International Journal of Composite Materials

The International Journal of Composite Materials is a bimonthly peer-reviewed scientific journal. The journal covers all scientific and technological aspects of composite materials and their structures, including physical, chemical, artificial, mechanical, and other properties of Composite Materials as well as microscopic to macroscopic behavior studied both experimentally and theoretically.


Homayoun Hadavinia

Editor-in-Chief of International Journal of Composite Materials

Associate Professor, School of Mechanical and Automotive Engineering, Kingston University, UK

Research Areas

Wind Turbine, Composite Materials, Renewable Energy

Education

1995Ph.DImperial College London, UK.
1995DICImperial College London, UK.
1988M.ScSharif University of Technology
1985B.ScShiraz University, Shiraz

Experience

2007-presentAssociate lecturer, Open University, UK and Ireland
2005-presentFaculty of Engineering, Kingston University, UK
2001-2005Associate Research fellow, Mechanical Engineering Department, Imperial College London, UK
1998-2001Associate Research fellow, Mechanical Engineering Department, Imperial College London, UK
1996-1998Research fellow, Mechanical Engineering Department, Oxford Brookes University, UK

Academic Achievement

Platform Grant Award from UK Engineering & Physical Sciences Research Council (EPSRC), 2001
Research fellowship from UK Engineering Physical Science Research Council (EPSRC), 1998
Research fellowship from UK Engineering Physical Science Research Council (EPSRC), 1996
PhD scholarship from Ministry of Higher Education, 1992

