Resources and Environment

Resources and Environment focuses on introducing the current situation of resources and environment to make the broad masses of the people know the meaning and value of sustainable development as a kind of public academic journal. The current policies and related management measures designed for sustainable development will be mentioned in this journal.

Sanjay K. Gupta

Assistant Professor, Hydraulics & Water Resources Engineering Division, Department of Civil Engineering, IT, BHU, Varanasi, India

Research Areas

Open Channel Hydraulics, Dam Breach, Scouring, Hydraulic Jumps, Supercritical Flows, Analytical & Statistical Modeling, Computational Hydraulics, Pipeline Systems, Numerical Simulation, Multiphase Flow, Fluidized Conveying of Granular Matters

Education

2008Ph.D.Indian Institute of Technology Delhi
1995M.Tech.Indian School of Mines, Dhanbad
1992B.E.M. M. M. Engineering College, University of Gorakhpur, UP

Experience

2007-presentAssistant Professor, Civil Engineering, Institute of Technology, Banaras Hindu University, Varanasi, UP, India
Assistant Professor, Manav Rachna College of Engineering (ISO 9001:2000 Certified), Faridabad, Haryana; Affiliated to MD University, India
Lecturer, North Eastern Regional Institute of Science &Technology (Deemed to be University, Government of India), Itanagar, Arunachal Pradesh, India

Academic Achievement

1993 & 1994, Ph.D. Research Assistantship, Qualified GATE Examination for post graduate admission,
1988-1990, College undergraduate merit scholarship
1984-1985, Qualified State Integrated Scholarship Examination

Publications: Journals

[1]  S.K. Gupta, V.K. Agarwal, S.N. Singh, V. Seshadri and David Mills, An experimental investigation on a fluidized motion conveying system, Powder Technology (Elsevier Sciences), Vol. 167, pp.72-84, 2006 (Cited by in Scopus: 5), Journal impact factor: 1.7
[2]  S.K. Gupta, V.K. Agarwal, V. Seshadri, S.N. Singh and David Mills, Parameters affecting fluidized motion conveying of flyash, Particulate Science and Technology (Taylor & Francis), Vol. 27, pp. 469-487, 2009, (Cited by in Scopus:2), Journal impact factor: 0.5
[3]  S.K. Gupta, V.K. Agarwal, V. Seshadri, S.N. Singh, David Mills, J. Singh, C. Prakash, Prediction of minimum fluidizing velocity for fine tailings materials, Powder Technology (Elsevier Sciences), Vol. 196, 263-271, 2009 (Cited by in Scopus: 2), Journal impact factor: 1.7
[4]  S. Chandrasekaran, S.K. Gupta, Federico Carannante, Design aids for open barrel reinforced concrete cylindrical shells, International Journal of Engineering, Science and Technology 1, 148-171, 2009
[5]  S.K. Gupta, V.K. Agarwal and David Mills, A model for fluidized mode conveyor transporting fly ash, Experimental Thermal and Fluid Science (Elsevier Sciences), Vol.34, 1042-1048, 2010; Journal impact factor: 1.3
[6]  J. Singh, S.K. Gupta, S. Chandrasekaran, Computational treatment of free convection effect on flow of elastico-viscous fluid past an accelerated plate with constant heat flux, Applied Mathematics and Computation (Elsevier Sciences), Vol. 217, 685-688, 2010, Journal impact factor: 1.2
[7]  S.K. Gupta, V.P. Singh, U. Mishra, Discussion of scour due to crossing jets at fixed vertical angle, Journal of Irrigation and Drainage Engineering, American Society of Civil Engineers (ASCE), doi: 10.1061/(ASCE)IR.1943-4774.0000390, 2011, In press, Journal impact factor: 1.6
[8]  S.K. Gupta, V.P. Singh, Discussion of enhanced predictions for peak outflow from breached embankment dams, Journal of Hydrologic Engineering, American Society of Civil Engineers (ASCE), doi: 10.1061/(ASCE)HE.1943-5584.0000470, 2011, In press, Journal impact factor: 1.28
[9]  S.K. Gupta, V.P. Singh, S.K. Shukla, Discussion of iterative formulas and estimation formulas for computing normal depth of horseshoe cross-section tunnel, Journal of Irrigation and Drainage Engineering, American Society of Civil Engineers (ASCE), doi:10.1061/(ASCE)IR.1943-4774.0000370, 2011, In press, Journal impact factor: 1.6
[10]  S.K. Gupta, V.P. Singh, V.B. Mishra, Design and testing of a flow measurement system for an urban sewage drain, Journal of Irrigation and Drainage Engineering, American Society of Civil Engineers (ASCE), doi: 10.1061/(ASCE)IR.1943-4774.0000445, 2011, In press, Journal impact factor: 1.6
[11]  S.K. Gupta, V.P. Singh, V.B. Mishra, Discussion of temporal development of scour holes around submerged stream deflectors, Journal of Hydraulic Engineering, American Society of Civil Engineers (ASCE), doi: 10.1061/(ASCE)HY.1943-7900.0000513, 2011, In press, Journal impact factor: 1.4
[12]  S.K. Gupta, V.P. Singh, Discussion of most hydraulically efficient riprap-lined drainage channels, Journal of Irrigation and Drainage Engineering, American Society of Civil Engineers (ASCE), doi: 10.1061/(ASCE)IR.1943-4774.0000447, 2011, In press, Journal impact factor: 1.6
[13]  S.K. Shukla, V. P. S. Sorayan, S.K. Gupta, Parametric studies of passive/active solar stills by using modified convective mass transfer relations, International Journal of Ambient Energy (Taylor & Francis), Vol. 25, No. 4, pp. 212-220, 2004; Journal impact factor: 0.5
[14]  S.K. Gupta, V.K. Agarwal, V.P. Singh, Modeling the ultra dense phase transport of granular material through enclosed channels, Journal of Pipeline Systems Engineering & Practice, American Society of Civil Engineers (ASCE), doi: , 2011, Submitted on Jan. 15, 2011 and presently Under Review
[15]  S.K. Gupta, V.P. Singh, Discussion of supercritical flow over a dentated sill, Journal of Hydraulic Engineering, American Society of Civil Engineers (ASCE), 2011, Under Review, Journal impact factor: 1.4

