International Journal of Materials Engineering

The International Journal of Materials Engineering strives to publish articles related to fundamental properties of engineering materials, mechanical characterisation, how they are controlled by processing, formed, joined and finished, and how all of these factors influence the selection and design of materials in real-world engineering applications.

Velagapudi Vasu

Editorial Board Member of International Journal of Materials Engineering

Assistant Professor, Department of mechanical Engg., National Institute of Technology, Warangal, India

Research Areas

Nanomaterials, Nanofluids, Nanocomposites, MEMS

Education

2010Ph.DAPTECH Computer Education, J N T U , Hyderabad
2003M.EBoard of Secondary Education, BITS, PILANI
1999B.TechBoard of intermediate, NAGARJUNA UNIVERSITY/V R SIDDHARTHA ENGG COLLEGE

Experience

2008-presentLecturer, Research, Scholar, Nimra college of Engg. & Tech.Vijayawada
2003-2008Lecturer, Research, Scholar, V R Siddhartha Engg college, Vijayawada.
1999-2001Asst. Professor, NIT, Warangal

Academic Achievement

Young Engineer Award 2010, from Govt. AP and Institute of Engineers
Honor to Present Paper in Young Scientist Forum at Annual World Congress Nano S&T, China
DST International Travel Grant under Young Scientist scheum

Membership

Institute of Engineers Life Member (M 1421861)
Indian Society for Techanical Education Life member (LH 43012)
Indian Society for Heat and Mass Transfer Life member (ISHMT 483)
BITS Pilani Alumnus Life Member (L 8269)

Publications: Journals

[1]  V Vasu, K Monaj Kumar, Anakysis of nanofluids as cutting fluid in Grinding EN-31 steel, Nano-Micro Letters, Vol.3, no.2, 2011.
[2]  V Vasu, Predeep Kumar reddy, Effect of Minimum Quantity Lubrication [MQL] with Al2O3 Nanoparticle on Surface Roughness, Tool Wear, Temperature Dissipation in Machining Inconel 600 Alloy, Proceeding of Institiute of Engineers Nanoengineering and Nanosystems (Accepted)
[3]  V Vasu, K Rama Krishna, ACS Kumar" Heat transfer with nanofluids for electronic cooling", International Journal of materials and Product Technology, vol. 34, no.1-2, pp. 158-171, 2009. (Publisher : Inderscience Publications UK, Impact Factor 0.58)
[4]  V Vasu, K Rama Krishna, ACS Kumar, "Analytical Prediction Of Thermophysical Properties Of Fluids Embedded With Nanostructured Materials", International Journal of Nanoparticles, vol.1, no.1, pp.32-49, 2008 . (Publisher : Inderscience Publications UK, Impact factor : 1.22)
[5]  V Vasu, K Rama Krishna, ACS Kumar, "Thermal design analysis of compact heat exchanger using nanofluids" International Journal of Nanomanufacturing, vol.2, no.3, pp. 271-288, 2008. (Publisher : Inderscience Publications UK, Impact factor : 1.773)
[6]  V Vasu, K Rama Krishnam ACS Kumar, Empirical Correlations to predict thermophysical and heat transfer characteristics of Nanofluids, Thermal Science Journal, vol.12, no.2, 27-37, 2008. (Publisher : Scopus, USA, Impact factor : 0.61)
[7]  V Vasu, K Rama Krishna, Acs Kumar, Application of nanofluids for thermal design of compact heat exchanger, International Journal of nanotechnology applications, vol.2, no.1, pp. 75-87, 2008. (No impact factor)
[8]  V vasu, Krishna Prasad, S. Rajesh, "Analytical Prediction of Stability lobes in High-speed milling and their Application to Micro-Milling", International Journal of Manufacturing Management & Technology, vol.13, no. 2/3/4, pp. 146-168, 2008. (Publisher : Inderscience Publications UK, Impact factor : 0.986)
[9]  V Vasu, K Rama Krishna, ACS Kumar, "Exploitation of Thermal Properties of Fluids Embedded with Nanostructured materials", International Energy Journal, Vol.8, no.3, 178-186, sep, 2007(Publisher: AIT, Thailand, Impact factor : 0.023)
[10]  V Vasu, K Rama Krishna, ACS Kumar, "Analytical prediction of forced convective heat transfer of fluids embedded with nanostructured materials (nanofluids)" Pramana-Journal of Physics, Vol.69, no.3, 411-421, sep, 2007. (Publisher : Springer, Impact factor 0.568)
[11]  V Vasu, R B Kodali, "An evaluation of strategic criteria for the selection of facilities location in design of Supply chain", International journal of Management Digest : Focus, vol.1, no.1, pp.30-40, April, 2005. (Publisher : IFIM, Bangalore)
[12]  V vasu, Krishna Prasad, S. Rajesh, " Analytical Prediction of stability lodes for Micro milling", Journal of Manufacturing Technology Today (MTT), Vol. 5, no.10, pp. 17-23, Oct, 2006. (Publisher : CMTI, Bangalore)
[13]  V Vasu, D Karthik, K Anoop Kumar, Numerical Analysis of Automobile Radiator using Nanofluids as Coolants, Cooling India, Vol.6, no.2, pp. 98-108, 2010.
[14]  V Vasu, P U Praful, Nanofluids as cutting fluids in Minimum Quantity Lubrication Turning operation, Journal of Nanoscience and Nanotechnology, vol.4, no.2, pp. 30-38, 2010.
[15]  V Vasu, T Abhinav, Thermo Elastic Damping in MEMS Resonators-An Overview, Journal of Mechanical Engineering, vol. 1, no.2, 2011.

