International Journal of Energy Engineering

International journal of Energy Engineering is an open access, peer-reviewed scientific journal that publishes original articles, critical reviews, research notes, debate and short reports in all areas of energy engineering.

Brian Agnew

Editorial Board Member of International Journal of Energy Engineering

Professor, Northumbria University, UK

Research Areas

Thermal Systems

Education

1981Ph.D"An Experimental and Theoretical Examination of the Combustion Processes in a Reciprocating, Spark Ignition, Internal Combustion Engine" The City University, London
1974M.Sc"Internal Combustion Engineering" Kings College, London University
1972B.Sc"Mechanical Engineering" Brunel University

Experience

2009-presentThe School of the Built Environment, Northumbria University. Professor of Energy and the Environment, Head of City and Subway Climatology Group
1985-2009The School of Mechanical and Systems Engineering, Newcastle University. Visiting Professor, Reader in Thermal Systems, Senior Lecturer, Lecturer, Head of Thermo-fluids Division, Head of Power and Transmissions Research Group

Membership

Fellow of the Institution of Mechanical Engineers 1997, Member 1981 Chartered Engineer, 1981
European Engineer, 1989
Member Stowarzyszenia Inzynierow i Technikow Mechanikow Polskich, (SIMP), 1996
Member of the EPSRC Peer Review College, 2002, ongoing
Chair of the N.E.Region Institution of Mechanical Engineers, 2008-2010
Member of Strategy Board, Institution of Mechanical Engineers, 2008
Member of Council, Institute of Mechanical Engineers, 2008-2010
Committee Member of the North East Branch of the Institution of Mechanical Engineers 1987-2011, Branch Treasurer, 1991-1998 and 2004-2008
Chair of the I.Mech.E. Membership Review Panel 1995, ongoing

Publications: Conferences/Workshops/Symposiums/Journals/Books

[1]  "Turbulent Flame Propagation in a Spark Ignition Internal Combustion Engine". Agnew B., Hayward B. M. Int. Conf. Spark Ignition Engines, Wroclaw, Poland, 1986 pp.67-74. (P) [80] (RCP).
[2]  "Criteria for Flame Propagation Limits in Spark Ignition Internal Combustion Engines". Agnew B., Hayward B. M. Int. Conf. Spark Ignition Engines, Wroclaw, Poland, 1986 pp.75-82. (P) [80] (RCP).
[3]  "An Examination of the use of a Variable Compression Ratio Piston in a Spark Ignition Engine". Agnew B., Palmer D., Tam I. I.Mech.E. Seminar on the Practical Limits of Efficiency of Engines, 1986 pp.77-84. (P) [60] (RCP).
[4]  "The Influence of Swirl on Flame Propagation in a Spark Ignition Engine". Agnew B., Chan C. L., Tam I. 11th Int.Coll. Dynamics of Explosions, Warsaw, 1987 pp. 273-281 (P) [70] (RCP).
[5]  "An Examination of the Heat Transfer Characteristics of Oxygen-Methane Flames to Axis-symmetric Work Pieces as used in Flame Hardening Techniques". Agnew B., Frost T. H. I.Mech.E. 2nd. UK. National Conference on Heat Transfer, 1988 pp.1183-1200 (P) [85] (RCP).
[6]  "Data Acquisition System and Instrumentation for Monitoring Lean Burn Combustion in a Spark Ignition Engine". Agnew B., Tam I. I.Mech.E. Seminar on Methods in Engine Research and Development, 1988 pp.119-126 (P) [60] (RCP).
[7]  "The Influence of Swirl and Fuel Type on Mass Burning Rates in a Spark Ignition Engine". Agnew B., Chan C. L., Tam I. I.Mech.E. Conference Combustion in Engines, 1988 pp.35-43. (P) [70] (RCP).
[8]  "Lean Burn Studies in a Spark Ignition Engine". Agnew B. I.Mech.E. Conference Internal Combustion Engine Research, 1991. (RCP).
