American Journal of Polymer Science

American Journal of Polymer Science has provided a continuous forum for the dissemination of thoroughly peer-reviewed, fundamental, international research into the preparation and properties of macromolecules. The journal is selective in accepting contributions on the basis of merit and originality. Preference is given to contributions that offer new or more comprehensive concepts, interpretations, experimental approaches, and results.


Mohamed Bakar

Editorial Board Member of American Journal of Polymer Science

Associate Professor, Technical University of Radom, Poland

Research Areas

Modification of Polymers, Mechanical Properties and Structure Analysis of Polymers

Education

1986Ph.DMacromolecular Science Department, Case Western Reserve leveland, USA
1976MasterPolymers Department-Technical University of Prague

Experience

1996-2011Technical University of Radom , Poland (Head of Polymers department)
1979-1995 Plastics and Rubber Engineering Department (Algerian Institute of Petroleum) Boumerdes-Algeria

Publications: Conferences/Workshops/Symposiums/Journals/Books

[1]  Mascia L., Bakar M., "Viscoelastic Dissipations in The Fracture of Glassy Polymers Near Their Glass Transition Temperature", Polymer Engineering and Science, (1981) 21, 577.
[2]  Bakar M., Chudnovski A., Moet A., "On The Constancy of The Specific Enthalpy of Fracture", Journal of Materials Science, (1988) 23, 2321.
[3]  Cizravi J.C., Benammar R., Bakar M.,"Apraisal of Recycled Reprocessed and Aged Agricultural Films" Journal of Plastic Film & Sheeting, (1989) 5, 251.
[4]  Boussenane M., Bakar M., Plochocki A.P., "Effect of The Viscosity Ratio, Composition and Enhancement of Interface on Melt Rheology And Concomitant Morphology of Model Polyalloy", Journal Of Thermoplastic Composite Materials, (1990) 3 ,150.
[5]  Yilmazer U., Bakar M., Kioul A., "Development of Thermal Films For Greenhouse Applications Using Long Infrared Radiations Absorbers" Journal of Plastic Film And Sheeting, (1991) 7, 43.
[6]  Bakar M., Hamadi B., Rahma R., "Natural and Artificial Weathering of Low Density Polyethylenre Based thermal films", Journal of Applied Polymer Science: Polymer Symposia, (1994) 55, 25.
[7]  Harani H., Fellahi S., Bakar M., "Toughening of Epoxy Resins Using Synthesized polyurethane prepolymer based on hydroxyl terminated polyesters" Journal of Applied Polymer Science, (1998) 70, 2603.
[8]  Harani H., S. Fellahi, Bakar M.,"Toughening of Epoxy Resins Using Hydroxyl Terminated Polyesters" , Journal of Applied Polymer Science, (1999) 71, 29.
[9]  Fellahi S., Chikhi N., Bakar M., "Modification of Epoxy Resins With Kaolin as a Toughening Agent", Journal of Applied Polymer Science, (2001) 82 , 861.
[10]  Chikhi N., Fellahi S., Bakar M. , "Modification of Epoxy Resin Using Reactive Liquid (ATBN) Rubber ", European Polymer Journal , (2002) 38, 251.
[11]  Bakar M., Kostrzewa M., Janiszek M., Borkowska K., "Properties of Epoxy Based Hybrid Composites", Materials Science (MEDŽIAGOTYRA), (2005) 11, 129.
[12]  Bakar M., Djaider F., "Effect of Plasticizers Content on The Mechanical Properties of Unsaturated Polyester Resin "Journal of Thermoplastic Composite Materials, (2007) 20, 53.
[13]  Bakar M., Kobusińska J., Szczerba J., "Mechanical Properties of Epoxy Resin Modified with Polycarbonate and Reactive Polybutadiene" Journal of Applied Polymer Science, (2007), 106, 2892 .