Publications: Journals

[1]  Hadavinia H., Elmarakbi A. 2011. Special Issue on Structural Impact and Crashworthiness: Part I-Preface, Int. J. Vehicle Structures & Systems. Vol. 3, No 2.
[2]  Hadavinia H., Dogan F., Elmarakbi A. and Khalili S.M.R. 2011. Numerical Modelling of Low Velocity Impact on Laminated Composite Substructures, Int. J. Vehicle Structures & Systems. Vol. 3, No 2, pp 96-106, doi: 10.4273/ijvss.3.2.04.
[3]  Elmarakbi A., Fielding N. and Hadavinia H. 2011. Finite Element Simulation of Axial Crush of Thin-Walled Tubes with Different Cross-Sections: Vehicle Impact Applications', Int. J. Vehicle Structures & Systems. Vol. 3, No 3, pp.
[4]  Izzard V.G., Bradsell C.H., Hadavinia H., Morris V.J., Foot P.J.S., Wilson L.M., Hewson K. 2011, Performance of Nylon Based Polymer Foams at Elevated Temperature under Tensile Loading'. Key Engineering Materials, Accepted, in Press.
[5]  Ghasemnejad H., Vineet T., Hadavinia H. 2011, Mixed-mode delamination failure of z-pinned hybrid laminated composites, Key Engineering Materials, 452-453, pp. 453-456. ISSN 1662-9795.
[6]  Chau M., Hoffmann J., Blundell M.V., Ordys A., Hadavinia H., 2010. Effect of Side-wall Reinforcement on Energy Absorption of Thin-wall Cylindrical Damper, Key Engineering Materials, Vols. 417-418 (2010) pp 785-788.
[7]  Ghasemnejad H., Hadavinia H., Aboutorabi A., 2010. Effect of Delamination Failure in Crashworthiness Analysis of Hybrid Composite Box Structures, Materials and Design, 31(3), Elsevier, March, pp. 1105-1116.
[8]  Ghasemnejad H., Hadavinia H., 2010. Off-axis crashworthiness characteristic of woven glass/epoxy composite box structures, Journal of Reinforced Plastics and Composites, 29(15), August, pp. 2306-2330.
[9]  Aboutorabi A., Ghasemnejad H., Hadavinia H., 2010. Analytical Approach for Progressive Failure Crushing Modes of woven FRP composite box structures, World Journal of Engineering, Vol.7, No. 3, P154-162.
[10]  Rahmani O., Khalili S.M.R., Malekzadeh K., Hadavinia H., 2009. Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core', Composite Structures, Volume 91, Issue 2, pp 229-235.
[11]  Hadavinia H., Ghasemnejad H., 2009. Effects of Mode-I and Mode-II interlaminar fracture toughness on the energy absorption of CFRP twill/weave composite box sections, Composite Structures, 89(2) Elsevier, June, pp. 303-314., Elsevier.
[12]  Ghasemnejad H., Blackman B.R.K., Hadavinia H., Sudall B., 2009. Experimental studies on fracture characterisation and crashworthiness of GFRP composite box, Composite Structures, 88(2) pp. 253–261.
[13]  Ghasemnejad H., Hadavinia H., Marchant D.R., Aboutorabi A., 2008. Energy Absorption of Thin-walled Corrugated Crash Box in Axial Crushing, Journal of Structural Durability and Health Monitoring, Vol. 4(1) Tech Science Press, January, pp. 29-46.
[14]  Gordnian, K., Hadavinia, H., Mason, P.J., Madenci, E., 2008. Determination of fracture energy and cohesive strength in Mode I delamination of angle-ply laminated composites', Composite Structures, Vol. 82(4) February, pp. 577-586.
[15]  Ghasemnejad H., Hadavinia H., Lewis E., 2008. Crushing behaviour of CFRP composite structure, Key Engineering Materials, Vols.385-387, pp. 85-88.
[16]  Ghasemnejad H., Hadavinia H., Simpson G.B., 2007. Crashworthiness Optimization of Crash Box in Automotive Structure, Key Engineering Materials, 348-349, July, pp. 661-664.
[17]  Mashayekhi, M., Ziaei-Rad, S., Parvizian, J., Niklewicz, J., Hadavinia, H., 2007. Ductile Crack Growth Based on Damage Criterion: Experimental and Numerical Studies, Journal of Mechanics of Materials, ISBN 1930-2983 July 39 pp. 623–636.
[18]  Gordnian, K., Hadavinia, H., Karwatzki, J., 2006. Effect of Transverse Shear on Deformation of Thick Laminated Sandwich Plates, Key Engineering Materials, Vols. 324-325 pp 279-282.
[19]  Hadavinia, H., Gordnian, K., Karwatzki, J., Aboutorabi A., 2006. Deriving Shear Correction Factor for Thick Laminated Plates Using the Energy Equivalence Method, Journal of Structural Durability and Health Monitoring, 2(4) pp. 197-206, ISBN 1930-2983.
[20]  Hadavinia, H., Kawashita, L., Kinloch, A.J., Moore, D.R. and Williams, J.G., 2006. A numerical analysis of the elastic-plastic peel test, Engineering Fracture Mechanics.
[21]  Williams J.G., Hadavinia H, 2006. A Cohesive Zone Global Energy Analysis of an Impact Loaded Bi-Material Strip in Shear, International Journal of Fracture, Vol. 138(1-4) pp 197-209, ISSN: 0376-9429, .
[22]  Cotterell B., Hbaieb, K., Williams J.G., Hadavinia H., Tropsa V., 2006. The Root Rotation in Double Cantilever Beam and Peel Tests', Journal of Mechanics of Materials, Vol. 38 pp 571-584.
[23]  Williams, J.G., Hadavinia, H, Cotterell, B., 2005. Anisotropic elastic and elastic-plastic bending solutions for edge constrained beams, Int. J Solids and Structures, Vol. 42/18-19 pp 4927-4946.
[24]  Setoodeh, A., Hadavinia, H., Biglari, F. and Nikbin, K., 2005. Comparison of analytical, numerical and experimental methods in deriving fracture toughness properties of adhesives using bonded double lap joint specimens, Journal of Adhesion, Vol. 81(5), pp529-553.
[25]  Mashayekhi, M., Ziaei-Rad, S., Parvizian, J., Nikbin, K. and Hadavinia, H., 2005. Numerical analysis of damage evolution in ductile solids', Journal of Structural Integrity and Durability, Vol. 1, No. 1, pp. 67-82.
[26]  Mansouri, H., Monshi, A., and Hadavinia, H., 2004. 'Effect of local induction heat treatment on the residual stresses in the web region of a welded rail', Journal of Strain Analysis, Vol. 39, No 3:271-283.
[27]  Blackman, B.R.K., Hadavinia, H., Kinloch A.J., Paraschi M. and Williams J.G., 2003. The calculation of adhesive fracture energies in mode I: Revisiting the tapered double cantilever beam (TDCB) test', Engineering Fracture Mechanics, Vol. 70, pp233-248.
[28]  Georgiou, I., Hadavinia, H., Ivankovic, A., Kinloch, A.J., Tropsa, V. and Williams, J.G., 2003. Cohesive zone models and the plastically-deforming peel test, Journal of Adhesion, Vol. 79(3), pp239-265.
[29]  Blackman, B.R.K., Hadavinia, H., Kinloch, A.J. and Williams, J.G., 2003. 'The use of cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints, Int. Journal of Fracture, Vol. 119(1): 25–46.
[30]  Hadavinia, H., Kinloch, A.J., Little, M.S.G., and Taylor, A.C., 2003. 'The prediction of crack growth in bonded joints under cyclic fatigue loading. Part I: Experimental studies', International Journal of Adhesion and Adhesives, Vol. 23, No 6: 449-461.
[31]  Hadavinia, H., Kinloch, A.J., Little, M.S.G., and Taylor, A.C., 2003. The prediction of crack growth in bonded joints under cyclic fatigue loading. Part II: Analytical and finite element studies, International Journal of Adhesion and Adhesives, Vol. 23, No 6: 463-471.
[32]  Williams, J.G. and Hadavinia, H., 2002. Analytical Solutions for Cohesive Zone Models', J. Mech. Phys. Solids, No. 4, Vol. 50, pp 809-825.
[33]  Hadavinia, H., Travis, R.P. and Fenner, R.T., 2000. 'C1-Continuous Generalised Parabolic Blending Elements in the Boundary Element Method', Mathematical and Computer Modelling, No. 8-9, Vol. 31, pp 17-34.
[34]  Curley, A.J., Hadavinia, H., Kinloch, A.J., and Taylor, A.C., 2000. 'Predicting the service-life of adhesively-bonded joints', International Journal of Fracture, No. 1, Vol. 103, pp 33-61.
[35]  Hadavinia, H., Advani, S.G. and Fenner, R.T., 1995. The evolution of radial viscous fingering in Hele-Shaw cell using C1 continuous Overhauser boundary element method', Journal of Engineering Analysis with Boundary Elements, No.2, Vol. 16, pp 183-195.

