International Journal of Energy Engineering

International journal of Energy Engineering is an open access, peer-reviewed scientific journal that publishes original articles, critical reviews, research notes, debate and short reports in all areas of energy engineering.

Umberto Desideri

Editorial Board Member of International Journal of Energy Engineering

Professor, University of Perugia, Italy

Research Areas

Advanced Power Plants, Power Plants Performance, Renewable Energy Systems, Fuel Cells, Carbon Capture and Storage

Education

1993PhDEnergy Engineering

Experience

2004-presentFull Professor, University of Perugia, Italy
2000-2004 Associate Professor, University of Perugia, Italy
1992-2000Assistant Professor, University of Perugia, Italy

Academic Achievement

April 2007, pp. 338-351 [DOI: 10.1115/1.2434346] ISSN: 0742-4795", has received the Best Paper Award of the Coal Biomass and Alternative Fuels committee of the International Gas Turbine Institute
In 2009 the paper "Colantoni S., Della Gatta S., De Prosperis R., Russo A., Fantozzi F., Desideri U., 2009, Gas turbines fired with biomass pyrolysis syngas: analysis of the overheating of hot gas path components", ASME Paper GT2009-60233, Proceedings of

Membership

Chair of the Organizing Committee of the International Conference ICAE2011, which was held in Perugia from May 16th to 18th 2011
Chair of the Coal Biomass and Alternative Fuels Commitee of the International Gas Turbine Institute from 2006 to 2008
Since 1994, Member of the American Society of Mechanical Engineers
Since 2010 is Member of the Committee of the American Society of Mechanical Engineers which is Developing the Perfomance Test Code 48 "Overall Plant Performance with Carbon Capture"
Since 2005 Founder of the Spin-off Company: Tecnologie Per La Riduzione Delle Emissioni Engineering Srl
Since 2005 Founder of the Spin-off Company: Biomasse Enuove Tecnologie Srl
Director of the International Master "Techologies for Greenhouse Gases Mitigation" from 2003 to 2005
Member of the Administration Board of the University of Perugia since 1 January 2011
Since 2008 Represents the University of Perugia in the Taskforce Technology of the European Union Zero Emission Platform
Since 2008 Director of the Consortium Macchine Impianti e Sistemi Energetici