[9]  "Optimisation for Joule-Brayton Gas Turbine Cycles". Agnew B., Anderson A., Frost T. H. Proc. I Mech E, Vol. 206 1992 pp.283-288. (C) [40] (RA).
[10]  "An Experimental Study of the Influence of Swirl on the Cyclical Variation of a Lean Burn Spark Ignition Engine". Agnew B., Tam I. C. K. Presented to a Special Meeting of the Korean Society of Automobile Engineers, Seoul, Korea. June 1993. 1993 Proc. K.S.A.E. (P) [75] (RA).
[11]  "Fuel Composition Effects on Combustion in a Lean-Burn Spark Ignition Engine". Agnew B., Hickman D.G. SAE Conference on Vehicle Thermal Management Systems, March 1993 pp.137-146. (P) [60] (RCP).
[12]  "A Theoretical Investigation of the Utilisation of a Diesel Engine Exhaust Waste Heat for Air Conditioning and Cooling Purposes". Agnew B., Atan R., Mostafavi M. I.Mech.E. Conference on Combined Heat and Power C495/004/94, 159-172 1994. (P) [80] (RCP).
[13]  "Cycle Optimisation and Comparison of Ideal Thermal Cycles at Maximum Specific Output". Agnew B., Anderson A., Frost T. H. The International Journal of Engineering Education, V22 No 3 pp. 177-190 1994 (P) [95] (RA).
[14]  "Thermal and Fluid Dynamic Effects of Transient Processes of a Turbocharged Diesel Engine". Agnew B., Ma J. Paper 941731 presented at the SAE International Off-Highway and Power-plant Congress and Exposition, September 1994. (C) [60] (RCP).
[15]  "Numerical Solution and Study of Thermal Effects of Transient Processes of a Turbocharged Diesel Engine", Agnew B., Ma J. In Transient Performance of Engines, I.Mech.E Publication. Oct 1994. (C) [50] (RA).
[16]  "An Examination of a Combined Diesel-Absorption Cycle for Cooling and Air Conditioning". Agnew B., Dalichaouch M., Mostafavi M., Sroka Z., Ventouris D. The 20th International Scientific Conference of Combustion Engines, Lublin, Poland. September 1994 pp393-405. (P) [55] (RCP).
[17]  "An Examination of the Feasibility of Charge Air Cooling of Diesel Engines Using the Engine Exhaust Gases". Agnew B., Mostafavi M. SAE/I.Mech.E Vehicle Thermal Management Systems Conference London May 1995. (P) [70] (RCP).
[18]  "A Study of an Automotive Vapour Compression Air Conditioning System". Agnew B., Atan R. SAE/I.Mech.E Vehicle Thermal Management Systems Conference C496/015/95. pp. 141-148. May 1995. (P) [70] (RCP).
[19]  "Latest Automotive Air-Conditioning System with No Moving Parts". Agnew B., Atan R. Journal of the Institution of Engineers of Malaysia, 6, 1995 pp18-20.(C) [50] (RA).
[20]  "A Theoretical Study of the Emissions of Nitrogen Oxides and Unburned Hydrocarbons during the Transient Processes of a Turbocharged Diesel Engine". Agnew B., Ma J. 1st International Conference on Urban Transport and the Environment in the 21st Century, June 1995. (P).
[21]  "Numerical Prediction and Improvement of the Acceleration Performance of a Rotary Engine". Agnew B., Ma J., Allen R., Bowen R. I.Mech.E Paper C498/040, Autotech, November 1995. (C) [50] (RCP).
[22]  "The Impact of Ambient Temperature on Lithium-Bromide Absorption Machine Performance". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering, June 1996, V 16, No.6, pp.515-522 (C) [50] (RA).
[23]  "The Effect of Ambient Temperature on the Surface Area of Components of an Air Cooled Lithium Bromide Absorption Unit". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering, April 1996, Vol. 16, No 4, pp.313-321. (C) [50] (RA).