Publications: Conferences/Workshops/Symposiums

[1]  Maleki A., Donchev T., Hadavinia H., Limbachiya M., Experimental and Numerical Modelling of GFRP-Steel Sandwich Shear Walls, 6th International Conference on Thin Walled Structures, 05-07 September 2011, Timisoara, Romania, Sep. 2011.
[2]  Izzard V.G., Bradsell C.H., Hadavinia H., Morris V.J., Foot P.J.S., Wilson L.M., Hewson K. 2011, Behaviour of Nylon Based Polymer Foams at High Temperature', 10th International Conference on Fracture and Damage Mechanics (FDM2011), Dubrovnik, Croatia, September 19-21, 2011.
[3]  A Maleki, T. Donchev, H. Hadavinia, A Cheah, Behaviour of steel shear wall systems with cut-outs and stiffeners, International Conference on Structures & Architecture ICSA2010, July, Portugal, 2010.
[4]  Ghasemnejad H., Vineet T., Hadavinia H., Mixed-mode delamination failure of z-pinned hybrid laminated composites, 9th International Conference on Fracture and Damage Mechanics, 20-22 September 2010, Nagasaki, Japan, 2010.
[5]  Izzard V.G., Bradsell C.H., Hadavinia H., Morris V.J., Foot P.J.S., Witten N., Investigation of the Compression Recovery Properties of Polyamide-6 Cellular Solid over the Temperature Range of-5°C to 90°C, (FDM09), 8-10 September, Malta, 2009.
[6]  Chau M., Hoffmann J., Blundell M.V., Ordys A., Hadavinia H., Effect of Side-wall Reinforcement on Energy Absorption of Thin-wall Cylindrical Damper, (FDM09), 8-10 September, Malta, 2009.
[7]  Ghasemnejad H., Hadavinia H., Ordys A., Coupling of interlaminar fracture toughness and crashworthiness in woven CFRP composite box structures, Composites 2009-2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, 1-3 April, Imperial College, London, UK, 2009.
[8]  Ahanchian N., Hadavinia H., Morris V.J. and Bradsell C.H., Effects of stacking sequence and cut-out size on buckling behaviour of composite plates', 15th International Conference on Composite Structures (ICCS15), Porto, Portugal, 15-17 June 2009.
[9]  Ghasemnejad H., Hadavinia H., Lewis E., Crushing behaviour of CFRP composite structure, The 7th international conference on fracture and damage mechanics (FDM08), 9-11 September, Seoul, Korea, 2008.
[10]  Hadavinia H., Design Aspect of Composite Blades for Wind Turbine: Delamination, International Workshop on Natural and Low Cost Materials in Wind Energy Technologies, 9-12 November, Dhulikhel, Nepal, 2008.
[11]  Ghasemnejad H., Blackman B.R.K., Hadavinia H., Crashworthiness of Composite Thin-walled GFRP and CFRP Box Structures, ESIS 2008, 5th International Conference on the Fracture of Polymers, Composites and Adhesives, September, les Diablerets, Switzerland, Sep. 2008.
[12]  Ghasemnejad H., Hadavinia H., Aboutorabi A., Study on energy absorption of GFRP composite crash box, Tenth International Conference on Structures Under Shock and Impact, 14-16 May, The Algarve, Portugal, 2008.
[13]  Ghasemnejad, H., Hadavinia H., Simpson, GB., "Crashworthiness Optimization of Crash Box in Automotive Structure", 6th International Conference on Fracture and Damage Mechanics (FDM07), July, Madeira, Portugal, 2007.
[14]  Gordnian K., Hadavinia H., Garcia JA., Aboutorabi A., "Determination of Mode II Fracture Toughness in Delamination of Angle-Ply Composite Beams", International Conference of Mechanical Engineering, ICME'07, 2-4 July, London, UK, 2007.
[15]  Petkova D., Donchev T., Wen J., Etebar K., Hadavinia H., "Behaviour of FRP strengthening of Structural Elements at Elevated Temperatures and Fire", INTERFLAM, , University of London, Royal Holloway College, UK, Sep. 2007.
[16]  Mashayekhi, M., Ziaei-Rad, S., Parvizian, J., Hadavinia, H., "Evaluation of Fracture in a Three Stage Forging Process Using Continuum Damage Mechanics", Numiform'07, The 9th International Conference in Numerical Methods in Industrial Forming Processes, 17-21 June, Porto, Portugal, 2007.
[17]  Gordnian, K., Hadavinia, H., Simpson, GB., Aboutorabi A, 'Calculation of Energy Release Rate in Mode I Delamination of Angle Ply Laminated Composites', The 14th ICCES Conference, ICCES07, January, Miami Beach, Florida, USA, 2007.