Publications: Conferences/Workshops/Symposiums/Journals/Books

[1]  Stecco S.S. e Desideri U., 1989, "Thermodynamic Analysis of the Kalina Cycles: Comparisons, Problems, Perspectives", ASME Paper 89-GT-149, presentato al 34th ASME International Gas Turbine and Aeroengine Congress and Exposition, 4-8 giugno, Toronto, Canada, stampato dall'American Society of Mechanical Engineers a New York, USA.
[2]  Stecco S.S. e Desideri U., 1989, "Optimization of the Heat Recovery Section in Combined Power Plants", Proceedings of the 24th Intersociety Energy Conversion Engineering Conference, pp. 2535-2542, 4-6 agosto, Washington, DC, USA, stampato dall'Institute of Electrical and Electronics Engineers a New York, USA.
[3]  Olsson E., Desideri U., Stecco S.S. e Svedberg G., 1991, "An Integrated Gas Turbine Kalina Cycle for Cogeneration", ASME Paper 91-GT-202, presentato al 36th ASME International Gas Turbine and Aeroengine Congress and Exposition, 4-6 giugno, Orlando, FL, USA, stampato dall'American Society of Mechanical Engineers a New York, USA.
[4]  Desideri U., Olsson E., Stecco S.S. e Svedberg G., 1991, "The Ammonia-Water Mixture Rankine Cycle: Considerations on its Applicability as Bottoming Cycle", Proceedings of the 26th Intersociety Energy Conversion Engineering Conference, Vol. 2, pp.449-454, 3-9 agosto, Boston, MA, USA, stampato dall'American Nuclear Society a La Grange Park, IL, USA.
[5]  Bosio A., Cioli R., Desideri U. e Marchi L., 1991, "Alternative Uses of Olive Husks: A Technical-Economic Evaluation", in Biomass for Energy Industry and Environment, pp. 1116-1120, Ed. Grassi G., Collina A., Zibetta H., stampato nel 1992 da Elsevier Applied Science a Londra, U.K., ISBN 185166730X, Proceedings of the International Conference on Biomass for Energy, Industry and Environment, 22-26 aprile, Atene, Grecia.
[6]  Cioli R. e Desideri U., 1991, "STEMCOD: un Codice di Calcolo Modulare per Cicli a Vapore", Atti del 5º Convegno Nazionale Gruppi Combinati-Prospettive Tecniche ed Economiche, pp. 219-230, 14 giugno, Bologna, stampato da Pitagora Editrice, Bologna.
[7]  Bidini G., Desideri U. e Facchini B., 1991, "Thermoeconomic Analysis of a Combined Gas Steam Unit", Proceedings of the 1st International Conference on Combustion Technologies for a Clean Environment, pp. 16-22/25.3, 3-6 settembre, Vilamoura, Algarve, Portogallo.
[8]  Bidini G., Desideri U. e Facchini B., 1991, "Analisi Termoeconomica di Impianti Combinati al Variare dei Parametri Economici", Atti del 46º Congresso Nazionale dell'Associazione Termotecnica Italiana, pp. IIC-55-64, 25-27 settembre, Cassino-Gaeta, stampato da SGE, Padova.
[9]  Desideri U., Facchini B. e Stecco S.S., 1991, "A New Concept for the Reduction of Pollutant Emissions in Industrial Gas Turbine Plants", in Combustion Technologies for a Clean Environment, pp. 407-419, Ed. M.G. Carvalho, F.C. Lockwood, W.A. Fiveland and C. Papadopoulos, Gordon & Breach Publishers, stampato nel 1995 a New York, USA, ISBN 2-8812-4619-2, articolo selezionato dai Proceedings of the 1st International Conference on Combustion Technologies for a Clean Environment, pp. 1-8/28.2, 3-6 settembre, Vilamoura, Algarve, Portogallo.
[10]  Stecco S.S. e Desideri U., 1992, "Considerations on the Design Principles for a Binary Mixture Heat Recovery Boiler", Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, Vol. 114, ottobre, pp. 701-706, stampato dall'American Society of Mechanical Engineers a New York, USA, ISSN 0742-4795, doi:10.1115/1.2906645
[11]  Bosio A. e Desideri U., 1992, "The Use of Saltwater in Varying the Energy Produced in a Combined Gas-Steam Plant", Proceedings of the International Symposium ECOS '92, pp. 407-412, 15-18 giugno, Zaragoza, Spagna, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-0631-6.
[12]  Cattieuw P., Desideri U., Tadrist L. e Pantaloni J., 1992, "Experimental Study of a Circulating Fluidized Bed", in Energy for the Transition Age, pp.461-471, Ed. S.S. Stecco e M.J. Moran, Nova Science Publishers, stampato a Commack, NY, USA, ISBN 1-5607-2083-4
[13]  Desideri U. e Facchini B., 1992, "A New Gas-Steam-Ammonia Combined Cycle to Reduce Cooling Water Consumption", Proceedings of the 1992 ASME Cogen Turbo Power, pp. 193-200, 1-3 settembre, Houston, TX, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-0670-7.
[14]  Desideri U. e Andreini G., 1992, "Prime Prove Sperimentali per la Verifica dell'Applicabilità delle Celle Peltier per la Produzione dell'Energia Elettrica", presentato alla Giornata Nazionale di Studio MIS-MAC: Metodi di Sperimentazione nelle Macchine e negli Impianti Industriali, 23 ottobre, Perugia, pubblicazione registrata presso la procura di Perugia in data 3 giugno 1996.
[15]  Bosio A. e Desideri U., 1992, "Il Ciclo Idro-Combinato: Confronti e Prospettive di Sviluppo", Atti del VI Convegno Nazionale Gruppi Combinati: Prospettive Tecniche ed Economiche, pp. 707-717, 12-13 novembre, Genova, stampato da SGE, Padova.
[16]  Stecco S.S., Desideri U., Facchini B., Bellagamba B., Donatini F., Neri G. e Sonato G., 1992, "Effetti della Refrigerazione a Secco con Ammoniaca in Unità Termoelettriche a Ciclo Combinato", Atti del VI Convegno Nazionale Gruppi Combinati: Prospettive Tecniche ed Economiche, pp. 501-510, 12-13 novembre, Genova, stampato da SGE, Padova.
[17]  Stecco S.S., Desideri U., Facchini B. e Bettagli N., 1993, "The Humid Air Cycle: Some Thermodynamic Considerations", ASME Paper 93-GT-77, presentato al 38th ASME International Gas Turbine and Aeroengine Congress and Exposition, 24-27 maggio, Cincinnati, OH, USA, stampato dall'American Society of Mechanical Engineers a New York, USA.
[18]  Stecco S.S., Desideri U. e Bettagli N., 1993, "Humid Air Gas Turbine Cycle: a Possible Optimization", ASME Paper 93-GT-178, presentato al 38th ASME International Gas Turbine and Aeroengine Congress and Exposition, 24-27 maggio, Cincinnati, OH, USA, stampato dall'American Society of Mechanical Engineers a New York, USA.
[19]  Desideri U. e Bidini G., 1993, "Minimizing Entropy Generation To Optimize the Heat Transfer Surface of a Heat Recovery Boiler in a Combined Cycle Power Plant", Proceedings of the 1993 ASME Cogen Turbo, pp. 427-434, 21-23 settembre, Bournemouth, U.K., stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-0685-5.
[20]  Desideri U. e Fibbi A., 1993, "A Simplified Approach to Off-design Performance Evaluation of Combined Cycle Powerplants with Single Pressure Steam Cycles", Proceedings of the 1993 ASME Cogen Turbo, pp. 199-208, 21-23 settembre, Bournemouth, U.K., stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-0685-5.
[21]  Desideri U. e Facchini B., 1993, "Analisi dei sistemi di Regolazione nei Cicli Combinati Gas-Vapore per la Produzione di Energia Elettrica", Atti del VII Convegno Nazionale "Gruppi Combinati-Prospettive Tecniche ed Economiche", pp. 199-209, 21-22 Ottobre, Milano, stampato da SGE, Padova.
[22]  Andreini G., Billi A, Desideri U. e Rossi S., 1994, "Thermal to Electric Energy Converters: Present Field of Application", in Energy for the 21st Century: Conversion Utilization and Environmental Quality, pp. 889-896, Ed. E. Carnevale, G. Manfrida e F. Martelli, stampato da SGE, Padova.
