American Journal of Materials Science

American Journal of Materials Science publishes reviews, full-length papers, and short communications recording original research results on, or techniques for studying the relationship between structure, properties, and uses of materials.

Amin Bahrami

PhD Student, Centro de Investigación y de Estudios Avanzados del IPN Unidad Saltillo, Av. Industria Metalúrgica, Mexico

Research Areas

Composite materials, Hot deformation, Powder Metallurgy, Infiltration, Casting, Aluminum alloys

Education

2012-presentPhD Centro de Investigación y de Estudios Avanzados del IPN Unidad Saltillo, Saltillo, Coahuila, Mexico
2009-2011M.Sc.Imam Khomeini International University, Qazvin, Iran
2004-2008B.Sc. Sahand University of Technology, Tabriz, Iran

Publications: Journals

[1]  A Bahrami, A Razaghian, M Emamy, R Khorshidi: The effect of Zr on the microstructure and tensile properties of hot-extruded Al–Mg2Si composite. Materials and Design, 2012; 36:323-330.
[2]  A Razaghian, A Bahrami, M Emamy: The influence of Li on the tensile properties of extruded in-situ Al–15%Mg2Si composite. Materials Science and Engineering A, 2012; 532:346-353.
[3]  N Soltani, A Bahrami, MI Pech-Canul: The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite. Metallurgical and Materials Transactions A, 2013, 44(9): 4366-4373.
[4]  N Soltani, MI Pech-Canul, A Bahrami: Effect of 10Ce-TZP/Al2O3 nanocomposite particle amount and sintering temperature on the microstructure and mechanical properties of Al/(10Ce-TZP/Al2O3) nanocomposites. Materials and Design, 2013; 50:85-91.
[5]  N Soltani, HR Jafai, A Bahrami, MI Pech-Canul, Wencai Liu, Gouhua Wu: Effect of hot extrusion on wear properties of Al–15 wt.% Mg2Si in situ metal matrix composites. Materials and Design, 2014, 53:774-781.
[6]  H R Jafari, Wencai Liu, Guohua Wu, A Bahrami, MI Pech-Canul, M Emamy: Mechanical and Tribological Characterization of Al-Mg2Si Composites After Yttrium Addition and Heat Treatment. Journal of Materials Engineering and Performance, 2014, 23(4): 1146-1156.
[7]  A Bahrami, A Razaghian, M Emamy, HR Jafari, GS Mousavi: Microstructure and tensile properties of Al-15 wt.% Mg2Si composite after hot extrusion and heat treatment. Key Engineering Materials, 2011, 471:1171-1176.
[8]  HR Jafari, M Emamy, N Nemati, A Bahrami: The influence of Yttrium rich intermetallic phase and heat treatment on the microstructure, hardness and wear properties of Al-15% Mg2Si composite. Key Engineering Materials, 2011, 471: 1165-1170.
[9]  N Soltani, A Bahrami, FM Moghimi, MI Pech-canul, A Hajaghasi: The simultaneous effect of extrusion and T6 treatment on the mechanical properties of Al-15wt.% Mg2Si. HTM journal of heat treatment and material, 2012; 67(6): 378-385.
[10]  N Soltani, SK Sadrnezhaad, A Bahrami: Powder metallurgical production and characterization of Al matrix 10Ce-TZP/Al2O3 nanocomposite, Materials and manufacturing processes, 2014, Accepted.
[11]  A Bahrami, N Soltani, MI Pech-canul: Effect of sintering temperature on tribological behavior of Al- Ce-TZP/Al2O3 nanocomposite. Journal of materials engineering and performance, 2014, submitted.
[12]  A Bahrami, N Soltani, MI Pech-Canul, CA Gutierrez: Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives- A Review, Composite Part A, 2014, Submitted.
[13]  N Soltani, A Bahrami, MI Pech-Canul: A review on the physicochemical treatments of rice husk for production of advanced material. Chemical Engineering, 2014, Proposal Accepted.

Publications: Conferences/Workshops/Symposiums

[1]  N Solatani, A Bahrami, MI Pech-Canul: WEAR CHARACTERISTICS OF ALUMINUM MATRIX NANOCOMPOSITES WITH Ce-TZP/Al203 NANOCOMPOSITE PRODUCED BY POWDER METALLURGY AT DIFFERENT SINTERING TEMPERATURES. TMS 2013 (The Minerals, Metals & Materials Society), San Antonio, TX, USA.
[2]  N Soltani, A Bahrami, MI Pech‐Canul, A Razaghian, M Emamy: The Effect of Ti on Mechanical Properties of Extruded In‐Situ Al‐15% Mg2Si Composite. TMS 2013 (The Minerals, Metals & Materials Society), San Antonio, TX, USA.
[3]  A Bahrami, A Razaghian, M Emamy, HR Jafari, GS Mousavi,“Microstructure and tensile properties of Al-15wt% Mg2Si composite after hot extrusion and heat treatment”, ICCST8, 2011, Malaysia.
[4]  HR Jafari, M Emamy, N Nemati, A Bahrami, “The influence of Yttrium rich intermetallic phases and heat treatment on the microstructure, hardness and wear properties of Al-15%Mg2Si composite”, ICCST8, 2011, Malaysia.
[5]  A Bahrami, M Emamy. A Razaghian, “The Simultaneous Effects of Li and Hot Extrusion on the Tensile Properties of In-situ Al-15%Mg2Si Composite”, IMES, 2011, Iran.
[6]  A Bahrami, FM Moghimi, M Emamy, N Soltani, A Hajaghassi, MI Pech-Canul, “The effect of T6 treatment on the tensile properties of hot extruded Al–15wt. %Mg2Si metal matrix composite”, SAMPE, 2012, Baltimore (MD), USA.
[7]  FM Moghimi, M Emamy, A Hajaghassi, A Bahrami, A Sedghi, MI Pech-Canul, “The influence of Zn on the tensile properties of extruded in-situ Al-15%Mg2Si-0.3% Li composite”, SAMPE, 2012, Baltimore (MD), USA.
[8]  A Hajaghasi, M Emamy, A Bahrami, MI Pech-Canul, “The Effects of Extra Si and Heat Treatment on the Microstructure and Tensile Properties of Al-15%Mg2Si In-Situ Composite”, SAMPE, 2012, Baltimore (MD), USA.
[9]  N Soltani, ST Hashemi, SK Sadrnejad. A Bahrami, “The effect of Ce-TZP/Al2O3 nanocomposite particle amount on properties of Al- CeTZP/Al2O3 nanocomposite”, IIAC, 2012, Iran.