[18]  Kinloch A. J., Hadavinia H., Kawashita L., Moore D. R. and Williams J. G., Modelling of Elastic-Plastic Peel Tests for Structural Adhesives, the 16th European Conference of Fracture (ECF16), Alexandroupolis, Greece, July 3-7, 2006.
[19]  Gordnian, K., Hadavinia, H., Karwatzki, J., Effect of Transverse Shear on Deformation of Thick Laminated Sandwich Plates, 5th International Conference on Fracture and Damage Mechanics, China, September 2006.
[20]  Kinloch, A.J., Hadavinia, H., Kawashita, L., Moore, D.R., and Williams, J.G., A Novel Numerical Method for Analyzing Peel Tests, In: Anderson G, editor, Proceedings of the 29th Annual Meeting of the Adhesion Society, Florida, USA, Florida, Adhesion Society, Pages: 260-263, ISBN: 1086-9506, 19-22 February 2006.
[21]  Kinloch, A.J. and Hadavinia, H., The determination of the adhesive fracture energy, , from elastic-plastic peel tests via a novel numerical method. ESIS 4th TC4 Conference on Fracture of Polymers, Composites and Adhesives, Switzerland, 11-14 September 2005. c G.
[22]  Kinloch, A.J., Hadavinia, H., Kawashita, L., Moore, D.R., and Williams, J.G., A novel numerical model to analyse elastic-plastic peel tests, Adhesion 2005, 9th international conference on the science and technology of adhesion and adhesives, St. Catherine's College, University of Oxford, UK, Pages: 188-191, ISBN: 1-8612-5164-5, 7-9 September 2005.
[23]  Williams, J.G., Hadavinia, H, Kinloch, A.J., Cohesive zone models in the characterisation of toughness, 11th International Conference on Fracture, ICF11, Turin, Italy, March 2005.
[24]  Williams, J.G., Hadavinia, H, Global energy method as a basis of fracture analysis, Plenary lecture, 11th International Conference on Fracture, ICF11, Turin, Italy, March 2005.
[25]  Taylor, A.C., Hadavinia, H., Kinloch, A.J. and Lees, J.H., Nano and micro particles in adhesives: mechanical properties and modelling, 42nd Annual Conference on Adhesion and Adhesives, Oxford Brookes University, January 2005.
[26]  Mashayekhi, M., Ziaei-Rad, S., Parvizian, J., Hadavinia, H. and Nikbin, K., Influence of triaxial stress state on damage evolution in solids', The 13th International Conference of Mechanical Engineering, Isfahan, Iran, May 2005.
[27]  Wang X., Guild, F.J., Kinloch, A.J., Taylor, A.C. and Hadavinia, H., Modelling of Rubber Toughened Adhesives: The Effect of Particle Cavitation. In: Vorvolakos K, editor, Proceedings of the 28th annual meeting of the adhesion society, Alabama, USA, Adhesion Society, ISBN: 1086-9506 ( on CD-ROM ), 13-16 February 2005.
[28]  Wang X, Guild F.J., Kinloch A.J., Taylor A.C., Hadavinia H, Modelling the mechanical behaviour of rubber toughened epoxies, In: Vorvolakos K, editor, Proceedings of the 28th annual meeting of the adhesion society, Alabama, USA, Adhesion Society, ISBN: 1086-9506 ( on CD-ROM ), 13-16 February 2005.
[29]  Taylor, AC. , Hadavinia, H, Kinloch, A.J. and Lee, J.H., Epoxy nanocomposites: Measuring and modelling mechanical properties', 7th Structural Adhesives in Engineering Conference (SAE VII), Bristol, UK, London, IOM Communications Ltd, 13-15 July 2004.
[30]  Taylor, A.C., Hadavinia, H. and Kinloch A.J., The fracture and mechanical properties of epoxy micro-and nanocomposites, 12th international conference on deformation, yield and fracture of polymers, Cambridge, London, IOM Communications Ltd, Pages: 369-372, ISBN: 1-8612-5158-0, 2003.
[31]  Hadavinia, H., Busso E.P., Kinloch A.J., Taylor, A.C., Finite element modelling of particulate composites', Conference on Interfaces and Interphases in Multicomponent Materials, Balatonfured, Hungary, October 2003.
[32]  Hadavinia, H., Kinloch, A.J., Little, M.S.G., and Taylor, A.C., 'Prediction of fatigue crack growth in adhesive joints under environmental attack', In: Blom AF, editor, 8th international fatigue conference, Stockholm, EMAS, 2002, Pages: 1095-1102, ISBN: 1-9015-3730-7 June 2002.
[33]  Williams, J.G. and Hadavinia, H., Elastic and elastic-plastic correction factors for DCB specimens, 14th European Conference on Fracture-ECF 14 Fracture Mechanics Beyond 2000, Cracow, Poland, EMAS Publishing, Vol. 3, pp573-592, Sep. 2002.
