International Journal of Materials and Chemistry

International Journal of Materials and Chemistry is a peer-reviewed international journal that publishes high impact work on the chemistry of novel materials. It covers the chemistry of materials in all forms, particularly materials associated with new technologies. Coverage is broad and includes the design and synthesis of materials, their characterization, processing, modeling, properties and applications.

Trilochan Mishra

Editorial Board Member of International Journal of Materials and Chemistry

Staff Scientist, Surface Engineering Group, ACC Division, CSIR-National Metallurgical Laboratory, India

Research Areas

Nanomaterials, Surface Chemistry, Catalysis, Coatings

Education

1997Ph.DChemistry, Utkal University

Academic Achievement

Best paper presentation award by Orissa Chemical Society in 1996
Biography published in Marquis Who's Who of Science and Technology (2008-2009)
Young Chemist award-2007 by Orissa Chemical Society
Best paper presentation award at Catalysis workshop-2008, India
Invited Member of Reader Panel of Nature journal. 2008-09
Young scientist project award, DST, India, 2003

Membership

Member of Bureau of Indian Standards (BIS) for Inorganic Chemical Section Committee (CHD-1)

Publications: Conferences/Workshops/Symposiums/Journals/Books

[1]  Transition metal promoted amorphous AIPO4 catalysts. 1. Acid-base and textural properties. K. M. Parida and T. Mishra. J. Colloid and Interface Science, 179 233(1996).
[2]  Transition metal oxide pillared clay: 1. A comparative study of textural and acidic properties of Fe(III) pillared montmorillonite and pillared acid activated montmorillonite. T. Mishra, K. M. Parida and S. B. Rao, J. Colloid and Interface Science 183, 176(1996).
[3]  Transition metal oxide pillared clay: 2. Comparative study of textural and acidic properties of Mn(III) pillared montmorillonite and pillared acid activated montmorillonite. T. Mishra, K. M. Parida and S. B. Rao, J. Mater. Chem., 7, 147(1997).
[4]  Transition metal oxide pillared clay: 3. A shape selective catalyst for nitration of chlorobenzene. T. Mishra, K. M. Parida, J. Mol. Catal. 121, 91(1997).
[5]  Transition metal promoted amorphous AIPO4 catalysts. The catalytic activity of M0.05Al0.95PO4 for alcohol conversion and cumene cracking/dehydrogenation reactions. T. Mishra, K. M. Parida and S. B. Rao, Appl. Catal., A, 166, 115(1998).
[6]  Transition metal oxide pillared clay: 4. A comparative study of textural and acidic properties of Cr(III) pillared montmorillonite and pillared acid activated montmorillonite. T. Mishra, K. M. Parida, Appl. Catal. A, 166, 123(1998).
[7]  Catalytic activity of transition metal mixed aluminium phosphate towards alcohol conversion reactions. T. Mishra, K. M. Parida and S. B. Rao, Studies in Surface Sci. Catal., 113, 963(1998).
[8]  Ion-exchange and sorption properties of aluminium phosphate. T. Mishra, K. M. Parida and S. B. Rao, J. Sep. Sci. Technol., 33(7), 1057(1998).
[9]  Transition metal oxide pillared clay: 5. Synthesis, characterisation and catalytic activity of iron-chromium mixed oxide pillared montmorillonite. T. Mishra, K. M. Parida, Appl. Catal., A, 174, 91(1998).
[10]  Studies on anion promoted titania. 1: Preparation, characterisation and catalytic activity towards alcohol and cumene conversion reactions of phosphated titania. K. M. Parida, M. Acharya, S. K. Samantaray and T. Mishra., J. Colloid and Interface Sci., 217, 388(1999).