[24]  "Thermodynamic Analysis of Charge Air Cooling of Diesel Engines by the Exhaust Gases Operated Absorption Refrigeration Unit-Supercharged Engine with Combined Pre and Inter-Cooling". Agnew B., Mostafavi M. Proceedings of the Second International Conference of Mechanical Engineering, Shiraz University, Iran, May 1996 pp. 427-433. (C) [50] (RCP).
[25]  "Thermodynamic Analysis of Combined Diesel Engine and Absorption Refrigeration Unit: Supercharged Engine". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering, June 1996, Vol. 16, No 6, pp.509-521. (C) [50] (RA).
[26]  "Thermodynamic Analysis of Combined Diesel Engine and Absorption Refrigeration Unit: Turbocharged Engine with inter-Cooling". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering Sept. 1996 Vol. 16, No 8/9, pp.733-740. (C) [50] (RA).
[27]  "Thermodynamic Analysis of Combined Diesel Engine and Absorption Refrigeration Unit: Turbocharged Engine". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering Oct. 1996 Vol. 16, No 10, pp.845-850. (C) [50] (RA).
[28]  "Thermodynamic Analysis of Combined Diesel Engine and Absorption Refrigeration Unit: Supercharged Engine with Inter-Cooling". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering, Nov. 1996, Vol. 16, No 11, pp.921-930. (C) [50] (RA).
[29]  "The Transient Processes of a Turbocharged Diesel Engine", Agnew B., Sroka Z. In Off Road Machines in Theory and practice, Edd. P. Dudzinski, H Hawrylak; International Society for Terrain Vehicle Systems. ISBN 83-906518-0-7. 1996. (C) [75] (RA).
[30]  "A Study of the Transient performance of a Turbocharged Diesel Engine". Agnew B., Sroka Z. Presented at the International Symposium on Off-Road Machines and Vehicles in Theory and Practice, Wroclaw, Poland September 1996. (C) [70] (RCP).
[31]  "Thermodynamic Analysis of Combined Diesel Engine and Absorption Refrigeration Unit: Naturally Aspirated Engine". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering, May 1997, Vol. 17, No 5. pp. 471-478. (C) [50] (RA).
[32]  "Thermodynamic Analysis of Combined Diesel Engine and Absorption Refrigeration Unit: Naturally Aspirated Engine with Pre-Cooling". Agnew B., Mostafavi M. Journal of Applied Thermal Engineering, June 1997, Vol.17, No 6. pp. 593-599. (C) [50] (RA).
[33]  "Optimisation of a Steady Flow Carnot Cycle with External Irreversibilities for Maximum Specific Output". Agnew B., Anderson A., Frost T. H. Journal of Applied Thermal Engineering, Jan. 1997, Vol. 17, No 1. pp. 3-15, (P) [75] (RA).
[34]  "The Transient Process of a Turbocharged Diesel Engine". Agnew B., Sroka Z. Journal of KONES, Vol. 2, 1, pp.9-17, 1997. (P) [65] (RA).
[35]  "A Hybrid Gas Turbine Cycle (Brayson/Ericsson) an Alternative to Conventional Combined Gas and Steam Power Plant". Agnew B., Anderson A., Frost T. H. I.Mech.E. Proc. Part A Vol. 211. pp. 121-131, 1997. (C) [40] (RA).
[36]  "Thermodynamic Analysis of Charge Air Cooling of Diesel Engine by an Exhaust Driven Absorption Refrigeration Unit. Turbocharged Engine with Combined Pre and Inter Cooling". Agnew B., Mostafavi M. I Mech E/SAE VTMS3 Conference May 1997. (C) [60] (RCP).
[37]  "Thermodynamic Analysis of Turbocharged Spark Ignition Engine (Otto Cycle)-Part 1-Heat Energy Available in the Exhaust Gases". Agnew B., Mostafavi M. I.Mech.E/SAE VTMS3 Conference May 1997. (C) [60] (RCP).
