004.
[61]  A. Cherouat, H. Borouchaki, P. Laug, K. Saanouni, Damage effect in metal forming process using adaptive remeshing, 7th International Conference on Computational Structures Technology, Lisbon Portugal, 7-9 September 2004.
[62]  L. Moreau, H. Borouchaki, A. Cherouat, A. Adaptive remeshing for stamping process, 7th International Conference on Computational Structures Technology, Lisbon Portugal, 7-9 September 2004.
[63]  N. Belamri, A. Cherouat, K. Saanouni and Ph. Autesserre, Simulation de refendage 3D des toles minces en utilisant le couplage de l'ecoulement plastique anisotrope avec endommagement ductile, Conference Internationale de Mecanique Avancee CIMA'04, Boumerdes, Algerie, 30 nov-2 decembre 2004.
[64]  L. Moreau, H. Borouchaki, A. Cherouat et K.Saanouni, La mise en forme de toles mince par raffinement et deraffinement adaptatifs de maillages, 1er Congrès International de Conception et Modelisation des Systèmes Mecaniques, Hammamet Tunisie 23-25 mars, 2005.
[65]  I. Ben Naceur, H. Borouchaki, A. Cherouat et J.M. Bachmann, Modelisation mecanique et simulation de la mise en forme des structures souples, 1er Congrès International de Conception et Modelisation des Systèmes Mecaniques, Hammamet Tunisie 23-25 mars, 2005.
[66]  N. Belamri, A. Cherouat, K. Saanouni and Ph. Autesserre, Numerical simulation 3D of sheet metal slitting process, 4th International Conference on Fracture and Damage Mechanics, Mallorca, Spain, 12-14 July, 6 p. 2005.
[67]  O. Sicot, O., XL. Gong, X.-L. A. Cherouat, Aging effect on residual stresses field in composite laminate. ECCM 12: 12th European Conference on Composite Materials-29 aout-1er septembre 20, 29-01 Aout 2006, Biarritz. 8 pages.
[68]  G. Montay, A. Cherouat and J. Lu, Residual stress analysis in crankshaft using the hole drilling method, 7th European Conference on Residual Stresses, Berlin 13-15 September 2006.
[69]  A. Cherouat, N. Belamri, K. Saanouni & P. Autesserre, Residual stresses in 3D sheet metal guillotining using a coupled finite elastoplastic damage model, 7th European Conference on Residual Stresses, Berlin 13-15 September 2006.
[70]  O.Sicot, X-L. Gong, X-J. Gong, A. Cherouat, Dependence between aging and residual stresses on composite laminate, 7th European Conference on Residual Stresses, Berlin 13-15 September 2006.
[71]  X.L.Gong, Y.Liu, N.Garsot, and A.Cherouat, On the compression behaviour of open-cell aluminium foams" Chinese Conference of Theoretical and Applied Mechanics 2007 (CCTAM2007), 19-23 aout 2007, Beijing, CD, N° 002187 (8 pages).
[72]  Garsot, N., Liu, Y., Cherouat, A. & Gong, X.-L. Compressive behavior of Metal Porous-Polymer Composite (MPPC): experiment and numerical simulation, Metfoam Conference on Porous Metals and Metallic Foams, 05-07 Septembre 2007, Montreal Canada. 8 p.
[73]  Liu, Y., Garsot, N., Gong, X.-L. & Cherouat, A. Experimental and numerical study of the compression behaviour of open-cell aluminium foams. First int conf. on multidisciplinary design optimization and application, 07-09 Avril 2007, Besancon. 8 p

Publications: Books/Book Chapters

[1]  Cherouat, J.L. Billoet & S. Belhous, Two-component finite element model for the simulation of shaping prepreg woven fabric, Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, p. 323-330, ISBN 0-7923-6024-9, 1999.
[2]  J.L. Billoet, H. Borouchaki and A. Cherouat, From the pre-dimensioning approach to the optimisation of forming processes of thin fabric composite parts, Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, isbn-1-4020-0978-8, 2002.
[3]  L. Giraud-Moreau, Borouchaki, H & A. Cherouat, A remeshing procedure for numerical simulation of forming processes in three dimensions, New York: Springer ISBN 3-540-34957-X, 127-143, 2006.
[4]  R. Figueredo et A. Cherouat, A new approach to couple a constitutive model for the Mullin effect with residual strain and the damage of elastomer materials, Constitutive Models for Rubber V., Ed. Taylor & Francis, 85-90, 2007.
[5]  A. Cherouat and H. Borouchaki, Advanced numerical simulation of composite woven fabric forming processes, Materials Science and Technologies, Resin Composites: Properties, Production and Applications Editors: Deborah B. Song, ISBN: 978-1-61209-129-7, 2011.