[11]  Thermal transformation of trinuclear iron(III) acetato complex intercalated montmorillonite. K. M. Parida, T. Mishra, D. Das and S. N. Chintalpuri, Appl. Clay Sci., 15, 463(1999).
[12]  Studies on anion promoted titania. 1: Preparation, characterization and catalytic activity towards aromatic alkylation over sulphated titania. S. K. Samantaray, T. Mishra and K. M. Parida, J. Mol. Catal., 156, 267(2000).
[13]  Tungstate modified aluminium phosphate: 1. Preparation, characterization and catalytic activity towards alcohol and cumene conversion reactions. K. M. Parida, M. Acharya and T. Mishra, J. Mol. Catal., 164, 217(2000).
[14]  Synthesis and sorption properties of 13x zeolite derived from coal fly ash. T. Mishra, S. K. Tiwari, N. N. Das and B. Mahato; J. Metallurgy and Material Sci., 45(2003) 193.
[15]  Effect of sulphate on the textural and catalytic properties of iron-chromium mixed oxide pillared clay. T. Mishra, K. M. Parida; J. Colloid & Interface Sci. 301 (2006)554.
[16]  Studies on sorption properties of zeolite derived from fly ash. T. Mishra, S. K. Tiwari, J. Hazrd. Mater. B, 137(2006) 299.
[17]  Effect of microemulsion composition on textural and photocatalytic activity of titania nanomaterial. P. Mohapatra, T. Mishra and K. M. Parida; J. Appl. Catal, A 310 (2006) 183.
[18]  Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications. S. K. Tiwari, T. Mishra, M. K. Gunjan, A. Bhattacharya, T. B. Singh, R. Singh.; J. Surf. Coat. Technol. 201(2007) 7582-88.
[19]  Effect of UV and visible light on photocatalytic reduction of lead and cadmium over titania based binary oxide materials. T. Mishra, J. Hait, Noor Aman, R. K. Jana and S. Chakraborty; J. Colloid. Interface Sci., 316 (2007)80-84.
[20]  Anion supported TiO2-ZrO2 nanomaterials as catalyst for solvent free nitration of halobenzene. T. Mishra; Catal. Comm. 9 (2008) 21. IF:3.00
[21]  Synthesis, characterisation and catalytic evaluation of iron-manganese mixed oxide pillared clay towards VOC oxidation reaction. T. Mishra, P. Mahapatra and K. M. Parida, Appl. Catal, B 79 (2008) 279-285. IF:4.85
[22]  Polymer assisted hydroxyapatite microspheres suitable for biomedical application. A. Sinha, T. Mishra and N. Ravishankar; Mater. Sci: Mater. Med., 19 (2008) 2009.IF: 1.85
[23]  Single step synthesis of Ni wire, sponge and flower, and their magnetic properties. R. K. Sahu, A. K. Ray, S. Sundar Manoharan, S. Arora, T. Mishra, S-H. Lim, L.G. Salamanca-Riba, D. C. Kundaliya and L. C. Pathak; Procd. Magnetic Materials, Am. Inst. Phys. 2008, p100-102.
[24]  Microwave assisted synthesis of nickel wire from metal-organic precursor containing Ni(II) and triethanolamine. R. K. Sahu, A. K.Ray, T. Mishra, L. C. Pathak; Crystal Growth & Dign. 8 (2008) 3754-60. IF: 4.2
[25]  Surfactant mediated synthesis of spherical binary oxides photocatalysts with enhanced activity in visible light. T. Mishra, J. Hatti, Noor Aman, R. K. Jana, M. Gunjan, B. Mahato; J. Colloid & Interface Sci. 327 (2008)377-83. IF: 3.00
[26]  Mimicking biomineralization under microgravity. A. Sinha, A. K. Gupta, A. K. Paramanic, S. Nayar, M. K. Gunjan, T. Mishra, N. C. Bhatt, N. Vishwanath, S. Das, Mater. Sci. Engg. C 29(2009)779-784. IF: 1.56