[38]  "Thermodynamic Analysis of Combined Open-Cycle Twin Shaft Gas Turbine (Brayton Cycle) and Exhaust Operated Absorption Unit, Part 1 Heat Energy Available in the Exhaust Gases". Agnew B., Alaktiwi A., Mostafavi M. Proceedings of the Int. Conf. on Heat Driven Cycles, pp.443-452, September 1997. (C) [60] (RCP).
[39]  "Thermodynamic Analysis of Combined Open Cycle Twin Shaft Gas Turbine (Brayton Cycle) and Exhaust Operated Absorption Unit, Part 2, The feasibility of Charge Air Cooling". Agnew B., Alaktiwi A., Mostafavi M. Proceedings of the Int Conf on Heat Driven Cycles, pp.443-452, September 1997. (C) [60] (RCP).
[40]  "Combined Power and Cooling, An Analysis of the Combined Diesel-Absorption Cycle". Agnew B., Mostafavi M., Talbi M. Presented at the International Conference on Energy and the Environment October 1997. (C) [75] (RCP).
[41]  "Thermodynamic Analysis of Combined Gas Turbine and Absorption Refrigeration Unit", Agnew B., Alaktiwi A., Mostafavi M. Journal of Applied Thermal Engineering, Aug. 1998, Vol. 18, pp.847-856. (C) [60] (RA).
[42]  "A Finite-time Analysis of an Ideal Absorption Refrigeration Cycle", Agnew B., Anderson A., Frost T.H., Tozer R. "Advances in Finite Time Thermodynamics" Edd. Professor C. Wu, Nova Science Publishing Company, May 1999 (P) [80] (ICB).
[43]  "Combined Power and Cooling, An Analysis of the Combined Diesel-Absorption Cycle", Agnew B., Talbi M., Mostafavi M. Journal of Applied Thermal Engineering, Aug. 1999, Vol. 19. pp. 1097-1105 (C) [50] (RA).
[44]  "Optimisation of Ideal Absorption Cycles with External Irreversibilities", Agnew B., Tozer R. International Sorption Heat Pump Conference, Munich, March 1999 (P) [60] (RCP).
[45]  "The Design of Engine Characteristics for Vehicle Use". Agnew B. Chapter in "An Introduction to Modern Vehicle Design" Butterworth-Heinemann, July 2001 (ICB).
[46]  "Energy and Exergy Analysis of Combined Diesel Engine and Absorption Refrigeration Unit", Agnew B., Talbi M. International Sorption Heat Pump Conference, Munich, March 1999 (C) [50] (RCP).
[47]  "An Experimental and Theoretical examination of the Operating Characteristics of an Air cooled Lithium-Bromide/Water Absorption Refrigeration Machine". Agnew B., Alaktiwi A. Conf. on Industrial Heat Engineering Vol. 21 No 2-3 1999. (C) [50] (RA).
[48]  "Studies on the Performance of an Absorption Cooling Machine". Agnew B., Alaktiwi A. Presented at the Third Jordan Mechanical and Industrial Engineering Conference, Oman, Jordan May 1999. (C) [50] (RCP).
[49]  "Exergy Analysis: an Absorption Refrigerator Using Lithium Bromide and Water as the Working Fluids", Agnew B., Talbi M. Journal of Applied Thermal Engineering, July 2000 Vol. 20. pp.619-630 (C) [50] (RA).
[50]  "Energy Recovery from Diesel Engine Exhaust Gases for Performance Enhancement and air Conditioning", Agnew B., Talbi M. Presented at the Int. Conf. on Heat Driven Cycles September 2001. (C) [70] (RA)
[51]  "Optimisation of an Ideal Absorption Refrigeration System", Agnew B., Anderson A., Fisher E. H., Potts I. Exergy, The International Journal, Vol. 2, No3. 2002, pp.186-191. (P) [95] (RA)
[52]  "Energy Recovery from Diesel Engine Exhaust Gases for Performance Enhancement and Air Conditioning", Agnew B., Talbi M., Applied Thermal Engineering. Vol. 22, pp 693-702. 2002. (C) [75] (RA)
[53]  "Optimisation of an Air-cooled Hybrid Gas Turbine Cycle (Brayton/Ericsson)", Agnew B., Frost T. H., Anderson A., Potts I. I Mech E Proceedings, Vol. 217, 2003, Part A: J. Power and Energy, pp 233-238. (P) [95] (RA)
[54]  "Simulation of Combined Brayton and Inverse Brayton Cycles", Agnew B., Anderson A., Potts I., Alabdoadaim A., Applied Thermal Engineering, June 2003, Vol. 23, pp 953-963. (P) [95] (RA).