Publications: Conferences/Workshops/Symposiums

[1]  V Vasu, Sashikath, "Analysis of nanofluids as coolant in grinding process using FEM" AIMTDR 2010
[2]  v vasu, N Vijaya Sai, Design and fabrication of MEMS, International conference of Human Machine Interference, in IISCBangalore, (ICHM-2004), Dec, 22-24, 2004.
[3]  V Vasu, K Rama Krishna, ACS Kumar, Applicability of Dittus-Boelter correlation for convective Transport in Nanofluids, 8th International Conference on Nanostructured Materials, in IISC Bangalore, (NANO-2006) Aug, 20-25, 2006.
[4]  V vasu, K Rama Krishna, ACS Kumar, Theortical Evaluation of Thermophysical properties of Nanofluids, 7th ASME-ISHMT Heat and Mass Conference, in IIT Guwahati, (ASME-ISHMT 06), Jan, 4-6, 2006.
[5]  vasu, Nanaji, Multi Attributes for Selection of Manufacturing Site in Supply Chain management by using ELECTRE Method, The 21st All India Manufacturing Technology Design and Research conference. In Vellore Institute of Technlogy.(AIMTDR-2004), 20-22, Dec, 2004.
[6]  Vvasu & N nanaji, Multi attributes for selection of ware house location in supply chain management using ELETRE method, UGC National conference on Advances Automation of manufacturing systems in Jai Narain Vyas university, Jodhpur (NCAIA-2004), Mar, 20-21, 2004.
[7]  Vvasu & N Nanaji, Selection of Manufacturing System using Analytical Hierarchy Process(AHP), All India Conference on Advances in Mechanical Engineering in Sri Venkateteswara UniversityTirupati (AISCONAME-2004), Aug 20-21, 2004.
[8]  V vasu, N Vijaya sai, MSR Naranjan, Simulation of Manufacturing System Layout using Computer based Algorithm, National Coference on State of Art of Technologies in Mechanical Engineering in JNTU Hyderabad, (NCSAME 2004), Jun 29-30, 2004.
[9]  V Vasu, N Vijaya Kumar, A case study of Mechatronics system-Floppy Drive, National conference in Recent Trends in Mechanical Engineering in College of Engg. Kopargaon under University of Pune(R-TIME 2004), Jul 23-24, 2004.
[10]  V Vasu, MSR Niranjan, Md. Abid, Expert system approach for material Handling equipment in FMS, National conference on Emerging Trends in Concurrent Engineering, NIT Rourkela (ETCE-2005), Jan 15-16, 2005.