[27]  Influence of foreign Fe ion on wet chemical synthesis of Pt nanoparticle thin films at ambient temperature: In situ versus direct addition R. K. Sahu, D. Mukherjee, J. P. Tiwari, T. Mishra, S. K. Roy, L. C. Pathak, J. Mater. Chem 19 (2009) 6810. IF: 4.8
[28]  Composition dependent structural modulations in transparent poly (vinyl alcohol) hydrogels. S. Gupta, A. K. Pramanick, A. Kailath, T.Mishra, A. Guha, S. Nayar, A. Sinha; Colloid and Surf. B : Biointerfaces 74 (2009) 186–190
[29]  Hexadecylamine capped hydrophobic silver and gold nanoparticles: Comparative study on formation and self organization. T. Mishra, R. K. Sahu, S. H. Lim, L. G. Salamanca-Riba, S. Bhattacharjee; Mater. Chem. Phys. 123 (2010) 540–545. IF: 2.05
[30]  Facile synthesis of thermally stable, mesoporous N doped titanium zirconium oxide nanomaterial with enhanced photocatalytic activity under visible light. Noor Aman, T. Mishra, R. K. Sahu, J. P. Tiwari; J. Mater. Chem.20 (2010) 10876-82. IF: 4.8
[31]  Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Noor Aman. T. Mishra, J. Hait, R. K. Jana; J. Hazrd Mater Mater186 (2011) 360–366 IF: 4.15
[32]  Mesoporous WN co-doped titania nanomaterial with enhanced photocatalytic aqueous nitrate removal activity under visible light. T. Mishra, M. Mahato, Noor Aman, J. N. Patel, R. K. Sahu; Catal Sci. Technol. 1011, 1, 609–615.
[33]  Preparation of high surface area zirconia by homogeneous precipitation method. K. M. Parida, T. Mishra, J. Das and P. K. Pattanik; Proceeding of 12th national symposium on Catalysis, (1994)315.
[34]  Effect of transition metal substitution on acid base and textural properties of aluminium phosphate. K. M. Parida, T. Mishra, S. B. Rao; Proceeding of 12th national symposium on Catalysis, (1994)322.
[35]  Preparation, characterisation and catalytic activity of tungstate modified aluminium phosphate. T. Mishra, M. Acharya and K. M. Parida; Proceeding of 15th National Symposium on Catalysis, 2001.
[36]  Vapour phase aromatic alkylation by 2-propoanol over sulphated titania. T. Mishra, S. K. Samantaray, K. M. Parida, Proceeding of 15th National Symposium on Catalysis, 2001.
[37]  Aromatic benzoylation over sulphated iron-chromium mixed oxide pillared clay. T. Mishra; Proceeding of 17th national symposium on Catalysis, (2005).
[38]  UV/Visible light induced photocatalytic detoxification of metal ions. T. Mishra, J. Hait, R. K. Jana and S. Chakravarty Proceeding of 10th International conference on non-ferrous metals-2006.
[39]  Photocatalytic detoxification of waste water stream. T. Mishra, J. Hait, R. K. Jana and S. Chakravarty Transaction of Indian Institute of Metals 58 (2005)5.
[40]  Photocatalytic removal of copper and selenium from wastewater under visible light, T. Mishra, J. Hait, Noor aman, R. K. Jana Proceeding of 11th International conference on non-ferrous metals-2008.
[41]  Study on arsenic removal capacity of iron oxide pillared montmorillonite clay from ground water. T. Mishra, S. Pal, J. N. Patel, S. Bhattacharjee Proceeding of 11th International seminar on Mineral processing Technology, 2010, Vol-II, Page-123
[42]  Selinium friend or foe. S. B. Rao, T. Mishra and K. M. Parida; Science Reporter, Feb. 1995, P. 51.
[43]  Transition metal oxide pillared clay catalyst: Synthesis to application. T. Mishra, Pillared clays and related catalysts, A. Gill et al (Eds), Springer, New York, 2010, pp99-128