[55]  "Simulation of a Combined Rankine-Absorption Cycle", Agnew B., Alaktiwi A, Anderson A, Potts I, Applied Thermal Engineering, July 2004, Vol. 24, pp 1501-1511. (P) [95] (RA).
[56]  "A Comparison of the Performance of Alternative Refrigerants", Agnew B., Halimic E., Ross D., Potts I., Applied Thermal Engineering, August 2003, Vol. 23, pp.1441-1451. (P) [95] (RA)
[57]  "An Examination of the Performance Envelope of a Combined Rankine, Brayton and two Parallel Inverse Brayton Cycles", Agnew B., Alabdoadaim M.A., Alaktiwi A. I. Mech. E. Proceedings, Vol. 218, Part A: J. Power and Energy, pp 377-385, 2004, (C)[65](RA).
[58]  "A Finite Time Analysis of A Cascade Refrigeration System using Alternative Refrigerants". Agnew B., Ameli. S.M., Applied Thermal Engineering, October 2004, Vol. 24, pp.2557-2565. (P) [85] (RA).
[59]  "Evaluation of an Energetic System Consisting of Brayton, Inverse Brayton and Absorption Cycles". Agnew B., Alabdoadaim M.A., Presented at the 3rd. Int. Conf. on Heat Driven Cycles. October 2004. (C) [55] (RCP).
[60]  "Simulation of a Brayton-Absorption Cogeneration Cycle", Agnew B., Betelmal E., Presented at the 3rd.Int. Conf. Heat Driven Cycles. October 2004. (C) [55] (RCP).
[61]  "Simulation of Distributed Energy Systems" Agnew B., Ameli S.M. Presented at the 3rd. Int. Conf. Heat Driven Cycles, October 2004. (C) [65] (RCP).
[62]  "Road Map, Integrated Distributed Energy Systems (IDES) Computerised Analysis and Know-how" Agnew B., Ameli S.M. Presented at IMEC2004, December 2004. (C)[60](RCP).
[63]   "Thermo-Economic Analysis of a Free Gas Turbine-Absorption Cogeneration Cycle", Agnew B., Betelmal E., Archives of Thermodynamics, Vol. 26. pp73-85, 2005. (C)[65] (RA).
[64]  "Thermo-Economic Analysis of a Gas Turbine-Absorption System", Agnew B., Betelmal E. Presented at the XIX National Congress of Thermodynamics, Sopot, Poland September 2005. (C) [55] (RCP).
[65]   "An Examination of the Performance of an Unconventional Combination of Rankine, Brayton and Inverse Brayton Cycles" Agnew B., Aladoadaim M.A., Potts I., IMechE Proceedings Part A Journal of Power and Energy, Vol. 220, 2006, pp 305-313. (P) [85] (RA).
[66]  "Performance Analysis of Combined Brayton and Inverse Brayton Cycles and Developed Configurations", Agnew B., Alabdoadaim M.A., Potts I, Applied Thermal Engineering, October 2006, Vol. 26, pp1448-1454. (P) [85] (RA).
[67]   "Some Characteristics/Properties of Croton Megalocarpus (Musine) Seed as a Source of Biodesel", Agnew B., Aliyu B., Presented at 2006 Heat Powered Cycles Conference, September 2006. (C) [50] (RCP).
[68]   "A Simulation Model of Integrated Distributed Energy Systems" Agnew B., Ameli S.M. Applied Thermal Engineering, Vol. 27, No 13, 2007. (P) [75] (RA).