[23]  Grimaldi C.N. e Desideri U., 1994, "Performance Analysis of Combined Cycles: Steam Recompression vs. Conventional Bottoming Cycles", ASME Paper 94-GT-437, presentato al 39th ASME International Gas Turbine and Aeroengine Congress and Exposition, 13-16 giugno, L'Aia, Olanda, stampato dall'American Society of Mechanical Engineers a New York, USA.
[24]  Desideri U., 1994, "Performance Analysis of Gas Turbines Operating at Different Atmospheric Conditions", Proceedings of the 1994 ASME Cogen Turbo (IGTI Vol. 9), pp. 485-492, 23-26 ottobre, Portland, OR, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-1213-6.
[25]  Desideri U. e Manfrida G., 1994, "Caratterizzazione del Flusso in un Modello di Diffusore di Scarico di Turbina a Gas", Atti della Giornata Nazionale di Studio MIS-MAC III: Metodi di Sperimentazione nelle Macchine, pp. 109-120, 7 ottobre, Cagliari, stampato da SGE, Padova.
[26]  Desideri U. e Manfrida G., 1995, "Flow and turbulence Survey for a Model of Gas Turbine Exhaust Diffuser", ASME Paper 95-GT-139, presentato al 40th ASME International Gas Turbine and Aeroengine Congress and Exposition, 5-8 giugno Houston, TX, USA, stampato dall'American Society of Mechanical Engineers a New York, USA.
[27]  Bettagli N., Desideri U. e Fiaschi D., 1995, "A Biomass Combustion-Gasification Model: Validation and Sensitivity Analysis", Transactions of the ASME, Journal of Energy Resources Technology, Vol. 117, pp. 329-336, stampato dall'American Society of Mechanical Engineers a New York, USA, ISSN 0195-0738, doi:10.1115/1.2835431
[28]  Bidini G., Desideri U. e Scarpa M., 1996, "Previsione dei Fabbisogni di Energia Elettrica con Tecniche di Intelligenza Artificiale", Energia e Materie Prime, No. 113, febbraio, pp. 15-20.
[29]  Bidini, G., Desideri U. e Sabbatini F., 1996, "Study of the Steam Turbine Trip in a 20 MW Geothermal Plant", Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 210, pp. 223-232, stampato da Professional Engineering Publishing Ltd. a Bury St. Edmunds, U.K., ISSN 0957-6509.
[30]  Bidini G., Desideri U. e Di Maria, F., 1996, "Thermodynamic Analysis of Injected Water Recovery Systems for the Humid Air Turbine (HAT) Cycle", Proceedings of the ASME Advanced Energy Systems Division (Vol. AES 36), pp. 295-304, Ed. R.R. Bittle, A.B. Duncan, J. Fizdon S. Garimella, K. Herold, D.W. Nutter, Dennis O'Neal and B.G. Shiva Prasad, presentato al 1996 ASME International Mechanical Engineering Congress and Exposition, 17-22 novembre, Atlanta, GA, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-1527-7.
[31]  Bidini G. e Desideri U., 1997, "Study of Possible Optimisation Criteria for Geothermal Power Plants", Journal of Energy Conversion and Management, Vol. 38, No. 15-17, pp. 1681-1691, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0196-8904(96)00209-9] ISSN 0196-8904.
[32]  Desideri U., Fantozzi F., Bidini G., e Mathieu P., 1997, "Use of Artificial Neural Network for the Simulation of Combined Cycle Transients", ASME Paper 97-GT-442, presentato al 42nd ASME Gas Turbine and Aeroengine Congress, Exposition and Users Symposium, 2-5 giugno, Orlando, FL, USA, stampato dall'American Society of Mechanical Engineers a New York, USA.
[33]  Desideri U. e Di Maria F., 1997, "Water Recovery from HAT Cycle Exhaust Gas: A Possible Solution for Reducing Stack Temperature Problems", International Journal of Energy Research, Vol. 21, pp. 809-822, stampato da John Wiley & Sons a New York, USA, ISSN 0363-907X.
[34]  Bidini G., Desideri U. e Di Maria F., 1997, "Un Sistema Integrato con Gas Naturale, Fluido Geotermico e Rifiuti Solidi Urbani per la Produzione di Energia Elettrica", Atti del IX Congresso Nazionale "Tecnologie e Sistemi Energetici Complessi", pp.465-478, 26-27 giugno, Milano, stampato da SGE, Padova.
[35]  Bidini G., Desideri U., Di Maria F., Ribeiro Gallo W.L., 1997, "Humid Air Turbine (HAT) Cycle: State of the Art and Perspectives", Proceedings del III Congresso Latino-Americano: Geraçao e Trasmissao de Energia Elétrica, pp. 231-235, 9-13 novembre, Campos do Jordao, SP, Brasil, stampato da Sao Paolo State University a San Paolo, SP, Brasil.
[36]  Desideri U., 1997, "Condensatori", in Manuale Cremonese di Meccanica-Parte specialistica, Vol. IV, Sez. IV, Cap. 31, stampato da Edizioni Cremonese, Firenze.
[37]  Bidini G., Desideri U., Di Maria F., Baldacci A., Papale R. e Sabatelli F., 1998, "Optimization of an Integrated Gas Turbine-Geothermal Power Plant", Energy Conversion and Management, Vol. 39, No. 16-18, pp. 1945-1956, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0196-8904(98)00056-9] ISSN 0196-8904.
[38]  Bidini G., Desideri U., Saetta S. e Proietti Bocchini P., 1998, "Internal Combustion Engine Combined Heat and Power Plants: Case Study of the University of Perugia Power Plant", Applied Thermal Engineering, Vol. 18, No. 6, pp. 401-412, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S1359-4311(97)00051-3] ISSN 1359-4311.
[39]  Desideri U. e Corbelli R., 1998, "CO2 Capture in a Small Size Cogeneration Plants: Technical and Economical Considerations", Energy Conversion and Management, Vol. 39, No. 9, pp. 857-867, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0196-8904(97)10050-4] ISSN 0196-8904.
[40]  Desideri U. e Di Maria F., 1998, "Humid Air Turbine Cycles with Water Recovery: How to Dispose Heat in an Efficient Way", ASME Paper 98-GT-60, presentato al 43rd ASME International Gas Turbine and Aeroengine Congress and Exposition, 2-5 giugno, Stoccolma, Svezia, stampato dall'American Society of Mechanical Engineers a New York, USA.
[41]  Corti A, Facchini B., Manfrida G., e Desideri U., 1998, "Semi Closed Gas Turbine Cycle and Humid Air Turbine: Thermoeconomic Evaluation of Cycle Performance and of the Water Recovery Process", ASME Paper 98-GT-31, presentato al 43rd ASME International Gas Turbine and Aeroengine Congress and Exposition, 2-5 giugno, Stoccolma, Svezia, stampato dall'American Society of Mechanical Engineers a New York, USA.
[42]  Bidini G., Desideri U., e Fantozzi F., 1998, "Tecniche di Intelligenza Artificiale Applicate alla Regolazione della Velocità di una Galleria del Vento", Atti del 53° Congresso Nazionale dell'Associazione Termotecnica Italiana, Vol. II, pp. 973-984, 15-18 Settembre, Firenze, stampato da SGE, Padova.
[43]  Di Maria F.e Desideri U., 1998, "How the Water Section in the HAT Cycle can be an Efficient Power Output Modulator", Proceedings of the ASME Advanced Energy Systems Division (Vol. AES 38), pp. 47-54, Ed. H. Metghalchi, E. Kweller, M.L. Ramalingam, J.N. Chapman, presentato al 1998 ASME International Mechanical Engineering Congress and Exposition, 12-18 Novembre, Anaheim, CA, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-1599-4.
[44]  Fantozzi F. e Desideri U., 1998, "Simulation of Power Plants Transients with Artificial Neural Networks: Application to an existing Combined Cycle", Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 212, pp. 299-313, stampato da Professional Engineering Publishing Ltd. a Bury St. Edmunds, U.K., ISSN 0957-6509.
[45]  Bidini G., Desideri U. e Di Maria F., 1999, "A Single Flash Integrated Gas Turbine-Geothermal Power Plant With Non Condensable Gasses Combustion", Geothermics, Vol. 28, No. 1, pp. 131-150, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0375-6505(98)00048-0] ISSN 0375-6505.