Publications: Conferences/Workshops/Symposiums

[1]  S.K. Gupta, Fluidized mode transportation of particulate solids, The Fourth Asian Particle Technology Symposium, Process Engineering Innovation Lab, Tata Research Development & Design Centre, New Delhi, India, September 14-16, 2009
[2]  S.K. Gupta, V.K. Agarwal, V. Seshadri, S.N. Singh, J. Singh, Incipient Fluidizing Velocity for Tailings Materials, The Fourth Asian Particle Technology Symposium, Process Engineering Innovation Lab, Tata Research Development & Design Centre, Ashoka Continental, New Delhi, September 14-16, 2009
[3]  S.K. Gupta, V.K. Agarwal, V. Seshadri, S.N. Singh, David Mills and J. Singh, Investigation on minimum fluidizing velocity correlations using tailings materials, 6th International conference on conveying and handling of particulate systems, Brisbane, Australia, August 3-7, 2009 (could not be presented)
[4]  S. K. Shukla and S.K. Gupta, Performance evaluation of concentrating solar cooker under Indian climatic conditions, Proc. Energy Sustainability, American Society of Mechanical Engineers (ASME), Florida, USA, 2008
[5]  S.K. Gupta, V.K. Agarwal, V. Seshadri, S.N. Singh and David Mills, Investigations into the factors influencing the fluidized motion conveying of flyash, Proc. of 5th International conference on conveying and handling of particulate systems, Sorrento, Italy, 2006
[6]  S.K. Gupta, V. Seshadri, S.N. Singh, V.K. Agarwal, Effect of conveying distance on the characteristics of fluidized motion conveying system, Proc. of FMFP, 31st National Conference on Fluid Mechanics and Fluid Power, Vol. 2, pp. 903-910, Kolkata, India, 2004
[7]  S.K. Gupta, P.C. Srivastava, P. Singh and T. Welly, Investigation into the hydraulic conductivity of conjoined triangular soil bed, National Seminar on Land Resource Management for Sustainable Development, SLUB Publication No. 20 (Govt. of Arunachal Pradesh), pp. 29- 40, Itanagar, Arunachal Pradesh, 2006
[8]  P.C. Srivastava, S.K. Gupta, P. Singh and T. Welly, Water balance study of Tawang district for optimizing land use, National Seminar on Land Resource Management for Sustainable Development, SLUB Publication No. 20 (Govt. of Arunachal Pradesh), pp. 45-54, Itanagar, Arunachal Pradesh, 2006