[14]  Bakar M., Wojtania I., Legocka I., Gospodarczyk J., "Property Enhancement of Epoxy Resins by Using a Combinaton of Polyamide and Montmorillonite", Advances in Polymer Technology, (2007) 26(4), 223.
[15]  Bakar M., Skrzypek K., "Effect of Kaolin and Polyurethane on the Thermaland Mechanical Properties of Epoxy based Compositions" Materials Science (MEDŽIAGOTYRA) , (2007) 13, 39.
[16]  Bakar M., Duk R., Przybyłek M., Kostrzewa M., "Mechanical and Thermal Properties of Epoxy Resin Modified With Polyurethane", Journal of Reinforced Plastics and Composites, (2009) 28, 2107.
[17]  Rudecka J., Pawłowa M., Bakar M., Piasta Z., " Multicriteria Analysis of Tanned Leathers Performance Properties", J. Soc.Leather Technol. Chem., (2009), 93 (4) , 162.
[18]  Bakar M, Kostrzewa M. , " Effect of Glass Beads and Polyurethane on the Fracture Properties of Epoxy Resin", Journal of Thermoplastic Composite Materials, (2010), 23 (6), 749.
[19]  Bakar M., Szymańska J., Rudecka J., Fitas J., "Effect of Reactive Diluents and Kaolin on the Fracture Toughness of Epoxy Resin", Polymers & Polymer Composites, 2010, 18(9), 469.
[20]  Kostrzewa M., Hausnerová B., Bakar M., Sar K." Preparation and Properties Evaluation of Nanocomposites Based on Polyurethane Modified epoxy/Montmorillonite Systems", Advances in Polymer Technology, 2010, 29(4), 237.
[21]  Bakar M., Kostrzewa M., Okulska-Bożek M. Jacewicz E.,"Mechanical and morphological properties of polycarbonate and montmorillonite filled epoxy hybrid composites", Journal of Applied Polymer science, 2011, 119(2), 752.
[22]  Kostrzewa M., Hausnerová B., Bakar M., Siwek E." Effect of Various Polyurethanes on the Mechanical and Structural Properties of Epoxy Resin", Journal of Applied Polymer science, 2011, 119 (5), 2925.
[23]  Kostrzewa M., Hausnerova B., Bakar M., Dalka M." Epoxy Resin Modified with Polyurethanes Based on MDI and Polydiols with Different Molecular Weights" Journal of Applied Polymer science, 2011, 22(3), 1722.
[24]  Kostrzewa M., Hausnerova B., Bakar M., Pająk K. "Preparation and characterization of an epoxy resin modified by a combination of MDI based Polyurethane and Montmorillonite", Journal of Applied Polymer science, 2011, 122(5), 3237.
[25]  Bakar M., Okulska-Bożek M., Zygmunt M., "Effect of Polyamic Acid and Polyimide on the Adhesive Strength and Fracture Toughness of Epoxy Resin", Materials Science, accepted for publication.
[26]  Bakar M., Białkowska A., Molenda J., Piasek J. "Properties enhancement of epoxy resin by using a combination of a thermoplastic and nanoclay" Journal of Macromolecular Science, Part B, Polymer-Physics. Online 6 october 2011-DOI: 10.1080/00222348.2011.625906.
[27]  Bakar M., Białkowska A., Szymanska J., "Synthesis and Evaluation of Mechanical and Thermal Properties of Segmented Condensation Polyurethanes" Plastics, Rubber and Composites (accepted for publication).
[28]  Przybyłek M., Włoskowicz I., Bakar M. "Właściwości reologiczne materiałów przeznaczonych do produkcji pakietów materiałowych na bazie dzianin futerkowych", Przegląd Włókienniczy (In polish) (2006) 3, 34.
[29]  Przybyłek M., Bakar M., Latała K. "Badania właściwości wytrzymałościowych i lepkosprężystych laminatów odzieżowych" Przegląd Włókienniczy (In polish) (2008) 4, 47.