[46]  Desideri U., Di Maria F. e Bidini G., 1999, "Sviluppo di un Sistema di Simulazione per Impianti Geotermici", in Tecniche di Progettazione Analisi, Gestione e Controllo degli Impianti Energetici, pp. 297-310, Ed. A. Mirandola, stampato da SGE, Padova
[47]  Desideri U. e Di Maria F., 1999, "Upgrading of a Small Size Gas Turbine to HAT Cycle Operation: Thermodynamic And Economic Analysis", ASME Paper 99-GT-372, presentato al 44th ASME International Gas Turbine and Aeroengine Congress and Exposition, 7-10 giugno, Indianapolis, IN, USA, stampato dall'American Society of Mechanical Engineers a New York, USA.
[48]  Desideri U. e Ubertini S., 1999, "Flow Field Measurements in an Annular Gas Turbine Exhaust Diffuser with Struts", ASME Paper 99-GT-418, presentato al 44th ASME International Gas Turbine and Aeroengine Congress and Exposition, 7-10 giugno, Indianapolis, IN, USA, stampato dall'American Society of Mechanical Engineers a New York, USA.
[49]  Desideri U. e Paolucci A., 1999, "Performance Modelling of a Carbon Dioxide Removal System for Power Plants", Energy Conversion and Management, Vol. 40, No. 18, pp. 1899-1915, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0196-8904(99)00074-6] ISSN 0196-8904.
[50]  Desideri, U. e Di Maria, F., 1999, "A Simulation Code for Design and Off-Design Performance Prediction of Geothermal Power Plants", Energy Conversion and Management, Vol. 41, No. 1, pp. 61-76, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0196-8904(99)00073-4] ISSN 0196-8904.
[51]  Di Maria, F. e Desideri, U., 1999, "A Simulation Code for Single Phase Geothermal Fields", Proceedings of the ASME Advanced Energy Systems Division (Vol. AES 39), pp. 489-495, Ed. S.M. Aceves, S. Garimella, R. Peterson, presentato al 1999 ASME International Mechanical Engineering Congress and Exposition, 14-19 Novembre, Nashville, Tennessee, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-1650-8.
[52]  Canovai, A., Bernardini, L., Valentini, F. e Desideri, U., 1999, "Possibilità di Trattamento di Biomasse da Raccolta Differenziata nell'Impianto di Trattamento Anaerobico dei Reflui Zootecnici sito nel Comune di Marciano-PG", pp. 247-259, Atti del 9° Convegno Nazionale Inquinamento dell'Aria e Tecniche di Riduzione, 29-30 Novembre, Rubano (PD), stampato da Università degli Studi di Padova, Padova.
[53]  Fantozzi, F., Diaconi Ferico, S. e Desideri, U., 2000, "Study of a cogeneration plant for agro-food industry", Applied Thermal Engineering, Vol. 20, No. 11, pp. 993-1017, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S1359-4311(99)00074-5] ISSN 1359-4311.
[54]  Desideri U. e Belli C., 2000, "Assessment of LNG Regasification Systems with Cogeneration", ASME Paper 2000-GT-165, presentato al 45th ASME Gas Turbine and Aeroengine Technical Congress and Exposition, 8-11 Maggio, Monaco, Germania, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN: 0-7918-1990-6
[55]  Desideri U. e Di Maria F., 2000, "A Steady State Calculation Model for Gas Turbine Thermal Enclosures", ASME Paper 2000-GT-320, presentato al 45th ASME Gas Turbine and Aeroengine Technical Congress and Exposition, 8-11 Maggio, Monaco, Germania, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN: 0-7918-1990-6.
[56]  Ubertini, S. e Desideri, U., 2000, "Flow development and turbulence length scales within an annular gas turbine exhaust diffuser", Experimental Thermal and Fluid Science, Vol. 22, No. 1-2, pp. 55-70, stampato da Pergamon, Oxford, U.K., [DOI:10.1016/S0894-1777(00)00011-X] ISSN: 0894-1777.
[57]  Ubertini, S. e Desideri, U., 2000, "Experimental performance analysis of an annular diffuser with and without struts", Experimental Thermal and Fluid Science, Vol. 22, No. 3-4, pp. 183-195, stampato da Pergamon, Oxford, U.K., [DOI:10.1016/S0894-1777(00)00025-X] ISSN: 0894-1777.
[58]  Desideri, U., Lunghi, P. e Ubertini, S., 2000, "Thermodynamic Analysis of a Molten Carbonate Fuel Cell Systems Using Waste Heat Derived Fuel", Proceedings of the ASME Advanced Energy Systems Division (Vol. AES 40), pp. 267-275, Ed. S. Garimella, M. Von Spakovsky, S. Somasundaram, presentato al 2000 ASME International Mechanical Engineering Congress and Exposition, 5-10 Novembre, Orlando, Florida, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-1907-8.
[59]  Fantozzi, F. e Desideri, U., 2000, "LO.CO.MO.DIA. Low Cost Monitoring for Diagnostic Purposes of a Small Scale CHP Plant", Proceedings of the ASME Advanced Energy Systems Division (Vol. AES 40), pp. 471-479, Ed. S. Garimella, M. Von Spakovsky, S. Somasundaram, presentato al 2000 ASME International Mechanical Engineering Congress and Exposition, 5-10 Novembre, Orlando, Florida, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-1907-8.
[60]  Bidini G., Desideri U. e Fantozzi F., 2000, "Experience in the Management of the Cogeneration Plant of the University of Perugia", Proceedings del IV Congreso Latino-Americano: Generacion Y Transporte de Energia Elétrica, 7-10 Novembre, Vina del Mar, Chile, stampato da Universidad Catolica de Valparaiso, Chile.
[61]  Desideri, U., Ercolani, P. e Yan, J., 2001, "Thermodynamic Analysis of Hydrogen Combustion Turbine Cycles", ASME Paper 2001-GT-95, presentato al 2001 ASME Gas Turbine and Aeroengine Technical Congress and Exposition, 4-7 Giugno, New Orleans, Louisiana, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN: 0-7918-3528-6
[62]  Desideri, U., Lunghi, P., Ubertini, S. e Burzacca, R., 2001, "Ideazione, Progettazione, Realizzazione e Start-up di un Test Rig per Celle a Combustibile", Atti del X Congresso Nazionale "Tecnologie e Sistemi Energetici Complessi", pp. 213-224, 21-22 giugno, Genova, stampato da SGE, Padova.
[63]  Di Maria, F., Bidini, G. e Desideri, U., 2001, "Applicazione di una Microturbina a Gas ad una Discarica di RSU", Atti del X Congresso Nazionale "Tecnologie e Sistemi Energetici Complessi", pp. 535-548, 21-22 giugno, Genova, stampato da SGE, Padova.
[64]  Lunghi, P., Ubertini S. e Desideri, U., 2001, "Highly efficient electricity generation through a hybrid molten carbonate fuel cell-closed loop gas turbine plant", Energy Conversion and Management, Vol. 42, No. 14, pp. 1657-1672, stampato da Pergamon a Oxford, U.K., [doi:10.1016/S0196-8904(00)00162-X] ISSN 0196-8904.
[65]  Fantozzi, F., Di Maria, F., Desideri, U., 2001, "Analisi Termodinamica di Micro-Turbina Alimentata con Gas di Pirolisi di RSU", Atti del 56° Congresso Nazionale dell'Associazione Termotecnica Italiana, Vol. 4, pp. 10-14 Settembre, Napoli, stampato da CUEN, Napoli.
[66]  Desideri, U., Lunghi, P., Burzacca, R., 2001, "Celle a combustibile e gassificazione per la trigenerazione da scarti industriali: criteri di progettazione, prestazioni e test case in un'industria alimentare", Atti del XXVIII Convegno Nazionale ANIMP/OICE/UAMI, Vol. II, pp.145-168, 25-26 Ottobre 2001, Spoleto, stampato da Animp Servizi s.r.l., Milano, ISBN 88-88198-02-4.
[67]  Desideri, U., Lunghi, P., Ubertini, S., 2001, "Design, Construction, Start-Up and First Experimental Trials of a Test Rig for Single Fuel Cells", Proceedings of the ASME Advanced Energy Systems Division-IMECE (AES Vol. 41), presentato al 2001 ASME International Mechanical Engineering Congress and Exposition, 11-16 November, New York, NY, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0791835529