[69]  "Applied Thermal Engineering, Special Issue" Agnew B., Criotoph R., Eames W., Karayiannis G. Editors: Heat Powered Cycles Conference, Applied Thermal Engineering Vol. 27 No13, 2007. (C) [40] (RA).
[70]  "Utilisation of Waste Heat in a LT-MED Desalination Plant and an Absorption Chiller to Produce Low Cost Freshwater and Cooling Effect and to Stabilise the Ambient Temperature Fluctuation", Agnew B., Al-Zahrani K, Submitted to Applied Thermal Engineering, December 2008. (C) [55] (RA).
[71]   "Subway Climatology in Newcastle upon Tyne", Agnew B., Brune M., Killing M., Pflitsch A., Sleiling B., Presented at the 7th International Conference Urban Climate, Yokohama, Japan, July 2009. (C) [30] (RCP).
[72]  "Development of Miniature Vapour Compression Refrigeration Systems for Electronic Cooling", Davies G., Eames I.W., Bailey P.B., Dadd M.W., Janieszewski A., Stone C.R., Maidment G.G. Agnew B., Interpack Conference 2009. (C) [60] (RCP).
[73]  "Improvement of the Single Shaft Combined Cycle Gas Turbine Power Plant by Intake Air Cooling using an Absorption Cooler" Agnew B., Bughazem M. Talbi M., 2009 Heat Powered Cycles Conference. (C) [60] (RCP).
[74]  "Simulation of Water and Air Cooled Lithium Bromide Chillers Powered by Low Temperature Geothermal Heat Source at Arid Zone Area, " Agnew B, Masheiti S., 2009 Heat Powered Cycles Conference. (C) [80] (RCP).
[75]  "The Effects of Coolant temperature and Low Energy Source on Various Cycle Parameters of Single Effect LiBr-H2O Absorption Chillers". Masheiti S., Agnew B., Atan R. ICADME2009. (C) [70] (RCP).
[76]  "Boiling flows in Porous Media" Agnew B., Janiszewski A., 4th Int. Conf Applications of Porous Media, 2009. [50] (RCP).
[77]  Effect of Microchannel Size, Heat Flux and Mass Flux on Flow Boiling Heat Transfer. Halimic E., Mullen D., Agnew B., 11th UK Heat Transfer Conference, 2009. (C) [50] (RCP).
[78]  "Superheated Outlet Flow from Porous Media Evaporator, " Janiszewski A., Agnew B., Bailey P. B., Dadd M., Stone C. R., Davies G. F., Eames I. W., Maidment G. G. 11th UK Heat Transfer Conference. (C) [50] (RCP).
[79]   "Untersuchungen von Luftstromingen und Temperaturehaltnissen im U-Bahn-System von Newcastle upon Tyne G.B." Steling B., Pflitsch A., Killing-Heinz M., Agnew B. Annual Meeting of Climate Working Group, German Research Society, November 2009. (C) [35] (RCP).
[80]  "Utilisation of a Low Temperature Geothermal Heat Source for Power Generation, " Masheiti S., Agnew B. Presented at ICEGES, June 2009. (C) [65] (RCP).
[81]  "Croton Megalocarpus (Musine) Seeds as a Potential Source of Bio-Diesel", Agnew B., Aliyu B., Shitanda D., Bio Mass and Bio Energy, Vol. 34, pp1495-1499, 2010. (C) [60] (RA).
[82]  "Performance enhancement of Conventional Combined Cycle Power Plant by Inlet Air Cooling, Intercooling and LNG Cold Energy Utilisation". Shi X., Agnew B., Che D., Applied Thermal Engineering, 30, pp 2003-2010, 2010. (C) [65] (RA).
[83]  "The Saturated Outlet Flow from Porous Media Evaporator, Boiling of Flow in Porous Media", Janiszewski A., Agnew B., Bailey P. B., Dadd M., Stone C. R., Davies G. F., Eames I. W., Maidment G. G. Submitted to International Journal of Heat and Fluid Flow, May 2010. (C) [55] (RA).