[34]  Blackman, B.R.K., Hadavinia, H., Kinloch A.J. and Paraschi, M., Fracture mechanics test methods for adhesive joints, Euradh 2002, 8th international Conference on the Science and Technology of Adhesion and Adhesives, Glasgow, UK, Sep. 2002.
[35]  Kinloch, A.J., Blackman, B.R.K., Hadavinia, H., Paraschi, M. and Williams, J.G., Standardisation of Fracture Mechanics Tests for Engineering Adhesive Joints', In: Emerson JA, editor, Proceedings of the 24th annual meeting of the Adhesion Society: adhesion science for the 21st century, Williamsburg, Virginia, The Adhesion Society, 2001, Pages: 44-46, ISBN: 1086-9506, February 25 2001.
[36]  Kinloch AJ, Blackman BRK, Hadavinia H, Paraschi M, Williams JG, Toughness and durability of structural adhesive joints, In: Emerson JA, editor, Proceedings of the 24th annual meeting of the Adhesion Society: adhesion science for the 21st century, February 25, Williamsburg, Virginia, The Adhesion Society, Pages: 405-407, ISBN: 1086-9506 , 2001.
[37]  Hadavinia, H., Blackman, B.R.K., Kinloch, A.J. and Ziaei-Rad, S., 'Modal Analysis of TDCB bonded joint, SAE VI, 6th International Conference on Structural Adhesives in Engineering, Bristol, UK, p221-224, July 2001.
[38]  Kinloch, A.J., Curley, A.J., Hadavinia, H. and Taylor, A.C., 'Predicting the Fatigue-life of structural adhesive joints', 10th international conference on fracture (ICF 10), Honolulu, Hawaii, Elsevier, 2 December 2001.
[39]  Hadavinia, H., Kinloch, A.J., Little, M. and Taylor, A.C., 'The durability of Structural Adhesives: A Fracture Mechanics Approach', Institute of Material (IOM), 2000.
[40]  Kinloch, A.J., Hadavinia, H., Blackman, B.R.K., Ring-Groth, M., Williams, J.G. and Busso, E.P., 'The peel behaviour of adhesive joints', In: Anderson GL, editor, Proceedings of the 23rd annual meeting of the Adhesion Society 'Adhesion Science for the 21st century' Myrtle Beach, South Carolina 2000, The Adhesion Society, Pages: 25-28, ISBN: 1086-9506, February 20-23 2000.
[41]  Blackman, B.R.K., Hadavinia, H., Kinloch, A.J. and Paraschi, M., Fracture mechanics of adhesive joints', 2000 Gordon Research Conference on the Science of Adhesion, Tilton, USA, Aug. 6-11, 2000.
[42]  Harjoprayitno, W.W., Hadavinia, H. and Kinloch, A.J., 'Epoxy-moulded products: Studying and increasing the interfacial adhesion', 7th International Conference on Adhesion and Adhesive, Cambridge, UK, pp 341-346, Sep. 1999.
[43]  Hadavinia, H., Blackman, B.R.K., Kinloch, A.J., Ring-Groth, M. and Williams, J.G., ' The peel testing of adhesively-bonded joints', 7th International Conference on Adhesion and Adhesives (Cambridge UK) Gordon Breach Publishers/Elsevier Scientific Publications, Pages: 243-249, 15-17 September 1999.
[44]  Hadavinia H, Kinloch AJ, Little MSG, Taylor AC, The durability of structural adhesives: a fracture mechanics approach, One Day Symposium of the Institute of Materials: 9th December 1999 Adhesives Section (London), ISBN: 1861250665, 1999.
[45]  Blackman, B.R.K., Hadavinia, H., Kinloch, A.J. and Paraschi, M., 'Determining the adhesive fracture energy of bonded joints', 7th International Conference on Adhesion and Adhesive, Cambridge, UK, pp 425-430, Sep. 1999.
[46]  Hadavinia, H., Steidler, S., Durodola, J. and Beevers, A., Stiffness Sensitivity of Adhesive bonded coach joints in automotive structures', 5th International Conference of Structural Adhesives in Engineering (SAE V), Bristol, pp. 156-161, April 1998.
[47]  Steidler, S., Hadavinia, H., Durodola, J. and Beevers, A., 'Stiffness Characteristics of Adhesive Joints in Vehicle Body Structures: A comparison between FE models and experimental measurement', in Mechanical Behaviour of Adhesive Joints, Ed. R.D. Adams et al., EUROMECH Colloquium 358, ISAT Conference, Nevers, France, pp. 71-82, Sep. 1997.
[48]  Beevers, A, Steidler, S., Hadavinia, H., and Durodola, J., 'Modelling of Adhesive Joints for Automotive Body Structures', IOM Adhesive Section, Adhesive in Transport, Dec. 2nd 1997.