[68]  Desideri, U., Di Maria, F., 2001, "Power Pipe: an Algorithm for Analysis for Single Phase, Steady State, Pipe Networks with Second-Degree Boundary Conditions", Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 215, pp. 519-525, stampato da Professional Engineering Publishing Ltd. a Bury St. Edmunds, U.K., [DOI: 10.1243/0957650011538659] ISSN 0957-6509
[69]  Ubertini S., Desideri, U., 2002, "Aerodynamic Investigation of a Scooter in the University of Perugia Wind Tunnel", SAE Paper 2002-01-0254, presentato al SAE 2002 World Congress, 4-7 Marzo, Detroit, MI, USA, stampato dalla Society of Automotive Engineers, a Detroit.
[70]  Desideri, U., Lunghi, P., Ubertini, S., 2002, "Feasibility and Performance of an Ambient Pressure MCFC Combined with a Commercial Gas Turbine", ASME Paper GT-2002-30650, presentato al ASME Turbo Expo: Land, Sea, Air 2002, 3-6 Giugno, Amsterdam, Paesi Bassi, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN: 0-7918-3601-0, doi: 10.1115/GT2002-30650
[71]  Fantozzi, F., Di Maria, F., Desideri, U., 2002, "Integrated Micro-Turbine and Rotary-Kiln Pyrolysis System as a Waste to Energy Solution for a Small Town in Central Italy-Cost Positioning and Global Warming Assessment", ASME Paper GT-2002-30652, presentato al ASME Turbo Expo: Land, Sea, Air 2002, 3-6 Giugno, Amsterdam, Paesi Bassi, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN: 0-7918-3601-0, doi: 10.1115/GT2002-30652
[72]  Desideri, U., Lunghi, P., Burzacca, R., 2002, "Advantages of integrated numerical and experimental approach for fuel cells performance evaluation: results for a molten carbonate single cell", Proceedings World Renewable Energy Congress VII & Expo, 29 Giugno-5 Luglio, Colonia, Germania.
[73]  Ubertini, S., Desideri, U., 2002, "Design and Validation of a Forced Ventilation Solar Collector Installed in a Public School", Proceedings ECOS 2002, 5-7 Luglio, Berlino, Germania.
[74]  Proietti, S., Desideri, U., 2002, "Analysis and Simulation of Distributed Cogeneration in the School Sector", Proceedings ECOS 2002, 5-7 Luglio, Berlino, Germania.
[75]  Lunghi, P., Bove, R., Desideri, U., 2002, "Analysis and optimization of hybrid MCFC gas turbine plants", Proceedings Fuel Cells-Science and Technology 2002, 25-26 Settembre, Amsterdam, Paesi Bassi, stampato da Elsevier Science Ltd., Paesi Bassi, Journal of Power Sources, 2004, Vol. 118, No. 1-2, pp. 108-117, [DOI:10.1016/S0378-7753(03)00068-5] ISSN 0378-7753.
[76]  Ubertini, S., Desideri, U., 2003, "Design of a solar collector for year-round cilmatisation", Renewable Energy, vol 28/4, pp. 623-645, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0960-1481(02)00071-X] ISSN 0960-1481.
[77]  Desideri, U., Proietti, S., 2002, "Analysis of energy consumption in the high schools of a province in Central Italy", Energy and Buildings, vol 34/10, pp. 1003-1016, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0378-7788(02)00025-7] ISSN 0378-7788.
[78]  Desideri, U., Proietti, S., 2002, "CO2 Capture and Removal System for a Gas-Steam Combined Cycle", ", Proceedings of the ASME Advanced Energy Systems Division-IMECE, presentato al 2002 ASME International Mechanical Engineering Congress and Exposition, 17-22 November, New Orleans, Louisiana, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN 0-7918-3626-6, doi:10.1115/IMECE2002-33296
[79]  Desideri, U., Lunghi, P., Burzacca, R., 2002, "Assessment of reversible and irreversible effect on fuel cell performances due to polluted fuels", Fuel Cell Seminar, 18-20 Novembre, Palm Springs, California, USA.
[80]  Lunghi, P., Ubertini, S., Desideri, U., 2002, "Combined design and experimental activity for future fuel cell plant definition, analysis comparison and optimisation", Fuel Cell Seminar, 18-20 Novembre, Palm Springs, California, USA.
[81]  Desideri, U., Di Maria, F., Leonardi, D., Proietti, S., 2003, "Sanitary Landfill Energetic Potential Analysis: a Real Case Study", Energy Conversion and Management, Vol. 44, No. 12, pp. 1969-1981, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0196-8904(02)00224-8] ISSN 0196-8904.
[82]  Bella, G., Ubertini, S., Desideri, U., 2003, "Experimental and Computational Analysis of the Aerodynamic Performances of a Maxi-Scooter", SAE Paper 2003-01-0998, presentato al SAE 2003 World Congress, 3-6 Marzo, Detroit, Michigan, USA, stampato dalla Society of Automotive Engineers a Detroit.
[83]  Desideri, U., Proietti, S., Masciotti, V., 2003, "Experimental Analysis, Monitoring and Control of Landfill Gas Emissions Through IR Thermography", Proceedings, 18th International Conference on Solid Waste Technology and Management, 23-26 Marzo, Philadelfia, Pennsylvania, USA, ISSN: 1091-8043.
[84]  Desideri, U., Proietti, S., Masciotti, V., 2003, "Analysis Of Landfill Gas Emissions Through IR Thermography In A Sanitary Landfill", presentato al 26th Annual Landfill Gas Symposium, 24-27 Marzo, Tampa, Florida, USA.
[85]  U. Desideri, S. Proietti, C. Romano, "Design And Optimization Of Energy Systems In An Eco-Sustainable Industrial Building", Proceedings of ECOS 2003, July 1-3, 2003, Copenaghen, Denmark
[86]  Ubertini, S., Desideri, U., 2003, "Performance estimation and experimental measurements of a photovoltaic roof", Renewable Energy, vol 28/12, pp. 1833-1850, stampato da Pergamon a Oxford, U.K., [DOI:10.1016/S0960-1481(03)00073-9] ISSN 0960-1481.
[87]  Desideri, U., Lunghi, P., and Burzacca, R., 2003, "State of the Art about the Effects of Impurities on MCFCs and Pointing Out of Additional Research for Alternative Fuel Utilization", presentato al First International Conference on Fuel Cell Science, Engineering and Technology, April 21-23, Rochester, New York, USA, ISBN 0-7918-3668-1, doi:10.1115/FUELCELL2003-1739
[88]  Desideri, U., 2003, "Perspectives on the Use of Molten Carbonate Fuel Cells with Renewable Energy Sources", Invited Keynote Lecture al First International Conference on Fuel Cell Science, Engineering and Technology, April 21-23, Rochester, New York, USA, ISBN 0-7918-3668-1, doi: 10.1115/FUELCELL2003-1702
[89]  Fantozzi, F., D'Alessandro, B., Desideri, U., 2003, "IPRP-Integrated Pyrolysis Regenerated Plant-An efficient and scalable concept for gas turbine based energy conversion from biomass and waste", ASME Paper GT2003-38653, presentato al ASME Turbo Expo: Land, Sea, Air 2003, 16-19 Giugno, Atlanta, Georgia, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, doi:10.1115/GT2003-38653, ASME Journal of Engineering for Gas Turbines and Power, Vol. 127, No. 2, April 2005, pp. 348-357 [DOI: 10.1115/1.1789513] ISSN: 0742-4795.
[90]  Ubertini S., Desideri U., 2003, "Energy Production and Performance of a Large Photovoltaic Roof", ASME Paper IJPGC2003-40100, Proceedings, 2003 International Joint Power Generation Conference, 16-19 Giugno, Atlanta, Georgia, USA, stampato dall'American Society of Mechanical Engineers a New York, USA, ISBN: 0-7918-3677-0, doi:10.1115/IJPGC2003-40100
[91]  Shah, R.K., Desideri, U., Hsueh, K.L., Vikar, A.V., 2003, "Research Opportunities And Challenges In Fuel Cell Science And Engineering", 4 th Baltic Heat Transfer Conference, August 25-27, 2003, Kaunas, Lithuania
[92]  Assadi, M., Bai, X.S., Chen, G., Corella, J., Desideri, U., Fantozzi, F., Sun, L., Toledo, J.M., Torisson, T., 2004, "A General Survey Concerning Electricity Production From Biomass", Proceedings, 2nd World Biomass Conference, May 10-14, 2004, Rome, Italy