[84]   "Thermodynamic Simulation Modelling of Low-Temperature Geothermal Source Located in Arid-Zone Area North Africa." Masheiti S., Agnew B., JJMIE, V4, 1, 2010. (C) [55] (RA).
[85]  "The influence of Coolant Temperature on Various Cycle Parameters of Single Effect LiBr-H2O Absorption Chillers when Energised from a Low Temperature Heat Source". Masheiti S., Agnew B. I.Mech.E. Proceedings Part A, Journal of Power and Energy, 224, 7, 947-955, 2010. (C) [65] (RA).
[86]  "An Evaluation of the use of R134a and R245fa as the Working Fluid in an Organic Rankine Cycle Energized from a Low Temperature Geothermal Energy Source". S. Masheti S., Agnew B., Walker S., Journal of Energy and Power Engineering, V 5, 5, pp 392-402, 2011.
[87]  "Cooling Microprocessors using vapour Compression Refrigeration" Davies G. F., Eames I. W., Maidment G. G, Janiszewski A., Agnew B., Bailey P. B., Dadd M., Stone C. R., presented at ITherm 2010, (C) [15] (RCP).
[88]  "Analysis of a Combined Cycle Power Plant Integrated with a Liquid Natural Gas Gasification and Power Generation System" Shi X., Agnew B., Che D. I.Mech.E. Proceedings Part A, Journal of Power and Energy, Vol. 225, pp 1-11, 2011 (C) [60](RA).
[89]  "Performance and Exhaust Emissions of a Diesel Engine Fuelled with Croton Megalocarpus (Musine) Methyl Ester". Aliyu B., Shitanda D., Walker S., Agnew B., Masheiti S., Atan R., Applied Thermal Engineering, Vol. 31, pp 36-41, 2011. (C) [60] (RA).
[90]  "An Investigation of the Performance of Compact Heat Exchangers for Latent Heat Recovery from Exhaust Flue Gases". Shi X., Che D., Agnew B. Int. J. Heat and Mass Transfer, Vol. 54, pp 606-615, 2011. (C) [55] (RA).
[91]  "An Energy and Exergy Analysis of a Microturbine CHP System", Makhdoum M.M.A., Agnew B. Journal of Environmental Science and Engineering, V5 N0 4 pp 508-518, 2011.
[92]  "Process Energy Recovery-Getting the System Right", Tassou S., Karayiannis T., Agnew B., Harvey A., Reay D. UK Power and Process Engineering, in Press.
[93]  "Approximate Analysis of the Economic Advantage of a Dual Source ORC System Over Two Single ORC Systems in the Conversion of Dual Low and Mid Grade Heat Sources", Aneke M., Underwood C., Agnew B. Submitted to EUEC Journal March 2011.
[94]  "Performance Analysis of the Chene Binary Geothermal Power Plant" Aneke M., Agnew B., Underwood C., Applied Thermal Engineering, Vol. 31, pp 1825–1832, 2011.
[95]  "Prospects of Croton Megalocarpus (Musine) as a Source of Bio-Diesel" Aneke M., Agnew B., Aliyu B., Walker S., Rahim Atan., Submitted to the Nigerian Alternative Energy Expo. March 2011.
[96]  "Air Flow Measurements in the Underground Section of a UK Light Rail System" A. Pflitsch A., Bruene M., Steiling B., Killing-Heinze M., Agnew B., Irving M., Lockhart J., Applied Thermal Engineering, in Press.
[97]  "Power Generation Through the use of Waste Heat Energy from Process Industries: a Greener Approach to Reducing CO2 Emissions and Global Warming in Nigeria", Aneke M., Agnew B., Underwood C. FUTO Alternative Energy International Conference, 2011.
[98]  "A Note on the Design of Air spring Shells". Agnew B. Proc I.Mech.E., Vol. 205, 1991 pp207-209. (RA).