Publications: Books/Book Chapters

[1]  G Williams, H. Hadavinia, Chapter "A cohesive zone global energy analysis of an impact loaded bi-material strip in shear" in 'Advances in Fracture Research', Edited by Alberto Carpinteri, Yiu-Wing Mai, Robert O. Ritchie, Springer, pp. 197-209. ISBN/ISSN 978-1402046261, 2006.
[2]  A. J. Kinloch, H. Hadavinia, L. Kawashita, D. R. Moore, G Williams, Chapter "Modelling of Elastic-Plastic Peel Tests for Structural Adhesives" in 'Fracture of Nano and Engineering Materials and Structures', ISBN: 978-1-4020-4971-2 Edited by E. E. Gdoutus, Springer Netherlands, pp. 913, 2006.
[3]  Williams, J.G. and Hadavinia, H., Fracture Mechanics Beyond 2000-Keynote and Plenary Lectures, Editors: A Neimitz, I.V. Rokach, D Kocanda, K Golos, EMAS Publishing, ISBN 1901537390 2002.
[4]  Hadavinia, H., Kinloch, A.J. and Williams, J.G., In: Advances in fracture and damage mechanics, Editors: Guagliano M, Aliabadi MH, Hogger, Pages: 445-450, ISBN: 2-9401-3014-0, 2001.