[93]  Alemanno, G., Bidini, G., Desideri, U., 2004, "Biomass economy for energy use", Proceedings, 2nd World Biomass Conference, May 10-14, 2004, Rome, Italy
[94]  Desideri, U., Lunghi, P., Zepparelli, F., 2004, "A Comparison Between Life Cycle Assessment Of An MCFC System, An LFG-MCFC System, And Traditional Energy Conversion Systems", ASME Paper FuelCell2004-2489, Proceedings, Second International Conference on Fuel Cell Science, Engineering and Technology, June 15-18, 2004, Rochester, NY, USA, ISBN: 0-7918-4165-0, doi:10.1115/FUELCELL2004-2489
[95]  Lunghi, P., Bove, R., Desideri, U., 2004, "Life-Cycle-Assessment of Fuel Cells Based Landfill-Gas Energy conversion Technologies", Journal of Power Sources, Vol 131/1-2 pp 120-126, [DOI:10.1016/j.jpowsour.2004.01.006] ISSN 0378-7753
[96]  Lunghi, P., Bove, R., Desideri, U., 2004, "LCA of a molten carbonate fuel cell system", Journal of Power Sources, Vol. 137/2, pp. 239-247, [DOI:10.1016/j.jpowsour.2004.06.005] ISSN 0378-7753.
[97]  Corradetti, A., Desideri, U., 2004, "Analysis Of Gas-Steam Combined Cycles With Natural Gas Reforming And CO2 Capture", ASME Paper GT2004-54091, Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, & Air, June, 14-17, 2004, Vienna, Austria, ISBN: 0-7918-3739-4, doi: 10.1115/GT2004-54091, ASME Journal of Engineering for Gas Turbines and Power, Vol. 127, No. 3, July 2005, pp. 545-552 [DOI: 10.1115/1.1850941] ISSN: 0742-4795.
[98]  Fantozzi, F., Desideri, U., 2004, "Micro Scale Slow-Pyrolysis Rotary Kiln For Syngas And Char Production From Biomass And Waste: Design And Construction Of A Reactor Test Bench", ASME Paper GT2004-54186, Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, & Air, June, 14-17, 2004, Vienna, Austria, ISBN: 0-7918-3739-4, doi: 10.1115/GT2004-54186
[99]  Fantozzi, F., D'Alessandro, B., Leonardi, D., Desideri, U., 2004, "Evaluation of available technologies for chicken manure energy conversion and techno-economic assessment of a case study in Italy", ASME Paper GT2004-54185, Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, & Air, June, 14-17, 2004, Vienna, Austria, ISBN: 0-7918-3739-4, doi:10.1115/GT2004-54185
[100]  Desideri, U., Rossi, G., Giovannozzi, A., Maggiorana, P., 2004, "High Resolution Infrared Thermography For Airfoils Boundary Layer Inspection In Passive Mode", ASME Paper GT2004-53538, Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, & Air, June, 14-17, 2004, Vienna, Austria, ISBN: 0-7918-3739-4, doi: 10.1115/GT2004-53538
[101]  Desideri, U., Proietti, S., Arcioni, L., 2004, "Analysis And Statistic Evaluation Of Distributed Generation In Italy", Proceedings of ESDA04 7th Biennial Conference on Engineering Systems Design and Analysis July 19-22, 2004, Manchester, United Kingdom, doi:10.1115/ESDA2004-58129
[102]  Desideri, U., Proietti, S., Arcioni, L., Sensi, F., 2005, "Elaborazione ed Applicazione di una Metodologia per la Certificazione Energetica Degli Edifici Scolastici", Proceedings V° Congresso Nazionale Ciriaf, pp. 247-252, April 8-9, 2005, Perugia, Italy, ISBN: 88-89422-43-2.
[103]  Desideri, U., Zepparelli, F., 2005, "A Comparison Between the LCA of a PEMFC and an MCFC Systems for the Production of Electric Energy, and Traditional Energy Conversion Systems", ASME Paper FUELCELL2005-74073, Proceedings of the Third International Conference on Fuel Cell Science, Engineering and Technology, May 23-25, 2005, Ypsilanti, Michigan, USA, ISBN: 0-7918-3764-5, doi:10.1115/FUELCELL2005-74073
[104]  Desideri, U., Zaninelli, Lazaroiou, G., D., Lazaroiou C., 2005, "A Matlab-Simulink Analysis of Hybrid SOFC Dynamic Behavior", ASME Paper FUELCELL2005-74056, Proceedings of the Third International Conference on Fuel Cell Science, Engineering and Technology, May 23-25, 2005, Ypsilanti, Michigan, USA, ISBN: 0-7918-3764-5, doi:10.1115/FUELCELL2005-74056
[105]  Corradetti, A., Desideri, U., 2005, "Should biomass be used for power generation or hydrogen production?", ASME Paper GT2005-69040, Proceedings of ASME Turbo Expo 2005 Power for Land, Sea, & Air, June, 6-9, 2005, Reno-Tahoe, Nevada, USA, doi:10.1115/GT2005-69040, ASME Journal of Engineering for Gas Turbines and Power, Vol. 129, No. 3, July 2007, pp. 629-636 [DOI: 10.1115/1.2718226] ISSN: 0742-4795
[106]  Desideri, U., Zepparelli, F., 2005, "LCA of a PEMFCs car and comparison with ICE vehicle". Proceedings, 7th World Congress on 3R (Recovery, Recycling, Re-integration), September 25-29, 2005, Beijing, China.
[107]  Verducci, P., Desideri, U., Arcioni, L., Cesaretti, L., Leonardi, D., Casini, C., 2005, "Soluzioni progettuali per l'architettura sostenibile. Il contributo energetico delle serre all'interno di unità abitative ad uso residenziale: analisi progettuale e soluzioni costruttive", International seminar, October 27-29, 2005, Ravenna, Italy
[108]  Fantozzi, F., D'Alessandro, B., Bartocci, P., Colantoni, S., Crisostomi, L., Desideri, U., 2006, "IPRP (Integrated Pyrolysis Regenerated Plant)-Attività di ricerca e sviluppo in corso presso la facoltà di Ingegneria dell'Università di Perugia", Proceedings, MIS-MAC IX, 24 Marzo 2006, Trieste, Italy
[109]  Desideri U., Proietti S., Colantoni S., Arcioni L., Briso-Montiano Belmonte R., 2006, "Analisi e confronto tra due metodologie per la certificazione energetica degli edifici sviluppate in Italia e Spagna secondo la Direttiva 2002/91/CE", Proceedings, VI° Congresso Nazionale CIRIAF, pp. 141-146, April 7-8, 2006, Perugia, Italy, ISBN: 88-6074-018-5.
[110]  Corradetti, A., Desideri, U., 2006, "A Techno-Economic Analysis of Different Options for Cogenerating Power in Hydrogen Plants Based on Natural Gas Reforming", ASME Journal of Engineering for Gas Turbines and Power, Vol. 129, No. 2, April 2007, pp. 338-351 [DOI: 10.1115/1.2434346] ISSN: 0742-4795.
[111]  Proietti, S., Arcioni, L., Desideri, U., 2006, "Implementation of a System for the Analysis and Evaluation of Advantages of Distributed Generation", ASME Paper GT2006-90765, Proceedings of ASME Turbo Expo 2006 Power for Land, Sea, & Air, May, 8-11, 2006, Barcelona, Spain, ISBN: 0-7918-3774-2, doi:10.1115/GT2006-90765
[112]  Fantozzi, F., Colantoni S., Bartocci, P., Desideri, U., 2006, "Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste: Part 1: Working Envelope of the Reactor", ASME Paper GT2006-90818, Proceedings of ASME Turbo Expo 2006 Power for Land, Sea, & Air, May, 8-11, 2006, Barcelona, Spain, ISBN: 0-7918-3774-2, ASME Journal of Engineering for Gas Turbines and Power, Vol. 129, No. 4, October 2007, pp. 901-907 [DOI: 10.1115/1.2720521] ISSN: 0742-4795.
[113]  Fantozzi, F., Colantoni S., Bartocci, P., Desideri, U., 2006, "Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste: Part 2: Introducing Products Yields in the Energy Balance", ASME Paper GT2006-90819, Proceedings of ASME Turbo Expo 2006 Power for Land, Sea, & Air, May, 8-11, 2006, Barcelona, Spain, ASME Journal of Engineering for Gas Turbines and Power, Vol. 129, No. 4, October 2007, pp. 908-913 [DOI: 10.1115/1.2720539] ISSN: 0742-4795.
[114]  Corradetti, A., Desideri, U., 2006, "Analysis of Biomass Integrated Gasification Fuel Cell Plants in Industrial CHP Applications", ASME Paper FUELCELL2006-97113, Proceedings of Fuel Cell Science, Engineering and Technology, June, 19-21, 2006, Irvine, California, USA, ISBN: 0-7918-4247-9, doi:10.1115/FUELCELL2006-97113