[99]  "A Comparison of Approximate Forms of Air Spring Shells". Agnew B. Proc I.Mech.E. Vol. 208, 1994, pp.207-210. (RA).
[100]  "An Analysis of the Acoustic Design and Ventilation of Motorcycle Crash Helmets". Agnew B. BMF Journal April 1996. (RA).
[101]  "A Survey of Pedestrian Accidents in Zentan City", Agnew B, Hamza M., Happian Smith J. Presented at the 10th International Public Health Conference, Brighton, April 2004. (C)(65)(RCP).
[102]  "A Review of Pedestrian Accidents and Injuries in Zentan City", Agnew B., Hamza M. Presented at the 10th Int. Cong. On Public Health. Brighton, May 2004. (C) [45] (RCP).
[103]  "Morbidity and Mortality in Road Traffic Accidents in Libya 1966-2000". Agnew B., Hamza M. and J. Happian Smith. Presented to the 14th Canadian Multidisciplinary Road Safety Conference, May 2004. (C) [45] (RCP).
[104]  "Injury Patterns, Accidents and Causalities in Libya", Agnew B, Hamza M, Happian Smith J. Presented at Kuwait Conference on Mechanical Engineering December 2004. (C) [55] (RCP).
[105]  A Survey of Pedestrian Accidents in Zentan City, Agnew B., Hamza M. and J. Happian Smith. Presented to the 14th Canadian Multidisciplinary Road Safety Conference, 2004. (C) [45] (RCP).
[106]  "Low Speed Rig will Research Compressor Operation". Agnew B., Elder R. L., McFarlane C. CME September 1984 pp.80-83 (P). (RA).
[107]  "An Investigation of the Response of Temperature Sensing Probes to an Unsteady Flow Field". Agnew B., Elder R. L., Terrell M. ASME 85-GT-223, 1985 ASME Gas Turbine Conference. pp. 263-262 (P) [90] (RCP).
[108]  "The Response of Temperature Sensing Probes to an Unsteady Flow Field". Agnew B., Elder R. L., Terrell M. Int. J. of Turbo and Jet Engines Number 11, V.3., 1986 pp.281-292 (P) [90] (RA).
[109]  "Tip Clearance Flows, Part 1 Experimental Investigation of an Isolated Rotor". Agnew B., Elder R. L. Schmidt M. VIII ISABE Conference, 1987 pp.1247-1268 (C) [50] (RCP).
[110]  "Tip Clearance Flows, Part 2 Study of Various Models and Comparison with Test Results". Agnew B., Elder R. L., Schmidt M. VIII ISABE Conference, 1987 pp.1269-1297 (C) [80] (RCP).
[111]  "An Experimental Study of the Effect of Blade Tip Clearance on Pressure Losses in an Axial Flow Compressor Rotor". Agnew B. Bendali-Amor M. 2nd Int. Conf. EAHE, Pilsen, June 1994 pp.111-116. (P) [95] (RCP).
[112]  "Limitations of Simple Lumped-Parameter Models for System Elasticity and Inertia in Turbo machinery Surge Analysis". Agnew B., Anderson A. 2nd Int. Conf. EAHE, Pilsen, June 1994 pp.105-110. (C) [50] (RCP).
[113]  "An Experimental Study of the Effect of Blade Tip Clearance on Pressure losses and Through-Flow Interactions in an Axial Flow Compressor". Agnew B., Bendali-Amor M. 2nd European Fluid Mechanics Conference, Warsaw Sept 1994. (P) [85] (RCP).
[114]  "A Secondary Flow and End-Wall Loss Model for the Prediction of Compressor Performance". Agnew B., Bendali-Amor M., Maougal A. 1994 Conference on Energetics, Bechou, Algeria November 1994. (C) [20] (RCP).
[115]  "An Experimental Investigation of the Effect of Tip Clearance on the Performance of an Isolated Single Rotor of an Axial Compressor". Agnew B., Bendali-Amor M. 1 eres Journees de Mecanique & Ingenierie, Mahdia, Tunisia May 1996. (C) [50] (RCP).