[115]  Arcioni L., Leonardi D., Proietti S., Piccolino Boniforti A., Desideri U., 2006, "Prime applicazioni della metodologia per la Certificazione Energetica degli Edifici sviluppata dal Dipartimento di Ingegneria Industriale dell'Università di Perugia a cinque complessi immobiliari di nuova realizzazione in Umbria", Proceedings, 61° Congresso Nationale ATI, Vol. I, pp. 87-92, September 12-15, 2006, Perugia, Italy, ISBN: 88-6074-049-5.
[116]  Fantozzi F., Desideri U., Colantoni S., Bartocci P., 2006, "Pirolisi lenta in un reattore a tamburo rotante per la produzione di syngas e char da biomasse e rifiuti-Parte 1-Caratterizzazione operativa del reattore", Proceedings, 61° Congresso Nazionale ATI, Vol. II, pp. 547-554, September 12-15, 2006, Perugia, Italy, ISBN: 88-6074-049-5.
[117]  Fantozzi F., Desideri U., Colantoni S., Bartocci P., 2006, "Pirolisi lenta in un reattore a tamburo rotante per la produzione di syngas e char da biomasse e rifiuti-Parte 2-Introduzione dello schema cinetico di formazione dei prodotti all'interno del bilancio energetico", Proceedings, 61° Congresso Nazionale ATI, Vol. II, pp. 555-560, September 12-15, 2006, Perugia, Italy, ISBN: 88-6074-049-5.
[118]  Proietti, S., Arcioni, L., Corradetti, A., Desideri, U., Pogliano, P., Caspani, G., 2006, "Analisi Tecnico-Economica e valutazione comparativa dell'utilizzo di turbine a gas e motori endotermici in applicazioni di cogenerazione industriale di piccola taglia" Proceedings, 61° Congresso Nationale ATI, Vol. II, pp. 659-664, September 12-15, 2006, Perugia, Italy, ISBN: 88-6074-049-5.
[119]  Baratella, A., Corradetti, A., Desideri, U., Lisbona, P. and Lunghi, P., 2006, "Oriented-Control Modeling of a SOFC Stack: Transient Analysis of System Response to External Perturbations". Proceedings of the 10th International Symposium on Solid Oxide Fuel Cells (SOFC-X), Vol. 7, Issue 1, pp. 1995-2003, June 3-8, 2007, Nara, Japan, [doi:10.1149/1.2729312]
[120]  Desideri U., Arcioni L., Leonardi D., Zepparelli F., Sorbi N., Cocchi S., 2007, "Studio di fattibilità tecnico economico di un impianto di condizionamento a pompa di calore geotermico e confronto con modello di calcolo attraverso il software di simulazione TRNSYS", Proceedings, VII° Congresso Nazionale CIRIAF, pp. 269-274, March 30-31, 2007, Perugia, Italy, ISBN: 978-88-6074-089-2.
[121]  Desideri U., Lunghi P., Proietti S., Mancini A., Terzoni P., 2007, "Efficienza energetica degli scaldacqua elettrici ad accumulo per uso domestico: progetto di Norma Europea prEN50440, metodi di prova e analisi dei risultati ottenuti nel Laboratorio Prove R&D della MTS Group", Proceedings, VII° Congresso Nazionale CIRIAF, pp. 275-280, March 30-31, 2007, Perugia, Italy, ISBN: 978-88-6074-089-2.
[122]  Corradetti, A., Rao, A.D., Desideri, U., 2007, "A Novel Concept for Combined Heat and Cooling in Humid Gas Turbine Cycles", ASME Paper GT2007-27718, Proceedings of ASME Turbo Expo 2007 Power for Land, Sea, & Air, May, 14-17, 2007, Montreal, Canada, ISBN: 0-7918-3796-3
[123]  Colantoni, S., Corradetti, A., Desideri, U., Fantozzi, F., 2007, "Thermodynamic Analysis and possible applications of the Integrated Pyrolysis Fuel Cell Plant (IPFCP)", ASME Paper GT2007-27713, Proceedings of ASME Turbo Expo 2007 Power for Land, Sea, & Air, May, 14-17, 2007, Montreal, Canada, ISBN: 0-7918-3796-3
[124]  Fantozzi, F., D'Alessandro, B., Desideri, U., 2007, "An IPRP (Integrated Pyrolysis Regenerated Plant) Microscale Demonstrative Unit In Central Italy", ASME Paper GT2007-28000, Proceedings of ASME Turbo Expo 2007 Power for Land, Sea, & Air, May, 14-17, 2007, Montreal, Canada, ISBN: 0-7918-3796-3
[125]  Arcioni, A., Corradetti, A., Desideri, U., Proietti, S., Pogliano, P., Caspani, G., 2007, "Techno-Economic Analysis And Comparative Evaluation of the Use of Gas Turbines and Reciprocating Engines in Small Size Applications of Industrial Cogeneration, ASME Paper GT2007-27726, Proceedings of ASME Turbo Expo 2007 Power for Land, Sea, & Air, May, 14-17, 2007, Montreal, Canada, ISBN: 0-7918-3796-3
[126]  Barelli L., Bidini G., Corradetti A., Desideri U., 2007, "Study of the carbonation-calcination reaction applied to the hydrogen production from syngas", Energy, Vol. 32, No. 5, pp.697-710, [DOI:10.1016/j.energy.2006.04.016] ISSN: 0360-5442.
[127]  Barelli L., Bidini G., Corradetti A., Desideri U., 2007, "Production of hydrogen through the carbonation-calcination reaction applied to CH4/CO2 mixtures", Energy, Vol. 32, No. 5, pp.834-843, [DOI:10.1016/j.energy.2006.06.008] ISSN: 0360-5442.
[128]  Arcioni, L., Tozzi, M., Desideri, U., 2007, "Project Hypothesis For Carbon Capture And Storage In Northern Italy", IGEC III Conference, June 17-19, 2007, Vasteras, Sweden, pubblicato su International Journal of Energy Research, 2008, Volume 32, Issue 12, pages 1175-118, [DOI: 10.1002/er.1454], Online ISSN: 1099-114X, Print ISSN: 0363-907X.
[129]  Desideri, U., Proietti, S., Arcioni, L., Leonardi, D., Sdringola, P., 2007, "Comparative Analysis of Three Methodologies for the Energy Certification Applied to Residential Buildings, Developed in Italy in Conformity with European Directive EPBD 2002/91", Proceedings of the 20th International Conference on Efficiency Cost, Optimization, Simulation and Environmental Impact of Energy Systems ECOS 2007, June 25-28, Padua, Italy, pp. 1495-1508, ISBN: 88-89884-08-8.
[130]  Geldermann J., Schollenberger H., Rentz O., Huppes G., van Oers L., France C., Nebel B., Clift R., Lipkova A., Saetta S., Desideri U., May T., 2007, "An integrated scenario analysis for the metal coating sector in Europe", Technological Forecasting and Social Change, Vol. 74, No., 8, pp. 1482-1507, [DOI:10.1016/j.techfore.2006.12.002] ISSN: 0040-1625.
[131]  Desideri U., Verducci P., Leonardi D., Sorbi N., Arcioni L., Laranci P., Colantoni S., Cesaretti L., 2007, "Analisi del comportamento termo-fluidodinamico di un laterizio ventilato attraverso il confronto di modelli di simulazione numerica e di modelli di calcolo semplificato", Proceedings, 62° Congresso Nationale ATI, Vol. I, pp. 245-250, September 11-14, 2007, Salerno, Italy, ISBN: 978-88-87998-77-1
[132]  Desideri, U., Leonardi, D., Proietti, S., 2007, "Application Of Infrared Thermography To Study Behaviour Of Biogas Captation Wells", Proceedings Sardinia 2007, Eleventh International Waste Management and Landfill Symposium, October 1-5, 2007, Santa Margherita di Pula, Italy, ISBN: 978-88-6265-003-8
[133]  Desideri U., 2008, "Le alternative di utilizzo energetico del biogas", in Biogas da rifiuti solidi urbani, Editors: R. Vismara, F. Malpei, M. Centemero, pubblicato da Dario Flaccovio Editore, pp. 129-146, ISBN 978-88-7758-833-3.
[134]  Desideri U., Arcioni L., Leonardi D., Stella L., 2008, "Lo Standard "Casa Passiva": un caso studio", Proceedings, VIII° Congresso Nazionale CIRIAF.
[135]  Desideri U., Sorbi N., Arcioni L., Leonardi D., 2008, "Comparative Analysis of Thermal Behaviour of a Building by Infrared Thermography and TRNSYS Simulations", Proceedings ECOS 2008, Krakow, Poland, June 24-27.
[136]  Desideri U., Poggesi C., Leonardi D., Arcioni L., 2008, "Life cycle assessment of a roof-top grid connected Photovoltaic system", Proceedings IGEC-IV 2008, Beijing, China.
[137]  Fantozzi F., Bartocci P., Bidini G., Desideri U., 2008, "Rotary kiln pyrolysis stimate of product yields for different types of biomass, through modelling", Proceedings 16th European Biomass Conference & Exhibition. Valencia, Spain, 2-6th June.
[138]  Bidini G., Fantozzi F., Desideri U., D'Alessandro B., 2008, "Microcogenerazione da biomassa con tecnologia di pirolisi", La Termotecnica, p. 62-68, ISSN: 0040-3725
[139]  Desideri U., Garroni E., Proietti, S., 2009, "Repowering of a Gas Turbine based CHP in a Pulp and Paper Industry", ASME Paper GT2009-60233, Proceedings of ASME Turbo Expo 2009 Power for Land, Sea, & Air, June, 8-12, 2009, Orlando, Florida, ISBN: 9-7807-9183-8495
[140]  Desideri U., Proietti S., Sdringola P., 2009, "Solar-powered cooling systems: Technical and economic analysis on industrial refrigeration and air-conditioning applications", Applied Energy, Vol 86, pp. 1376-1386, [doi:10.1016/j.apenergy.2009.01.011], ISSN 0306-2619
[141]  Fantozzi F., D'Alessandro B., Bartocci P., Desideri U., Bidini G., 2009, "Performance evaluation of the IPRP technology when fuelled with biomass residuals and waste feedstocks", ASME Paper GT2009-60233, Proceedings of ASME Turbo Expo 2009 Power for Land, Sea, & Air, June, 8-12, 2009, Orlando, Florida, ISBN: 9-7807-9183-8495
[142]  Colantoni S., Della Gatta S., De Prosperis R., Russo A., Fantozzi F., Desideri U., 2009, Gas turbines fired with biomass pyrolysis syngas: analysis of the overheating of hot gas path components", ASME Paper GT2009-60233, Proceedings of ASME Turbo Expo 2009 Power for Land, Sea, & Air, June, 8-12, 2009, Orlando, Florida, ISBN: 9-7807-9183-8495. ASME Journal of Engineering for Gas Turbines and Power, Vol. 132, No. 6, June 2010, pp. [DOI: 10.1115/1.4000134] ISSN: 0742-4795.
[143]  Desideri U., Leonardi D., Arcioni L., Pierassa L., Pignani Piccioni V., 2009, "Analysis of different methodologies for energy and environmental certification applied to a residential building in central Italy", Proceedings ECOS 2009, Foz do Iguaçu, Brasil, 31 August-3 September.
[144]  Desideri U., Sorbi N., Leonardi D., Arcioni L., Abbati V., 2009, "Construction materials in civil engineering: study of emissivity using thermography", Proceedings ECOS 2009, Foz do Iguaçu, Brasil, 31 August-3 September 2009
[145]  Desideri U.; Proietti S.; Sdringola P.; Curbis F. 2009. Analysis of Emissions in Atmosphere of the Cogeneration and District Heating Plant in Norcia (Italy). In: Proceedings of the 22nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. ABCM Proceedings Editors, Brasile: 967-976, 31 Agosto-3 Settembre. Foz do Iguçu, Paranà, Brasile
[146]  Desideri U.; Proietti S.; Sdringola P. 2009. Integrated Planning of a Multifunctional Complex in Perugia: Sustainable Building Solutions and Energy-Environmental Certification. In: Proceedings of the 22nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. ABCM Proceedings Editor, Brasile: 977-986, 31 Agosto-3 Settembre. Foz do Iguçu, Paranà, Brasile
[147]  F. FANTOZZI; B. D'ALESSANDRO; P. BARTOCCI; U. DESIDERI; G. BIDINI 2010. Assessment of the energy conversion of whole oil fruits with a pyrolysis and gas turbine process (IPRP). In: Proceedings of ASME Turbo Expo 2010 Power for Land, Sea, and Air. 14-18 June 2010. Glasgow, UK, ISBN 9780791838723
[148]  Desideri U., 2010, "Advanced absorption processes and technology for carbon dioxide (CO2) capture in power plants", Chapter 5 of the book "Developments and innovation in carbon dioxide (CO2) capture and storage technology", Ed. Maroto-Valer, Woodhead Publishing, Cambridge, U.K., ISBN 9-781845-695330.
[149]  Desideri U., Proietti S., Sdringola P., Taticchi P., Carbone P., Tonelli F., 2010, "Integrated Approach to a Multifunctional Complex: Sustainable Design, Building Solutions and Certifications", Management of Environmental Quality, Vol. 21, N. 5, pp. 659-679, [doi:10.1108/14777831011067944], ISSN 1477-7835
[150]  F. Fantozzi; B. D'Alessandro; P. Bartocci; U. Desideri; G. Bidini 2010. Assessment of the energy conversion of whole oil fruits with a pyrolysis and gas turbine process (IPRP). In: Proceedings of ASME Turbo Expo 2010 Power for Land, Sea, and Air. 14-18 June 2010. Glasgow, UK, ISBN 9780791838723
[151]  U. Desideri, D. Bacchettini, L. Arcioni, D. Leonardi, 2011. Methodology for the Implementation of an Energy Cadastre: a Case Study, in Energy solutions for a sustainable world-Proceedings of the Third International Conference on Applied Energy. Desideri, U. and Yan J. eds.. Tree, Milan, Italy, pp. 369-380, ISBN: 9788890584305
[152]  U. Desideri, P. Sdringola, D. Leonardi, L. Arcioni, 2011. European Project Educa-Rue: An example of energy efficiency paths in educational building, in Energy solutions for a sustainable world-Proceedings of the Third International Conference on Applied Energy. Desideri, U. and Yan J. eds.. Tree, Milan, Italy, pp. 1277-1292, ISBN: 9788890584305
[153]  S. Proietti, P. Sdringola, M. Canneori, U. Desideri, 2011. An experimental analysis of impact of "Environmental Communication" on energy savings related to Ecolabel Certification for accommodation facilities: the case of Hotel Los Angeles in Assisi (Italy), in Energy solutions for a sustainable world-Proceedings of the Third International Conference on Applied Energy. Desideri, U. and Yan J. eds.. Tree, Milan, Italy, pp. 1377-1394, ISBN: 9788890584305
[154]  B. D'Alessandro, M. D'Amico, U. Desideri, F. Fantozzi, 2011. The IPRP Technology: from concept to demonstration, in Energy solutions for a sustainable world-Proceedings of the Third International Conference on Applied Energy. Desideri, U. and Yan J. eds.. Tree, Milan, Italy, pp. 1797-1808, ISBN: 9788890584305
[155]  Scappaticci, G. Risitano, M. Battistoni, U. Desideri, C.N. Grimaldi, 2011. On the influence of skin friction drag in road motorcycles aerodynamic efficiency, in Energy solutions for a sustainable world-Proceedings of the Third International Conference on Applied Energy. Desideri, U. and Yan J. eds.. Tree, Milan, Italy, pp. 2479-2488, ISBN: 9788890584305
[156]  G. Cinti, E. Rondini, U. Desideri, 2011. Development of a model of μCHP for residential application based on SOFC planar technology, in Energy solutions for a sustainable world-Proceedings of the Third International Conference on Applied Energy. Desideri, U. and Yan J. eds.. Tree, Milan, Italy, pp. 2833-2844, ISBN: 9788890584305
[157]  U. Desideri, S. Proietti, F. Zepparelli, P. Sdringola, S. Bini, 2011. Life Cycle Assessment of a ground-mounted 1.778 kWp photovoltaic plant and comparison with traditional energy production systems, in Energy solutions for a sustainable world-Proceedings of the Third International Conference on Applied Energy. Desideri, U. and Yan J. eds.. Tree, Milan, Italy, pp. 3369-3388, ISBN: 9788890584305
[158]  G. Cinti, D. Penchini, G. Discepoli, E. Sisani, U. Desideri, 2011. Experimental comparison and performance evaluation of planar Solid Oxide single cell, ASME Paper ESFuelCell2011-54760, Proceedings of the 2011 Energy Sustainability & Fuel Cell Conference, 7-10 Agosto, Washington, DC, USA.
[159]  U. Desideri, N. Sorbi, L. Arcioni, D. Leonardi, 2011. Feasibility study and numerical simulation of a ground source heat pump plant applied to a residential building, Applied Thermal Engineering, Vol. 31, pp. 3500-3511, [doi:10.1016/j.applthermaleng.2011.07.003], ISSN 1359-4311.